diff options
author | Björn Stenberg <bjorn@haxx.se> | 2002-03-28 09:55:46 +0000 |
---|---|---|
committer | Björn Stenberg <bjorn@haxx.se> | 2002-03-28 09:55:46 +0000 |
commit | 3c0b90c0d3194d42def64c262625f0e11ab97771 (patch) | |
tree | 8f97818ac5940b717a8adbdbe2dc406c4559e875 /www/mods | |
parent | f57d3c28d6c03c126323251638014d1aa7c83899 (diff) | |
download | rockbox-3c0b90c0d3194d42def64c262625f0e11ab97771.tar.gz rockbox-3c0b90c0d3194d42def64c262625f0e11ab97771.zip |
Updates
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@42 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'www/mods')
-rw-r--r-- | www/mods/disassemble.t | 6 | ||||
-rw-r--r-- | www/mods/rs232.t | 2 |
2 files changed, 4 insertions, 4 deletions
diff --git a/www/mods/disassemble.t b/www/mods/disassemble.t index 7b50f18bca..e5941bd2ee 100644 --- a/www/mods/disassemble.t +++ b/www/mods/disassemble.t | |||
@@ -20,10 +20,10 @@ Use your thumb nails to compress the thin edge of the rubber while gently pullin | |||
20 | Do the same on the side. | 20 | Do the same on the side. |
21 | <hr> | 21 | <hr> |
22 | 22 | ||
23 | <p><img src="b9.jpg"> | 23 | <p><img src="b9.jpg"> <img src="b11.jpg"> |
24 | <br> | 24 | <br> |
25 | You have liberated one end of the Archos from the metal back plate! | 25 | You have now freed one end of the Archos. |
26 | Now lightly lift the blue rubber bumbers up from the circuit board on the other end, then slide the Archos out of the back plate. | 26 | Now lift the blue rubber bumbers up from the circuit board on the other end, and simply slide the Archos out of its' back plate. |
27 | 27 | ||
28 | <p><i>Björn</i> | 28 | <p><i>Björn</i> |
29 | 29 | ||
diff --git a/www/mods/rs232.t b/www/mods/rs232.t index 952922e4da..6abcea310b 100644 --- a/www/mods/rs232.t +++ b/www/mods/rs232.t | |||
@@ -12,7 +12,7 @@ It takes its power from the DTR signal in the serial port, so the communication | |||
12 | 12 | ||
13 | <h2>How to power it the safe way</h2> | 13 | <h2>How to power it the safe way</h2> |
14 | <p> | 14 | <p> |
15 | It is also possible to take power from the USB port, or another 5-10V source. Just remove the D1 diode and connect the power to the +5V and GND pads. | 15 | If your PC is a laptop or otherwise might risk having too little power in the serial port, it is also possible to take power from the USB port or another 5-10V source. Just remove the D1 diode and connect the power to the +5V and GND pads. |
16 | 16 | ||
17 | <h2>How to make one</h2> | 17 | <h2>How to make one</h2> |
18 | 18 | ||