Rename targets to be consistent in all places. (FS #10819)

git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23881 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 227 insertions, 0 deletions

diff --git a/firmware/export/config/gigabeats.h b/firmware/export/config/gigabeats.h
new file mode 100644
index 0000000000..3f001af737
--- /dev/null
+++ b/firmware/export/config/gigabeats.h
@@ -0,0 +1,227 @@
+/*
+ * This config file is for toshiba Gigabeat S
+ */
+
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define TOSHIBA_GIGABEAT_S 1
+
+#define MODEL_NAME "Toshiba Gigabeat S"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 21
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* LCD dimensions */
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 320
+#define LCD_DEPTH  16   /* 65k colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+#define CONFIG_KEYPAD GIGABEAT_S_PAD
+
+/* Define keyboard features */
+#define KBD_CURSOR_KEYS /* allow non-line edit cursor movement */
+#define KBD_MODES       /* enable line edit */
+#define KBD_MORSE_INPUT /* enable morse code input */
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_MC13783
+
+/* Define if the device can wake from an RTC alarm */
+#define HAVE_RTC_ALARM
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have a SI4700 fm radio tuner */
+#define CONFIG_TUNER SI4700
+
+/* Define this if you have the WM8978 audio codec */
+#define HAVE_WM8978
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
+                       SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
+                       SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
+
+/* define the bitmask of recording sample rates */
+#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
+
+/* define default recording levels */
+#define DEFAULT_REC_LEFT_GAIN 0
+#define DEFAULT_REC_RIGHT_GAIN 0
+
+/* Define this if you have recording capability */
+#define HAVE_RECORDING
+
+/* Define this if your LCD can be put to sleep. */
+#define HAVE_LCD_SLEEP
+/* We don't use a setting but a fixed delay after the backlight has
+ * turned off */
+#define LCD_SLEEP_TIMEOUT (2*HZ)
+
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+#ifndef BOOTLOADER
+
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING          1
+#define MAX_BRIGHTNESS_SETTING          24
+#define DEFAULT_BRIGHTNESS_SETTING      12
+
+/* Implementation-defined fading type with bool settings */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET
+
+#define HAVE_HEADPHONE_DETECTION
+#endif /* BOOTLOADER */
+
+#ifndef SIMULATOR
+
+/* The LCD on a Gigabeat is 240x320 - it is portrait */
+#define HAVE_PORTRAIT_LCD
+
+#define CONFIG_CPU IMX31L
+
+/* Define this if you want to use imx31l's i2c interface */
+#define CONFIG_I2C I2C_IMX31L
+
+/* Define the bitmask of modules used */
+#define SPI_MODULE_MASK (USE_CSPI2_MODULE)
+#define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE)
+#define GPIO_EVENT_MASK (USE_GPIO1_EVENTS)
+
+/* Define this if target has an additional number of threads specific to it */
+#define TARGET_EXTRA_THREADS 2
+
+/* Type of mobile power - check this out */
+#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN     700 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX    1200 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC      25 /* capacity increment */
+#define BATTERY_TYPES_COUNT        1 /* only one type */
+
+/* TODO: have a proper status displayed in the bootloader and have it
+ * work! */
+/* Charing implemented in a target-specific algorithm */
+#define CONFIG_CHARGING CHARGING_TARGET
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x400000
+
+/* Define this to the CPU frequency */
+/* TODO */
+#define CPU_FREQ 264000000 /* Set by retailOS loader */
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+#define USBPOWER_BUTTON     BUTTON_MENU
+#define USBPOWER_BTN_IGNORE BUTTON_POWER
+
+/* define this if the unit has a battery switch or battery can be removed
+ * when running */
+#define HAVE_BATTERY_SWITCH
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the usb stack */
+#define USE_ROCKBOX_USB
+#define HAVE_USBSTACK
+/* usb stack and driver settings */
+#define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI
+#define USB_VENDOR_ID 0x0930
+#define USB_PRODUCT_ID 0x0010
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Define this to add support for ATA DMA */
+#define HAVE_ATA_DMA
+
+#define CONFIG_LCD LCD_GIGABEAT
+
+/* define this if the backlight can be set to a brightness */
+//#define HAVE_BACKLIGHT_SET_FADING
+#define __BACKLIGHT_INIT
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+//#define HAVE_SERIAL
+#define HAVE_VOLUME_IN_LIST
+
+/*Remove Comments from UART_INT to enable the UART interrupts,*/
+/*otherwise iterrupts will be disabled. For now we will test */
+/*UART state by polling the registers, and if necessary update this */
+/*method by using the interrupts instead*/
+//#define UART_INT
+
+/* Define this if you have adjustable CPU frequency */
+/* #define HAVE_ADJUSTABLE_CPU_FREQ */
+
+#define HAVE_PCM_DMA_ADDRESS
+
+#define BOOTFILE_EXT "gigabeat"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#endif