From 66fa5b578904f7df61293d6ce5c08966b5db13db Mon Sep 17 00:00:00 2001 From: Björn Stenberg Date: Mon, 7 Dec 2009 09:03:11 +0000 Subject: Rename targets to be consistent in all places. (FS #10819) git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23881 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config/gigabeats.h | 227 +++++++++++++++++++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 firmware/export/config/gigabeats.h (limited to 'firmware/export/config/gigabeats.h') diff --git a/firmware/export/config/gigabeats.h b/firmware/export/config/gigabeats.h new file mode 100644 index 0000000000..3f001af737 --- /dev/null +++ b/firmware/export/config/gigabeats.h @@ -0,0 +1,227 @@ +/* + * This config file is for toshiba Gigabeat S + */ + +#define TARGET_TREE /* this target is using the target tree system */ + +#define TOSHIBA_GIGABEAT_S 1 + +#define MODEL_NAME "Toshiba Gigabeat S" + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 21 + +/* define this if you use an ATA controller */ +#define CONFIG_STORAGE STORAGE_ATA + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +/* define this if you want album art for this target */ +#define HAVE_ALBUMART + +/* define this to enable bitmap scaling */ +#define HAVE_BMP_SCALING + +/* define this to enable JPEG decoding */ +#define HAVE_JPEG + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if the target has volume keys which can be used in the lists */ +#define HAVE_VOLUME_IN_LIST + +/* LCD dimensions */ +#define LCD_WIDTH 240 +#define LCD_HEIGHT 320 +#define LCD_DEPTH 16 /* 65k colours */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +#define CONFIG_KEYPAD GIGABEAT_S_PAD + +/* Define keyboard features */ +#define KBD_CURSOR_KEYS /* allow non-line edit cursor movement */ +#define KBD_MODES /* enable line edit */ +#define KBD_MORSE_INPUT /* enable morse code input */ + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_MC13783 + +/* Define if the device can wake from an RTC alarm */ +#define HAVE_RTC_ALARM + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +/* define this if you have a disk storage, i.e. something + that needs spinups and can cause skips when shaked */ +#define HAVE_DISK_STORAGE + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x100000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +/* Define this if you have a SI4700 fm radio tuner */ +#define CONFIG_TUNER SI4700 + +/* Define this if you have the WM8978 audio codec */ +#define HAVE_WM8978 + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +#define INPUT_SRC_CAPS SRC_CAP_FMRADIO + +/* define the bitmask of hardware sample rates */ +#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ + SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ + SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) + +/* define the bitmask of recording sample rates */ +#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */ + +/* define default recording levels */ +#define DEFAULT_REC_LEFT_GAIN 0 +#define DEFAULT_REC_RIGHT_GAIN 0 + +/* Define this if you have recording capability */ +#define HAVE_RECORDING + +/* Define this if your LCD can be put to sleep. */ +#define HAVE_LCD_SLEEP +/* We don't use a setting but a fixed delay after the backlight has + * turned off */ +#define LCD_SLEEP_TIMEOUT (2*HZ) + +/* Define this if your LCD can be enabled/disabled */ +#define HAVE_LCD_ENABLE + +#ifndef BOOTLOADER + +#define HAVE_BACKLIGHT_BRIGHTNESS + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 1 +#define MAX_BRIGHTNESS_SETTING 24 +#define DEFAULT_BRIGHTNESS_SETTING 12 + +/* Implementation-defined fading type with bool settings */ +#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET + +#define HAVE_HEADPHONE_DETECTION +#endif /* BOOTLOADER */ + +#ifndef SIMULATOR + +/* The LCD on a Gigabeat is 240x320 - it is portrait */ +#define HAVE_PORTRAIT_LCD + +#define CONFIG_CPU IMX31L + +/* Define this if you want to use imx31l's i2c interface */ +#define CONFIG_I2C I2C_IMX31L + +/* Define the bitmask of modules used */ +#define SPI_MODULE_MASK (USE_CSPI2_MODULE) +#define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE) +#define GPIO_EVENT_MASK (USE_GPIO1_EVENTS) + +/* Define this if target has an additional number of threads specific to it */ +#define TARGET_EXTRA_THREADS 2 + +/* Type of mobile power - check this out */ +#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 25 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* TODO: have a proper status displayed in the bootloader and have it + * work! */ +/* Charing implemented in a target-specific algorithm */ +#define CONFIG_CHARGING CHARGING_TARGET + +/* define this if the hardware can be powered off while charging */ +#define HAVE_POWEROFF_WHILE_CHARGING + +/* The size of the flash ROM */ +#define FLASH_SIZE 0x400000 + +/* Define this to the CPU frequency */ +/* TODO */ +#define CPU_FREQ 264000000 /* Set by retailOS loader */ + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER +#define USBPOWER_BUTTON BUTTON_MENU +#define USBPOWER_BTN_IGNORE BUTTON_POWER + +/* define this if the unit has a battery switch or battery can be removed + * when running */ +#define HAVE_BATTERY_SWITCH + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_ARC + +/* enable these for the usb stack */ +#define USE_ROCKBOX_USB +#define HAVE_USBSTACK +/* usb stack and driver settings */ +#define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI +#define USB_VENDOR_ID 0x0930 +#define USB_PRODUCT_ID 0x0010 + +/* Define this if you have ATA power-off control */ +#define HAVE_ATA_POWER_OFF + +/* Define this to add support for ATA DMA */ +#define HAVE_ATA_DMA + +#define CONFIG_LCD LCD_GIGABEAT + +/* define this if the backlight can be set to a brightness */ +//#define HAVE_BACKLIGHT_SET_FADING +#define __BACKLIGHT_INIT + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 0 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 8 + +//#define HAVE_SERIAL +#define HAVE_VOLUME_IN_LIST + +/*Remove Comments from UART_INT to enable the UART interrupts,*/ +/*otherwise iterrupts will be disabled. For now we will test */ +/*UART state by polling the registers, and if necessary update this */ +/*method by using the interrupts instead*/ +//#define UART_INT + +/* Define this if you have adjustable CPU frequency */ +/* #define HAVE_ADJUSTABLE_CPU_FREQ */ + +#define HAVE_PCM_DMA_ADDRESS + +#define BOOTFILE_EXT "gigabeat" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +#endif -- cgit v1.2.3