1 files changed, 346 insertions, 0 deletions

diff --git a/rbutil/rbutilqt/quazip/quazip.h b/rbutil/rbutilqt/quazip/quazip.h
new file mode 100644
index 0000000000..ced1ea0f1a
--- /dev/null
+++ b/rbutil/rbutilqt/quazip/quazip.h
@@ -0,0 +1,346 @@
+#ifndef QUA_ZIP_H
+#define QUA_ZIP_H
+
+/*
+-- A kind of "standard" GPL license statement --
+QuaZIP - a Qt/C++ wrapper for the ZIP/UNZIP package
+Copyright (C) 2005-2007 Sergey A. Tachenov
+
+This program is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2 of the License, or (at your
+option) any later version.
+
+This program is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+Public License for more details.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+-- A kind of "standard" GPL license statement ends here --
+
+See COPYING file for GPL.
+
+You are also permitted to use QuaZIP under the terms of LGPL (see
+COPYING.LGPL). You are free to choose either license, but please note
+that QuaZIP makes use of Qt, which is not licensed under LGPL. So if
+you are using Open Source edition of Qt, you therefore MUST use GPL for
+your code based on QuaZIP, since it would be also based on Qt in this
+case. If you are Qt commercial license owner, then you are free to use
+QuaZIP as long as you respect either GPL or LGPL for QuaZIP code.
+ **/
+
+#include <QString>
+#include <QTextCodec>
+
+#include "zip.h"
+#include "unzip.h"
+
+#include "quazipfileinfo.h"
+
+// just in case it will be defined in the later versions of the ZIP/UNZIP
+#ifndef UNZ_OPENERROR
+// define additional error code
+#define UNZ_OPENERROR -1000
+#endif
+
+/// ZIP archive.
+/** \class QuaZip quazip.h <quazip/quazip.h>
+ * This class implements basic interface to the ZIP archive. It can be
+ * used to read table contents of the ZIP archive and retreiving
+ * information about the files inside it.
+ *
+ * You can also use this class to open files inside archive by passing
+ * pointer to the instance of this class to the constructor of the
+ * QuaZipFile class. But see QuaZipFile::QuaZipFile(QuaZip*, QObject*)
+ * for the possible pitfalls.
+ *
+ * This class is indended to provide interface to the ZIP subpackage of
+ * the ZIP/UNZIP package as well as to the UNZIP subpackage. But
+ * currently it supports only UNZIP.
+ *
+ * The use of this class is simple - just create instance using
+ * constructor, then set ZIP archive file name using setFile() function
+ * (if you did not passed the name to the constructor), then open() and
+ * then use different functions to work with it! Well, if you are
+ * paranoid, you may also wish to call close before destructing the
+ * instance, to check for errors on close.
+ *
+ * You may also use getUnzFile() and getZipFile() functions to get the
+ * ZIP archive handle and use it with ZIP/UNZIP package API directly.
+ *
+ * This class supports localized file names inside ZIP archive, but you
+ * have to set up proper codec with setCodec() function. By default,
+ * locale codec will be used, which is probably ok for UNIX systems, but
+ * will almost certainly fail with ZIP archives created in Windows. This
+ * is because Windows ZIP programs have strange habit of using DOS
+ * encoding for file names in ZIP archives. For example, ZIP archive
+ * with cyrillic names created in Windows will have file names in \c
+ * IBM866 encoding instead of \c WINDOWS-1251. I think that calling one
+ * function is not much trouble, but for true platform independency it
+ * would be nice to have some mechanism for file name encoding auto
+ * detection using locale information. Does anyone know a good way to do
+ * it?
+ **/
+class QuaZip {
+  public:
+    /// Useful constants.
+    enum Constants {
+      MAX_FILE_NAME_LENGTH=256 /**< Maximum file name length. Taken from
+                                 \c UNZ_MAXFILENAMEINZIP constant in
+                                 unzip.c. */
+    };
+    /// Open mode of the ZIP file.
+    enum Mode {
+      mdNotOpen, ///< ZIP file is not open. This is the initial mode.
+      mdUnzip, ///< ZIP file is open for reading files inside it.
+      mdCreate, ///< ZIP file was created with open() call.
+      mdAppend, /**< ZIP file was opened in append mode. This refers to
+                  * \c APPEND_STATUS_CREATEAFTER mode in ZIP/UNZIP package
+                  * and means that zip is appended to some existing file
+                  * what is useful when that file contains
+                  * self-extractor code. This is obviously \em not what
+                  * you whant to use to add files to the existing ZIP
+                  * archive.
+                  **/
+      mdAdd ///< ZIP file was opened for adding files in the archive.
+    };
+    /// Case sensitivity for the file names.
+    /** This is what you specify when accessing files in the archive.
+     * Works perfectly fine with any characters thanks to Qt's great
+     * unicode support. This is different from ZIP/UNZIP API, where
+     * only US-ASCII characters was supported.
+     **/
+    enum CaseSensitivity {
+      csDefault=0, ///< Default for platform. Case sensitive for UNIX, not for Windows.
+      csSensitive=1, ///< Case sensitive.
+      csInsensitive=2 ///< Case insensitive.
+    };
+  private:
+    QTextCodec *fileNameCodec, *commentCodec;
+    QString zipName;
+    QString comment;
+    Mode mode;
+    union {
+      unzFile unzFile_f;
+      zipFile zipFile_f;
+    };
+    bool hasCurrentFile_f;
+    int zipError;
+    // not (and will not be) implemented
+    QuaZip(const QuaZip& that);
+    // not (and will not be) implemented
+    QuaZip& operator=(const QuaZip& that);
+  public:
+    /// Constructs QuaZip object.
+    /** Call setName() before opening constructed object. */
+    QuaZip();
+    /// Constructs QuaZip object associated with ZIP file \a zipName.
+    QuaZip(const QString& zipName);
+    /// Destroys QuaZip object.
+    /** Calls close() if necessary. */
+    ~QuaZip();
+    /// Opens ZIP file.
+    /** Argument \a ioApi specifies IO function set for ZIP/UNZIP
+     * package to use. See unzip.h, zip.h and ioapi.h for details. By
+     * passing NULL (the default) you just tell package to use the
+     * default API which works just fine on UNIX platforms. I have tried
+     * it on win32-g++ platform too and it seems it works fine there
+     * too, so I see no reason to use win32 IO API included in original
+     * ZIP/UNZIP package.
+     *
+     * ZIP archive file name will be converted to 8-bit encoding using
+     * Qt's QFile::encodeName() function before passing it to the
+     * ZIP/UNZIP package API.
+     *
+     * Returns \c true if successful, \c false otherwise.
+     *
+     * Argument \a mode specifies open mode of the ZIP archive. See Mode
+     * for details. Note that there is zipOpen2() function in the
+     * ZIP/UNZIP API which accepts \a globalcomment argument, but it
+     * does not use it anywhere, so this open() function does not have this
+     * argument. See setComment() if you need to set global comment.
+     *
+     * \note ZIP/UNZIP API open calls do not return error code - they
+     * just return \c NULL indicating an error. But to make things
+     * easier, quazip.h header defines additional error code \c
+     * UNZ_ERROROPEN and getZipError() will return it if the open call
+     * of the ZIP/UNZIP API returns \c NULL.
+     **/
+    bool open(Mode mode, zlib_filefunc_def *ioApi =NULL);
+    /// Closes ZIP file.
+    /** Call getZipError() to determine if the close was successful. */
+    void close();
+    /// Sets the codec used to encode/decode file names inside archive.
+    /** This is necessary to access files in the ZIP archive created
+     * under Windows with non-latin characters in file names. For
+     * example, file names with cyrillic letters will be in \c IBM866
+     * encoding.
+     **/
+    void setFileNameCodec(QTextCodec *fileNameCodec)
+    {this->fileNameCodec=fileNameCodec;}
+    /// Sets the codec used to encode/decode file names inside archive.
+    /** \overload
+     * Equivalent to calling setFileNameCodec(QTextCodec::codecForName(codecName));
+     **/
+    void setFileNameCodec(const char *fileNameCodecName)
+    {fileNameCodec=QTextCodec::codecForName(fileNameCodecName);}
+    /// Returns the codec used to encode/decode comments inside archive.
+    QTextCodec* getFileNameCodec()const {return fileNameCodec;}
+    /// Sets the codec used to encode/decode comments inside archive.
+    /** This codec defaults to locale codec, which is probably ok.
+     **/
+    void setCommentCodec(QTextCodec *commentCodec)
+    {this->commentCodec=commentCodec;}
+    /// Sets the codec used to encode/decode comments inside archive.
+    /** \overload
+     * Equivalent to calling setCommentCodec(QTextCodec::codecForName(codecName));
+     **/
+    void setCommentCodec(const char *commentCodecName)
+    {commentCodec=QTextCodec::codecForName(commentCodecName);}
+    /// Returns the codec used to encode/decode comments inside archive.
+    QTextCodec* getCommentCodec()const {return commentCodec;}
+    /// Returns the name of the ZIP file.
+    /** Returns null string if no ZIP file name has been set.
+     * \sa setZipName()
+     **/
+    QString getZipName()const {return zipName;}
+    /// Sets the name of the ZIP file.
+    /** Does nothing if the ZIP file is open.
+     *
+     * Does not reset error code returned by getZipError().
+     **/
+    void setZipName(const QString& zipName);
+    /// Returns the mode in which ZIP file was opened.
+    Mode getMode()const {return mode;}
+    /// Returns \c true if ZIP file is open, \c false otherwise.
+    bool isOpen()const {return mode!=mdNotOpen;}
+    /// Returns the error code of the last operation.
+    /** Returns \c UNZ_OK if the last operation was successful.
+     *
+     * Error code resets to \c UNZ_OK every time you call any function
+     * that accesses something inside ZIP archive, even if it is \c
+     * const (like getEntriesCount()). open() and close() calls reset
+     * error code too. See documentation for the specific functions for
+     * details on error detection.
+     **/
+    int getZipError()const {return zipError;}
+    /// Returns number of the entries in the ZIP central directory.
+    /** Returns negative error code in the case of error. The same error
+     * code will be returned by subsequent getZipError() call.
+     **/
+    int getEntriesCount()const;
+    /// Returns global comment in the ZIP file.
+    QString getComment()const;
+    /// Sets global comment in the ZIP file.
+    /** Comment will be written to the archive on close operation.
+     *
+     * \sa open()
+     **/
+    void setComment(const QString& comment) {this->comment=comment;}
+    /// Sets the current file to the first file in the archive.
+    /** Returns \c true on success, \c false otherwise. Call
+     * getZipError() to get the error code.
+     **/
+    bool goToFirstFile();
+    /// Sets the current file to the next file in the archive.
+    /** Returns \c true on success, \c false otherwise. Call
+     * getZipError() to determine if there was an error.
+     *
+     * Should be used only in QuaZip::mdUnzip mode.
+     *
+     * \note If the end of file was reached, getZipError() will return
+     * \c UNZ_OK instead of \c UNZ_END_OF_LIST_OF_FILE. This is to make
+     * things like this easier:
+     * \code
+     * for(bool more=zip.goToFirstFile(); more; more=zip.goToNextFile()) {
+     *   // do something
+     * }
+     * if(zip.getZipError()==UNZ_OK) {
+     *   // ok, there was no error
+     * }
+     * \endcode
+     **/
+    bool goToNextFile();
+    /// Sets current file by its name.
+    /** Returns \c true if successful, \c false otherwise. Argument \a
+     * cs specifies case sensitivity of the file name. Call
+     * getZipError() in the case of a failure to get error code.
+     *
+     * This is not a wrapper to unzLocateFile() function. That is
+     * because I had to implement locale-specific case-insensitive
+     * comparison.
+     *
+     * Here are the differences from the original implementation:
+     *
+     * - If the file was not found, error code is \c UNZ_OK, not \c
+     *   UNZ_END_OF_LIST_OF_FILE (see also goToNextFile()).
+     * - If this function fails, it unsets the current file rather than
+     *   resetting it back to what it was before the call.
+     *
+     * If \a fileName is null string then this function unsets the
+     * current file and return \c true. Note that you should close the
+     * file first if it is open! See
+     * QuaZipFile::QuaZipFile(QuaZip*,QObject*) for the details.
+     *
+     * Should be used only in QuaZip::mdUnzip mode.
+     *
+     * \sa setFileNameCodec(), CaseSensitivity
+     **/
+    bool setCurrentFile(const QString& fileName, CaseSensitivity cs =csDefault);
+    /// Returns \c true if the current file has been set.
+    bool hasCurrentFile()const {return hasCurrentFile_f;}
+    /// Retrieves information about the current file.
+    /** Fills the structure pointed by \a info. Returns \c true on
+     * success, \c false otherwise. In the latter case structure pointed
+     * by \a info remains untouched. If there was an error,
+     * getZipError() returns error code.
+     *
+     * Should be used only in QuaZip::mdUnzip mode.
+     *
+     * Does nothing and returns \c false in any of the following cases.
+     * - ZIP is not open;
+     * - ZIP does not have current file;
+     * - \a info is \c NULL;
+     *
+     * In all these cases getZipError() returns \c UNZ_OK since there
+     * is no ZIP/UNZIP API call.
+     **/
+    bool getCurrentFileInfo(QuaZipFileInfo* info)const;
+    /// Returns the current file name.
+    /** Equivalent to calling getCurrentFileInfo() and then getting \c
+     * name field of the QuaZipFileInfo structure, but faster and more
+     * convenient.
+     *
+     * Should be used only in QuaZip::mdUnzip mode.
+     **/
+    QString getCurrentFileName()const;
+    /// Returns \c unzFile handle.
+    /** You can use this handle to directly call UNZIP part of the
+     * ZIP/UNZIP package functions (see unzip.h).
+     *
+     * \warning When using the handle returned by this function, please
+     * keep in mind that QuaZip class is unable to detect any changes
+     * you make in the ZIP file state (e. g. changing current file, or
+     * closing the handle). So please do not do anything with this
+     * handle that is possible to do with the functions of this class.
+     * Or at least return the handle in the original state before
+     * calling some another function of this class (including implicit
+     * destructor calls and calls from the QuaZipFile objects that refer
+     * to this QuaZip instance!). So if you have changed the current
+     * file in the ZIP archive - then change it back or you may
+     * experience some strange behavior or even crashes.
+     **/
+    unzFile getUnzFile() {return unzFile_f;}
+    /// Returns \c zipFile handle.
+    /** You can use this handle to directly call ZIP part of the
+     * ZIP/UNZIP package functions (see zip.h). Warnings about the
+     * getUnzFile() function also apply to this function.
+     **/
+    zipFile getZipFile() {return zipFile_f;}
+};
+
+#endif