New port: Shanling Q1 native

- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage

Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.

There's a few minor known issues:

- Bootloader must be installed manually using 'usbboot' as there is
  no support in jztool yet.

- Keymaps may be lacking, need further testing and feedback.

- Some plugins may not be fully adapted to the screen size and could
  benefit from further tweaking.

- LCD shows abnormal effects under some circumstances: for example,
  after viewing a mostly black screen an afterimage appears briefly
  when going back to a brightly-lit screen. Sudden power-off without
  proper shutdown of the backlight causes a "dissolving" effect.

- CW2015 battery reporting driver is buggy, and disabled for now.
  Battery reporting is currently voltage-based using the AXP192.

Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a

1 files changed, 12 insertions, 1 deletions

diff --git a/firmware/target/mips/ingenic_x1000/msc-x1000.c b/firmware/target/mips/ingenic_x1000/msc-x1000.c
index 3b7df1dd01..d0359a53e2 100644
--- a/firmware/target/mips/ingenic_x1000/msc-x1000.c
+++ b/firmware/target/mips/ingenic_x1000/msc-x1000.c
@@ -42,7 +42,7 @@
 #define DEBOUNCE_TIME (HZ/10)
 
 static const msc_config msc_configs[] = {
-#ifdef FIIO_M3K
+#if defined(FIIO_M3K)
 #define MSC_CLOCK_SOURCE X1000_CLK_SCLK_A
     {
         .msc_nr = 0,
@@ -52,6 +52,17 @@ static const msc_config msc_configs[] = {
         .cd_gpio = GPIO_MSC0_CD,
         .cd_active_level = 0,
     },
+#elif defined(SHANLING_Q1)
+#define MSC_CLOCK_SOURCE  X1000_CLK_MPLL
+    {
+        .msc_nr = 0,
+        .msc_type = MSC_TYPE_SD,
+        .bus_width = 4,
+        .label = "microSD",
+        .cd_gpio = GPIO_MSC0_CD,
+        .cd_active_level = 0,
+    },
+    /* NOTE: SDIO wifi card is on msc1 */
 #else
 # error "Please add X1000 MSC config"
 #endif