[1/4] Remove SH support and all archos targets

This removes all code specific to SH targets

Change-Id: I7980523785d2596e65c06430f4638eec74a06061

1 files changed, 0 insertions, 51 deletions

diff --git a/firmware/target/sh/archos/recorder/backlight-target.h b/firmware/target/sh/archos/recorder/backlight-target.h
deleted file mode 100644
index c3dd395eca..0000000000
--- a/firmware/target/sh/archos/recorder/backlight-target.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2007 by Jens Arnold
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef BACKLIGHT_TARGET_H
-#define BACKLIGHT_TARGET_H
-
-#include "config.h"
-#include "rtc.h"
-
-#define backlight_hw_init() true
-
-static inline void backlight_hw_on(void)
-{
-    rtc_write(0x13, 0x10); /* 32 kHz square wave */
-    rtc_write(0x0a, rtc_read(0x0a) | 0x40); /* Enable square wave */
-}
-
-static inline void backlight_hw_off(void)
-{
-    /* While on, backlight is flashing at 32 kHz.  If the square wave output
-       is disabled while the backlight is lit, it will become constantly lit,
-       (brighter) and slowly fade.  This resets the square wave counter and
-       results in the unlit state */
-    unsigned char rtc_0a = rtc_read(0x0a) & ~0x40;
-    rtc_write(0x0a, rtc_0a);        /* Disable square wave */
-    rtc_write(0x13, 0xF0);          /* 1 Hz square wave */
-    rtc_write(0x0a, rtc_0a | 0x40); /* Enable square wave */
-
-    /* When the square wave output is disabled in the unlit state,
-       the backlight stays off */
-    rtc_write(0x0a, rtc_0a);
-}
-
-#endif