Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 64 insertions, 0 deletions

diff --git a/firmware/target/arm/olympus/mrobe-100/button-target.h b/firmware/target/arm/olympus/mrobe-100/button-target.h
new file mode 100644
index 0000000000..99f17bb09b
--- /dev/null
+++ b/firmware/target/arm/olympus/mrobe-100/button-target.h
@@ -0,0 +1,64 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$

+ *

+ * Copyright (C) 2008 by Mark Arigo

+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include <stdbool.h>
+#include "config.h"
+
+#define HAS_BUTTON_HOLD
+
+bool button_hold(void);
+void button_init_device(void);
+int button_read_device(void);
+
+/* Power button is on GPIOA */
+#define BUTTON_POWER        0x80
+#define POWEROFF_BUTTON     BUTTON_POWER
+#define POWEROFF_COUNT      10
+
+/* Hold button is on GPIOD */
+#define BUTTON_HOLD         0x10
+

+/* FIXME: Until the buttons are figured out, we use the button definitions
+   for the H10 keypad & remote. THESE ARE NOT CORRECT! */
+

+/* Main unit's buttons */

+#define BUTTON_LEFT         0x00000002

+#define BUTTON_RIGHT        0x00000004

+#define BUTTON_REW          0x00000008

+#define BUTTON_PLAY         0x00000010

+#define BUTTON_FF           0x00000020

+#define BUTTON_SCROLL_UP    0x00000040

+#define BUTTON_SCROLL_DOWN  0x00000080

+#define BUTTON_MAIN         (BUTTON_POWER|BUTTON_O|BUTTON_BACK|BUTTON_REW\

+                            |BUTTON_PLAY|BUTTON_FF)

+

+/* Remote control's buttons */
+#define BUTTON_RC_REW       0x00080000
+#define BUTTON_RC_PLAY      0x00100000
+#define BUTTON_RC_FF        0x00200000
+#define BUTTON_RC_VOL_UP    0x00400000
+#define BUTTON_RC_VOL_DOWN  0x00800000
+#define BUTTON_REMOTE (BUTTON_RC_PLAY|BUTTON_RC_VOL_UP|BUTTON_RC_VOL_DOWN\
+                |BUTTON_RC_REW|BUTTON_RC_FF)
+#define RC_POWEROFF_BUTTON  BUTTON_RC_PLAY
+
+#endif /* _BUTTON_TARGET_H_ */