From 4c60bc9e681865fcfc149775a1ed7ccd2613d5bf Mon Sep 17 00:00:00 2001 From: Aidan MacDonald Date: Sun, 23 May 2021 17:30:58 +0100 Subject: New port: Shanling Q1 native - Audio playback works - Touchscreen and buttons work - Bootloader works and is capable of dual boot - Plugins are working - Cabbiev2 theme has been ported - Stable for general usage Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps. There's a few minor known issues: - Bootloader must be installed manually using 'usbboot' as there is no support in jztool yet. - Keymaps may be lacking, need further testing and feedback. - Some plugins may not be fully adapted to the screen size and could benefit from further tweaking. - LCD shows abnormal effects under some circumstances: for example, after viewing a mostly black screen an afterimage appears briefly when going back to a brightly-lit screen. Sudden power-off without proper shutdown of the backlight causes a "dissolving" effect. - CW2015 battery reporting driver is buggy, and disabled for now. Battery reporting is currently voltage-based using the AXP192. Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a --- firmware/target/mips/ingenic_x1000/msc-x1000.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'firmware/target/mips/ingenic_x1000/msc-x1000.c') diff --git a/firmware/target/mips/ingenic_x1000/msc-x1000.c b/firmware/target/mips/ingenic_x1000/msc-x1000.c index 3b7df1dd01..d0359a53e2 100644 --- a/firmware/target/mips/ingenic_x1000/msc-x1000.c +++ b/firmware/target/mips/ingenic_x1000/msc-x1000.c @@ -42,7 +42,7 @@ #define DEBOUNCE_TIME (HZ/10) static const msc_config msc_configs[] = { -#ifdef FIIO_M3K +#if defined(FIIO_M3K) #define MSC_CLOCK_SOURCE X1000_CLK_SCLK_A { .msc_nr = 0, @@ -52,6 +52,17 @@ static const msc_config msc_configs[] = { .cd_gpio = GPIO_MSC0_CD, .cd_active_level = 0, }, +#elif defined(SHANLING_Q1) +#define MSC_CLOCK_SOURCE X1000_CLK_MPLL + { + .msc_nr = 0, + .msc_type = MSC_TYPE_SD, + .bus_width = 4, + .label = "microSD", + .cd_gpio = GPIO_MSC0_CD, + .cd_active_level = 0, + }, + /* NOTE: SDIO wifi card is on msc1 */ #else # error "Please add X1000 MSC config" #endif -- cgit v1.2.3