From e66ddd754fba4171e3fd99c5a1b911ed3f9faa3f Mon Sep 17 00:00:00 2001 From: Mark Arigo Date: Wed, 9 Jan 2008 07:24:43 +0000 Subject: Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657 --- .../target/arm/olympus/mrobe-100/button-target.h | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 firmware/target/arm/olympus/mrobe-100/button-target.h (limited to 'firmware/target/arm/olympus/mrobe-100/button-target.h') diff --git a/firmware/target/arm/olympus/mrobe-100/button-target.h b/firmware/target/arm/olympus/mrobe-100/button-target.h new file mode 100644 index 0000000000..99f17bb09b --- /dev/null +++ b/firmware/target/arm/olympus/mrobe-100/button-target.h @@ -0,0 +1,64 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 by Mark Arigo + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#ifndef _BUTTON_TARGET_H_ +#define _BUTTON_TARGET_H_ + +#include +#include "config.h" + +#define HAS_BUTTON_HOLD + +bool button_hold(void); +void button_init_device(void); +int button_read_device(void); + +/* Power button is on GPIOA */ +#define BUTTON_POWER 0x80 +#define POWEROFF_BUTTON BUTTON_POWER +#define POWEROFF_COUNT 10 + +/* Hold button is on GPIOD */ +#define BUTTON_HOLD 0x10 + +/* FIXME: Until the buttons are figured out, we use the button definitions + for the H10 keypad & remote. THESE ARE NOT CORRECT! */ + +/* Main unit's buttons */ +#define BUTTON_LEFT 0x00000002 +#define BUTTON_RIGHT 0x00000004 +#define BUTTON_REW 0x00000008 +#define BUTTON_PLAY 0x00000010 +#define BUTTON_FF 0x00000020 +#define BUTTON_SCROLL_UP 0x00000040 +#define BUTTON_SCROLL_DOWN 0x00000080 +#define BUTTON_MAIN (BUTTON_POWER|BUTTON_O|BUTTON_BACK|BUTTON_REW\ + |BUTTON_PLAY|BUTTON_FF) + +/* Remote control's buttons */ +#define BUTTON_RC_REW 0x00080000 +#define BUTTON_RC_PLAY 0x00100000 +#define BUTTON_RC_FF 0x00200000 +#define BUTTON_RC_VOL_UP 0x00400000 +#define BUTTON_RC_VOL_DOWN 0x00800000 +#define BUTTON_REMOTE (BUTTON_RC_PLAY|BUTTON_RC_VOL_UP|BUTTON_RC_VOL_DOWN\ + |BUTTON_RC_REW|BUTTON_RC_FF) +#define RC_POWEROFF_BUTTON BUTTON_RC_PLAY + +#endif /* _BUTTON_TARGET_H_ */ -- cgit v1.2.3