Consistent use of Hz, kHz, dB, dbFS, ms, s and min. Add spaces between number and unit -- e.g. '5 dB'.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25648 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 7 insertions, 6 deletions

diff --git a/manual/configure_rockbox/display_options.tex b/manual/configure_rockbox/display_options.tex
index 23673e2482..b4b6b662ab 100644
--- a/manual/configure_rockbox/display_options.tex
+++ b/manual/configure_rockbox/display_options.tex
@@ -32,14 +32,15 @@
         \item[Backlight Fade In.]
         The amount of time that the backlight will take to fade from off to on
         after a button is pressed. If set to \setting{Off} the backlight will
-        turn on immediately, with no fade in. Can also be set to \setting{500ms},
-        \setting{1s} or \setting{2s}.
+        turn on immediately, with no fade in. Can also be set to 
+        \setting{500 ms}, \setting{1 s} or \setting{2 s}.
         \item[Backlight Fade Out.]
         Like Backlight fade in, this controls the amount of time that the
         backlight will take to fade from on to off after a button is pressed. If
         set to \setting{Off} the backlight will turn off immediately, with no
-        fade out. Other valid values: \setting{500ms}, \setting{1s},
-        \setting{2s}, \setting{3s}, \setting{4s}, \setting{5s} or \setting{10s}.
+        fade out. Other valid values: \setting{500 ms}, \setting{1 s},
+        \setting{2 s}, \setting{3 s}, \setting{4 s}, \setting{5 s} or 
+        \setting{10 s}.
       }
       \opt{backlight_fade_bool}{
         \item[Backlight Fade In.]
@@ -199,10 +200,10 @@
       \item[Peak Release.]
         This determines how fast the bar shrinks when the music becomes
         softer. Lower values make the peak meter look smoother.
-        Expressed in scale units per 10ms.
+        Expressed in scale units per 10 ms.
       \item[Peak Hold Time.]
         Specifies the time after which the peak indicator will reset.
-        For example, if you set this value to 5s, the peak indicator displays
+        For example, if you set this value to 5 s, the peak indicator displays
         the loudest volume value that occurred within the last 5 seconds.
         Larger values are useful if you want to find the peak level of a song,
         which might be of interest when copying music from the \dap\ via the