1 files changed, 16 insertions, 7 deletions

diff --git a/manual/getting_started/installation.tex b/manual/getting_started/installation.tex
index e5bf71365c..6a22bbdb4b 100644
--- a/manual/getting_started/installation.tex
+++ b/manual/getting_started/installation.tex
@@ -11,7 +11,7 @@ before beginning there are a few things it is important to know.
 follow the instructions at 
 \url{http://www.rockbox.org/twiki/bin/view/Main/SansaE200RInstallation}.}}
 
-\opt{ipodnano,ipodnano2g,ipodvideo,e200,c200,e200v2}{
+\opt{ipodnano,ipodnano2g,ipodvideo,e200,c200,e200v2,clip}{
 \begin{description}  
 \item[Supported hardware versions.] 
     \opt{ipodnano,ipodnano2g}{
@@ -42,7 +42,15 @@ follow the instructions at
     Settings $\rightarrow$ Info. The v1 firmware is named 01.xx.xx, while the
     v2 firmware begins with 03. Make sure that you are following the
     instructions from the correct manual.
-}  
+}
+  \opt{clip}{
+    The \playertype{} is available in multiple versions, not all of which
+    run Rockbox.  Rockbox doesn't run on the newer v2 models. They can be
+    identified by checking the Sandisk firmware version number under 
+    Settings $\rightarrow$ System Info. The v1 firmware is named 01.xx.xx,
+    while the v2 firmware begins with 02.  In addition, Rockbox does not
+    run on the Clip+.
+}
 \end{description}
 }
 
@@ -98,12 +106,12 @@ follow the instructions at
     is intended to be used for USB OTG connections only (digital cameras, memory
     sticks, etc.).
   }    
-  \opt{sansa,e200v2}{
+  \opt{sansa,e200v2,clip}{
     \note{The following steps require you to change the setting in
     \setting{Settings $\rightarrow$ USB Mode} to \setting{MSC} from within the
     original firmware.}
 
-    \nopt{e200v2}{\warn{Never extract files to your \dap{} while it is in recovery mode.}}
+    \nopt{e200v2,clip}{\warn{Never extract files to your \dap{} while it is in recovery mode.}}
   }
   \opt{h10,h10_5gb}{
     The installation requires you to use UMS mode and so
@@ -238,8 +246,9 @@ housekeeping tool \caps{Rockbox Utility}. It allows you to:
 Prebuilt binaries for Windows, Linux and Mac OS X are
 available at the \wikilink{RockboxUtility} wiki page.\\
 
-\opt{gigabeats}{\note{Rockbox Utility does not currently support the Gigabeat S
-and you will therefore need to follow the manual install instructions below.\\}}
+\opt{gigabeats,clip}{\note{Rockbox Utility does not currently support the 
+\playertype{} and you will therefore need to follow the manual install
+instructions below.\\}}
 
 When first starting \caps{Rockbox Utility} run ``Autodetect'',
 found in the configuration dialog (File $\rightarrow$ Configure). Autodetection
@@ -428,7 +437,7 @@ structure that Rockbox needs.\\}
   \end{itemize}
 }
 
-\opt{h10,h10_5gb,ipod,mrobe100,sansa,archos}{
+\opt{h10,h10_5gb,ipod,mrobe100,sansa,archos,sansaAMS}{
   Safely eject / unmount the USB drive, unplug the cable and restart.
 }