summaryrefslogtreecommitdiff
path: root/firmware
diff options
context:
space:
mode:
Diffstat (limited to 'firmware')
-rw-r--r--firmware/SOURCES7
-rw-r--r--firmware/drivers/tuner/tea5760uk.c135
-rw-r--r--firmware/export/config-meizu-m6sl.h170
-rw-r--r--firmware/export/config.h15
-rw-r--r--firmware/export/s5l8700.h536
-rw-r--r--firmware/target/arm/s5l8700/meizu-m6sl/adc-target.h33
-rw-r--r--firmware/target/arm/s5l8700/meizu-m6sl/button-target.h52
7 files changed, 946 insertions, 2 deletions
diff --git a/firmware/SOURCES b/firmware/SOURCES
index 8fe5661759..4937e6e6c6 100644
--- a/firmware/SOURCES
+++ b/firmware/SOURCES
@@ -924,3 +924,10 @@ target/arm/tcc780x/cowond2/pcm-cowond2.c
924#endif /* BOOTLOADER */ 924#endif /* BOOTLOADER */
925#endif /* SIMULATOR */ 925#endif /* SIMULATOR */
926#endif /* COWON_D2 */ 926#endif /* COWON_D2 */
927
928#ifdef MEIZU_M6SL
929#ifndef SIMULATOR
930#ifndef BOOTLOADER
931#endif /* BOOTLOADER */
932#endif /* SIMULATOR */
933#endif /* MEIZU_M6SL */
diff --git a/firmware/drivers/tuner/tea5760uk.c b/firmware/drivers/tuner/tea5760uk.c
new file mode 100644
index 0000000000..8ac6cb2dbc
--- /dev/null
+++ b/firmware/drivers/tuner/tea5760uk.c
@@ -0,0 +1,135 @@
1/***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
9 * Tuner "middleware" for Philips TEA5760 chip
10 *
11 * Copyright (C) 2004 Jörg Hohensohn
12 *
13 * All files in this archive are subject to the GNU General Public License.
14 * See the file COPYING in the source tree root for full license agreement.
15 *
16 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
17 * KIND, either express or implied.
18 *
19 ****************************************************************************/
20#include "config.h"
21#include <stdbool.h>
22#include <string.h>
23#include <stdlib.h>
24#include "kernel.h"
25#include "tuner.h" /* tuner abstraction interface */
26#include "fmradio.h"
27#include "fmradio_i2c.h" /* physical interface driver */
28
29#define I2C_ADR 0xC0
30static unsigned char write_bytes[7] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
31
32static void tea5760uk_set_clear(int byte, unsigned char bits, int set)
33{
34 write_bytes[byte] &= ~bits;
35 if (set)
36 write_bytes[byte] |= bits;
37}
38
39/* tuner abstraction layer: set something to the tuner */
40int tea5760uk_set(int setting, int value)
41{
42 switch(setting)
43 {
44 case RADIO_SLEEP:
45 /* init values */
46 write_bytes[0] |= (1<<7); /* mute */
47#if CONFIG_TUNER_XTAL == 32768
48 /* 32.768kHz, soft mute, stereo noise cancelling */
49 write_bytes[3] |= (1<<4) | (1<<3) | (1<<1);
50#else
51 /* soft mute, stereo noise cancelling */
52 write_bytes[3] |= (1<<3) | (1<<1);
53#endif
54 /* sleep / standby mode */
55 tea5760uk_set_clear(3, (1<<6), value);
56 break;
57
58 case RADIO_FREQUENCY:
59 {
60 int n;
61#if CONFIG_TUNER_XTAL == 32768
62 n = (4 * (value - 225000) + 16384) / 32768;
63#else
64 n = (4 * (value - 225000)) / 50000;
65#endif
66 write_bytes[6] = (write_bytes[6] & 0xC0) | (n >> 8);
67 write_bytes[7] = n;
68 }
69 break;
70
71 case RADIO_SCAN_FREQUENCY:
72 tea5760uk_set(RADIO_FREQUENCY, value);
73 sleep(HZ/30);
74 return tea5760uk_get(RADIO_TUNED);
75
76 case RADIO_MUTE:
77 tea5760uk_set_clear(3, (1<<2), value);
78 break;
79
80 case RADIO_REGION:
81 {
82 const struct tea5760uk_region_data *rd =
83 &tea5760uk_region_data[value];
84
85 tea5760uk_set_clear(4, (1<<1), rd->deemphasis);
86 tea5760uk_set_clear(3, (1<<5), rd->band);
87 break;
88 }
89 case RADIO_FORCE_MONO:
90 tea5760uk_set_clear(4, (1<<3), value);
91 break;
92 default:
93 return -1;
94 }
95
96 fmradio_i2c_write(I2C_ADR, write_bytes, sizeof(write_bytes));
97 return 1;
98}
99
100/* tuner abstraction layer: read something from the tuner */
101int tea5760uk_get(int setting)
102{
103 unsigned char read_bytes[16];
104 int val = -1; /* default for unsupported query */
105
106 fmradio_i2c_read(I2C_ADR, read_bytes, sizeof(read_bytes));
107
108 switch(setting)
109 {
110 case RADIO_PRESENT:
111 val = 1; /* true */
112 break;
113
114 case RADIO_TUNED:
115 val = 0;
116 if (read_bytes[0] & (1<<4)) /* IF count correct */
117 {
118 val = read_bytes[8] >> 1; /* IF counter */
119 val = (abs(val - 0x36) < 2); /* close match */
120 }
121 break;
122
123 case RADIO_STEREO:
124 val = read_bytes[9] >> 2;
125 break;
126 }
127
128 return val;
129}
130
131void tea5760uk_dbg_info(struct tea5760uk_dbg_info *info)
132{
133 fmradio_i2c_read(I2C_ADR, info->read_regs, 5);
134 memcpy(info->write_regs, write_bytes, 5);
135}
diff --git a/firmware/export/config-meizu-m6sl.h b/firmware/export/config-meizu-m6sl.h
new file mode 100644
index 0000000000..1c3b5f8a23
--- /dev/null
+++ b/firmware/export/config-meizu-m6sl.h
@@ -0,0 +1,170 @@
1/*
2 * This config file is for iAudio X5
3 */
4#define TARGET_TREE /* this target is using the target tree system */
5
6/* For Rolo and boot loader */
7#define MODEL_NUMBER 1
8
9/* define this if you have recording possibility */
10//#define HAVE_RECORDING
11
12/* Define bitmask of input sources - recordable bitmask can be defined
13 explicitly if different */
14#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
15
16/* define the bitmask of hardware sample rates */
17#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
18
19/* define the bitmask of recording sample rates */
20#define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
21
22/* define this if you have a bitmap LCD display */
23#define HAVE_LCD_BITMAP
24
25/* define this if you can flip your LCD */
26//#define HAVE_LCD_FLIP
27
28/* define this if you have a colour LCD */
29#define HAVE_LCD_COLOR
30
31/* define this if you want album art for this target */
32#define HAVE_ALBUMART
33
34/* define this if you can invert the colours on your LCD */
35//#define HAVE_LCD_INVERT
36
37/* define this if you have access to the quickscreen */
38#define HAVE_QUICKSCREEN
39
40/* define this if you have access to the pitchscreen */
41#define HAVE_PITCHSCREEN
42
43/* define this if you would like tagcache to build on this target */
44#define HAVE_TAGCACHE
45
46/* define this if you have a flash memory storage */
47#define HAVE_FLASH_STORAGE
48
49/* LCD dimensions */
50#define LCD_WIDTH 320
51#define LCD_HEIGHT 240
52#define LCD_DEPTH 16 /* pseudo 262.144 colors */
53#define LCD_PIXELFORMAT RGB565 /* rgb565 */
54
55/* Define this if your LCD can be enabled/disabled */
56//#define HAVE_LCD_ENABLE
57
58/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
59 should be defined as well. */
60//#define HAVE_LCD_SLEEP
61
62#define CONFIG_KEYPAD MEIZU_M6SL_PAD
63
64//#define AB_REPEAT_ENABLE 1
65//#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
66
67/* Define this if you do software codec */
68#define CONFIG_CODEC SWCODEC
69
70/* define this if you have a real-time clock */
71#define CONFIG_RTC RTC_S5L8700
72//#define CONFIG_RTC RTC_S35390A
73
74#define CONFIG_LCD LCD_S6D0129
75
76/* Define this for LCD backlight available */
77#define HAVE_BACKLIGHT
78#define HAVE_BACKLIGHT_BRIGHTNESS
79
80/* Define this if you have a software controlled poweroff */
81#define HAVE_SW_POWEROFF
82
83/* The number of bytes reserved for loadable codecs */
84#define CODEC_SIZE 0x80000
85
86/* The number of bytes reserved for loadable plugins */
87#define PLUGIN_BUFFER_SIZE 0x80000
88
89/* FM Tuner */
90#define CONFIG_TUNER TEA5760
91#define CONFIG_TUNER_XTAL 32768
92
93//#define HAVE_TLV320
94
95/* TLV320 has no tone controls, so we use the software ones */
96#define HAVE_SW_TONE_CONTROLS
97
98#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
99#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
100#define BATTERY_CAPACITY_MAX 2250 /* max. capacity selectable */
101#define BATTERY_CAPACITY_INC 50 /* capacity increment */
102#define BATTERY_TYPES_COUNT 1 /* only one type */
103
104/* Hardware controlled charging? FIXME */
105#define CONFIG_CHARGING CHARGING_SIMPLE
106
107#ifndef SIMULATOR
108
109/* Define this if your LCD can set contrast */
110//#define HAVE_LCD_CONTRAST
111
112/* Define this if you have a Motorola SCF5250 */
113#define CONFIG_CPU S5L8700
114
115/* Define this if you want to use coldfire's i2c interface */
116#define CONFIG_I2C I2C_S5L8700
117
118/* define this if the hardware can be powered off while charging */
119#define HAVE_POWEROFF_WHILE_CHARGING
120
121/* The size of the flash ROM */
122#define FLASH_SIZE 0x400000
123
124/* Define this to the CPU frequency */
125#define CPU_FREQ 11289600
126
127/* Define this if you have ATA power-off control */
128//#define HAVE_ATA_POWER_OFF
129
130/* Virtual LED (icon) */
131#define CONFIG_LED LED_VIRTUAL
132
133/* Offset ( in the firmware file's header ) to the file CRC */
134#define FIRMWARE_OFFSET_FILE_CRC 0
135
136/* Offset ( in the firmware file's header ) to the real data */
137#define FIRMWARE_OFFSET_FILE_DATA 8
138
139/* USB On-the-go */
140//#define CONFIG_USBOTG USBOTG_M5636
141
142/* Define this if you have adjustable CPU frequency */
143#define HAVE_ADJUSTABLE_CPU_FREQ
144
145#define BOOTFILE_EXT "meizu"
146#define BOOTFILE "rockbox." BOOTFILE_EXT
147#define BOOTDIR "/.rockbox"
148
149#define BOOTLOADER_ENTRYPOINT 0x001F0000
150#define FLASH_ENTRYPOINT 0x00001000
151#define FLASH_MAGIC 0xfbfbfbf1
152
153#endif /* SIMULATOR */
154
155/* Define this for FM radio input available */
156#define HAVE_FMRADIO_IN
157
158/** Port-specific settings **/
159
160/* Main LCD contrast range and defaults */
161#define MIN_CONTRAST_SETTING 1
162#define MAX_CONTRAST_SETTING 30
163#define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */
164
165/* Main LCD backlight brightness range and defaults */
166/* PCF50506 can output 0%-100% duty cycle but D305A expects %15-100%. */
167#define MIN_BRIGHTNESS_SETTING 1 /* 15/16 (93.75%) */
168#define MAX_BRIGHTNESS_SETTING 13 /* 3/16 (18.75%) */
169#define DEFAULT_BRIGHTNESS_SETTING 8 /* 8/16 (50.00%) = x5 boot default */
170
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 1a288dd590..4746506c99 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -31,6 +31,8 @@
31#define TEA5767 0x02 /* Philips */ 31#define TEA5767 0x02 /* Philips */
32#define LV24020LP 0x04 /* Sanyo */ 32#define LV24020LP 0x04 /* Sanyo */
33#define SI4700 0x08 /* Silicon Labs */ 33#define SI4700 0x08 /* Silicon Labs */
34#define TEA5760 0x10 /* Philips */
35#define LV240000 0x20 /* Sanyo */
34 36
35/* CONFIG_CODEC */ 37/* CONFIG_CODEC */
36#define MAS3587F 3587 38#define MAS3587F 3587
@@ -54,6 +56,7 @@
54#define TCC771L 771 56#define TCC771L 771
55#define TCC773L 773 57#define TCC773L 773
56#define TCC7801 7801 58#define TCC7801 7801
59#define S5L8700 8700
57 60
58/* CONFIG_KEYPAD */ 61/* CONFIG_KEYPAD */
59#define PLAYER_PAD 1 62#define PLAYER_PAD 1
@@ -79,6 +82,7 @@
79#define IAUDIO67_PAD 21 82#define IAUDIO67_PAD 21
80#define COWOND2_PAD 22 83#define COWOND2_PAD 22
81#define IAUDIO_M3_PAD 23 84#define IAUDIO_M3_PAD 23
85#define MEIZU_M6SL_PAD 24
82 86
83/* CONFIG_REMOTE_KEYPAD */ 87/* CONFIG_REMOTE_KEYPAD */
84#define H100_REMOTE 1 88#define H100_REMOTE 1
@@ -117,6 +121,7 @@
117#define LCD_CREATIVEZVM 22 /* as used by Creative Zen Vision:M */ 121#define LCD_CREATIVEZVM 22 /* as used by Creative Zen Vision:M */
118#define LCD_TL0350A 23 /* as used by the iAudio M3 remote, treated as main LCD */ 122#define LCD_TL0350A 23 /* as used by the iAudio M3 remote, treated as main LCD */
119#define LCD_COWOND2 24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */ 123#define LCD_COWOND2 24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */
124#define LCD_S6D0129 25 /* as used by the Meizu M6SP and M6SL - S6D0129 */
120 125
121/* LCD_PIXELFORMAT */ 126/* LCD_PIXELFORMAT */
122#define HORIZONTAL_PACKING 1 127#define HORIZONTAL_PACKING 1
@@ -143,6 +148,7 @@
143#define I2C_IMX31L 9 148#define I2C_IMX31L 9
144#define I2C_TCC77X 10 149#define I2C_TCC77X 10
145#define I2C_TCC780X 11 150#define I2C_TCC780X 11
151#define I2C_S5L8700 12
146 152
147/* CONFIG_LED */ 153/* CONFIG_LED */
148#define LED_REAL 1 /* SW controlled LED (Archos recorders, player) */ 154#define LED_REAL 1 /* SW controlled LED (Archos recorders, player) */
@@ -165,6 +171,8 @@
165#define RTC_TCC77X 10 171#define RTC_TCC77X 10
166#define RTC_TCC780X 11 172#define RTC_TCC780X 11
167#define RTC_MR100 12 173#define RTC_MR100 12
174#define RTC_S5L8700 13
175#define RTC_S35390A 14
168 176
169/* USB On-the-go */ 177/* USB On-the-go */
170#define USBOTG_ISP1362 1362 /* iriver H300 */ 178#define USBOTG_ISP1362 1362 /* iriver H300 */
@@ -246,6 +254,8 @@
246#include "config-cowond2.h" 254#include "config-cowond2.h"
247#elif defined(CREATIVE_ZVM) 255#elif defined(CREATIVE_ZVM)
248#include "config-creativezvm.h" 256#include "config-creativezvm.h"
257#elif defined(MEIZU_M6SL)
258#include "config-meizu-m6sl.h"
249#else 259#else
250/* no known platform */ 260/* no known platform */
251#endif 261#endif
@@ -382,7 +392,7 @@
382#endif 392#endif
383 393
384#if defined(CPU_PP) || (CONFIG_CPU == PNX0101) || (CONFIG_CPU == S3C2440) \ 394#if defined(CPU_PP) || (CONFIG_CPU == PNX0101) || (CONFIG_CPU == S3C2440) \
385 || (CONFIG_CPU == DSC25) || (CONFIG_CPU == DM320) 395 || (CONFIG_CPU == DSC25) || (CONFIG_CPU == DM320) || (CONFIG_CPU == S5L8700)
386#define CPU_ARM 396#define CPU_ARM
387#define ARM_ARCH 4 /* ARMv4 */ 397#define ARM_ARCH 4 /* ARMv4 */
388#endif 398#endif
@@ -411,7 +421,8 @@
411 defined(CPU_PP) || /* PortalPlayer: core, plugins, codecs */ \ 421 defined(CPU_PP) || /* PortalPlayer: core, plugins, codecs */ \
412 defined(CPU_TCC77X) || /* Telechips: core, plugins, codecs */ \ 422 defined(CPU_TCC77X) || /* Telechips: core, plugins, codecs */ \
413 defined(CPU_TCC780X) || /* Telechips: core, plugins, codecs */ \ 423 defined(CPU_TCC780X) || /* Telechips: core, plugins, codecs */ \
414 (CONFIG_CPU == PNX0101)) 424 (CONFIG_CPU == PNX0101) || \
425 (CONFIG_CPU == S5L8700))
415#define ICODE_ATTR __attribute__ ((section(".icode"))) 426#define ICODE_ATTR __attribute__ ((section(".icode")))
416#define ICONST_ATTR __attribute__ ((section(".irodata"))) 427#define ICONST_ATTR __attribute__ ((section(".irodata")))
417#define IDATA_ATTR __attribute__ ((section(".idata"))) 428#define IDATA_ATTR __attribute__ ((section(".idata")))
diff --git a/firmware/export/s5l8700.h b/firmware/export/s5l8700.h
new file mode 100644
index 0000000000..d0956c4f26
--- /dev/null
+++ b/firmware/export/s5l8700.h
@@ -0,0 +1,536 @@
1/***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id: S5L8700X.h 2008-03-24 A4 $
9 *
10 * Copyright (C) 2008 by Bart van Adrichem
11 *
12 * All files in this archive are subject to the GNU General Public License.
13 * See the file COPYING in the source tree root for full license agreement.
14 *
15 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
16 * KIND, either express or implied.
17 *
18 ****************************************************************************/
19
20/* Copied from imx31l.h */
21#define REG8_PTR_T volatile unsigned char *
22#define REG16_PTR_T volatile unsigned short *
23#define REG32_PTR_T volatile unsigned long *
24
25/* Base Adresses chapter in datasheet
26*/
27#define ARM_BASE_ADDR 0x38000000
28#define MIU_BASE_ADDR 0x38200000 //07
29#define IODMA_BASE_ADDR 0x38400000 //08
30#define USB_H11_BASE_ADDR 0x38600000 //22
31#define USB_F20_BASE_ADDR 0x38800000 //21
32#define USB_H20_BASE_ADDR 0x38A00000
33#define ATA_BASE_ADDR 0x38E00000 //28
34#define ADM_BASE_ADDR 0x39000000 //04
35#define LCD_CTRL_BASE_ADDR 0x39200000 //27
36#define ICU_BASE_ADDR 0x39C00000 //06
37#define EEC_BASE_ADDR 0x39E00000 //16
38#define APB_BRIDGE_BASE_ADDR 0x3C000000
39#define LCD_IF_BASE_ADDR 0x3C100000 //26
40#define FMC_BASE_ADDR 0x3C200000 //12
41#define MMC_SD_BASE_ADDR 0x3C300000 //13
42#define USB_PHY_BASE_ADDR 0x3C400000 //23
43#define CLCK_GEN_BASE_ADDR 0x3C500000 //05
44#define MS_BASE_ADDR 0x3C600000 //14
45#define TIMER_BASE_ADDR 0x3C700000 //11
46#define WDT_BASE_ADDR 0x3C800000 //09
47#define IIC_BASE_ADDR 0x3C900000 //18
48#define IIS_BASE_ADDR 0x3CA00000 //17
49#define SPDIF_OUT_BASE_ADDR 0x3CB00000 //15
50#define UART0_BASE_ADDR 0x3CC00000 //25
51#define UART1_BASE_ADDR 0x3CC08000 //25
52#define SPI_BASE_ADDR 0x3CD00000 //19
53#define ADC_BASE_ADDR 0x3CE00000 //20
54#define GPIO_BASE_ADDR 0x3CF00000 //24
55#define CHIP_ID_BASE_ADDR 0x3D100000 //29
56#define RTC_BASE_ADDR 0x3D200000 //10
57
58
59/* 04. CALMADM2E */
60//Following registers are mapped on IO Area in data memory area of Calm.
61//TODO: not sure if the following list is correct concerning the 'h' added to the adresses in the datasheet
62//#DEFINE 7BIT OFFSET OR IS REG16_PTR_T CORRECT??
63#define CALM_BASE 0x3F0000 //7 BITS LONG
64#define CALM_CONFIG0 (*(REG16_PTR_T)(ADM_BASE_+0x00))
65#define CALM_CONFIG1 (*(REG16_PTR_T)(ADM_BASE_+0x02))
66#define CALM_COMMUN (*(REG16_PTR_T)(ADM_BASE_+0x04))
67#define CALM_DDATA0 (*(REG16_PTR_T)(ADM_BASE_+0x06))
68#define CALM_DDATA1 (*(REG16_PTR_T)(ADM_BASE_+0x08))
69#define CALM_DDATA2 (*(REG16_PTR_T)(ADM_BASE_+0x0A))
70#define CALM_DDATA3 (*(REG16_PTR_T)(ADM_BASE_+0x0C))
71#define CALM_DDATA4 (*(REG16_PTR_T)(ADM_BASE_+0x0E))
72#define CALM_DDATA5 (*(REG16_PTR_T)(ADM_BASE_+0x10))
73#define CALM_DDATA6 (*(REG16_PTR_T)(ADM_BASE_+0x12))
74#define CALM_DDATA7 (*(REG16_PTR_T)(ADM_BASE_+0x14))
75#define CALM_UDATA0 (*(REG16_PTR_T)(ADM_BASE_+0x16))
76#define CALM_UDATA1 (*(REG16_PTR_T)(ADM_BASE_+0x18))
77#define CALM_UDATA2 (*(REG16_PTR_T)(ADM_BASE_+0x1A))
78#define CALM_UDATA3 (*(REG16_PTR_T)(ADM_BASE_+0x1C))
79#define CALM_UDATA4 (*(REG16_PTR_T)(ADM_BASE_+0x1E))
80#define CALM_UDATA5 (*(REG16_PTR_T)(ADM_BASE_+0x20))
81#define CALM_UDATA6 (*(REG16_PTR_T)(ADM_BASE_+0x22))
82#define CALM_UDATA7 (*(REG16_PTR_T)(ADM_BASE_+0x24))
83#define CALM_IBASE_H (*(REG16_PTR_T)(ADM_BASE_+0x26))
84#define CALM_IBASE_L (*(REG16_PTR_T)(ADM_BASE_+0x28))
85#define CALM_DBASE_H (*(REG16_PTR_T)(ADM_BASE_+0x2A))
86#define CALM_DBASE_L (*(REG16_PTR_T)(ADM_BASE_+0x2C))
87#define CALM_XBASE_H (*(REG16_PTR_T)(ADM_BASE_+0x2E))
88#define CALM_XBASE_L (*(REG16_PTR_T)(ADM_BASE_+0x30))
89#define CALM_YBASE_H (*(REG16_PTR_T)(ADM_BASE_+0x32))
90#define CALM_YBASE_L (*(REG16_PTR_T)(ADM_BASE_+0x34))
91#define CALM_S0BASE_H (*(REG16_PTR_T)(ADM_BASE_+0x36))
92#define CALM_SOBASE_L (*(REG16_PTR_T)(ADM_BASE_+0x38))
93#define CALM_S1BASE_H (*(REG16_PTR_T)(ADM_BASE_+0x3A))
94#define CALM_S1BASE_L (*(REG16_PTR_T)(ADM_BASE_+0x3C))
95#define CALM_CACHECON (*(REG16_PTR_T)(ADM_BASE_+0x3E))
96#define CALM_CACHESTAT (*(REG16_PTR_T)(ADM_BASE_+0x40))
97#define CALM_SBFCON (*(REG16_PTR_T)(ADM_BASE_+0x42))
98#define CALM_SBFSTAT (*(REG16_PTR_T)(ADM_BASE_+0x44))
99#define CALM_SBL0OFF_H (*(REG16_PTR_T)(ADM_BASE_+0x46))
100#define CALM_SBL0OFF_L (*(REG16_PTR_T)(ADM_BASE_+0x48))
101#define CALM_SBL1OFF_H (*(REG16_PTR_T)(ADM_BASE_+0x4A))
102#define CALM_SBL1OFF_H (*(REG16_PTR_T)(ADM_BASE_+0x4C))
103#define CALM_SBL0BEGIN_H (*(REG16_PTR_T)(ADM_BASE_+0x4E))
104#define CALM_SBL0BEGIN_L (*(REG16_PTR_T)(ADM_BASE_+0x50))
105#define CALM_SBL1BEGIN_H (*(REG16_PTR_T)(ADM_BASE_+0x52))
106#define CALM_SBL1BEGIN_L (*(REG16_PTR_T)(ADM_BASE_+0x54))
107#define CALM_SBL0END_H (*(REG16_PTR_T)(ADM_BASE_+0x56))
108#define CALM_SBL0END_L (*(REG16_PTR_T)(ADM_BASE_+0x58))
109#define CALM_SBL0END_H (*(REG16_PTR_T)(ADM_BASE_+0x5A))
110#define CALM_SBL0END_L (*(REG16_PTR_T)(ADM_BASE_+0x5C))
111//Following registers are components of SFRS of the target system
112#define ADM_CONFIG (*(REG32_PTR_T)(ADM_BASE_ADDR+0x00))
113#define ADM_COMMUN (*(REG32_PTR_T)(ADM_BASE_ADDR+0x04))
114#define ADM_DDATA0 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x10))
115#define ADM_DDATA1 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x14))
116#define ADM_DDATA2 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x18))
117#define ADM_DDATA3 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x2C))
118#define ADM_DDATA4 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x20))
119#define ADM_DDATA5 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x24))
120#define ADM_DDATA6 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x28))
121#define ADM_DDATA7 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x2C))
122#define ADM_UDATA0 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x30))
123#define ADM_UDATA1 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x34))
124#define ADM_UDATA2 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x38))
125#define ADM_UDATA3 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x3C))
126#define ADM_UDATA4 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x40))
127#define ADM_UDATA5 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x44))
128#define ADM_UDATA6 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x48))
129#define ADM_UDATA7 (*(REG32_PTR_T)(ADM_BASE_ADDR+0x4C))
130#define ADM_IBASE (*(REG32_PTR_T)(ADM_BASE_ADDR+0x50))
131#define ADM_DBASE (*(REG32_PTR_T)(ADM_BASE_ADDR+0x54))
132#define ADM_XBASE (*(REG32_PTR_T)(ADM_BASE_ADDR+0x58))
133#define ADM_YBASE (*(REG32_PTR_T)(ADM_BASE_ADDR+0x5C))
134#define ADM_S0BASE (*(REG32_PTR_T)(ADM_BASE_ADDR+0x60))
135#define ADM_S1BASE (*(REG32_PTR_T)(ADM_BASE_ADDR+0x64))
136
137/* 05. CLOCK & POWER MANAGEMENT */
138#define CLK_CON (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x00))
139#define PLL_CON (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x24))
140#define PLL0_PMS (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x04))
141#define PLL1_PMS (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x08))
142#define PLL0_CNT (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x14))
143#define PLL1_CNT (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x18))
144#define PLL_LOCK (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x20))
145#define PWR_CON (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x28))
146#define PWR_MODE (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x2C))
147#define SWR_CON (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x30))
148#define RST_SR (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x34))
149#define DSP_CLK_MD (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x38))
150#define CLK_CON (*(REG32_PTR_T)(CLCK_GEN_BASE_ADDR+0x3C))
151
152/* 06. INTERRUPT CONTROLLER UNIT */
153#define ICU_SRC_PND (*(REG32_PTR_T)(ICU_BASE_ADDR+0x00))
154#define ICU_INT_MOD (*(REG32_PTR_T)(ICU_BASE_ADDR+0x04))
155#define ICU_INT_MSK (*(REG32_PTR_T)(ICU_BASE_ADDR+0x08))
156#define ICU_PRIORITY (*(REG32_PTR_T)(ICU_BASE_ADDR+0x0C))
157#define ICU_INT_PND (*(REG32_PTR_T)(ICU_BASE_ADDR+0x10))
158#define ICU_INT_OFFSET (*(REG32_PTR_T)(ICU_BASE_ADDR+0x14))
159#define ICU_EINT_POL (*(REG32_PTR_T)(ICU_BASE_ADDR+0x18))
160#define ICU_EINT_PEND (*(REG32_PTR_T)(ICU_BASE_ADDR+0x1C))
161#define ICU_EINT_MSK (*(REG32_PTR_T)(ICU_BASE_ADDR+0x20))
162
163/* 07. MEMORY INTERFACE UNIT (MIU) */
164#define MIU_CON (*(REG32_PTR_T)(MIU_BASE_ADDR+0x00))
165#define MIU_COM (*(REG32_PTR_T)(MIU_BASE_ADDR+0x04))
166#define MIU_AREF (*(REG32_PTR_T)(MIU_BASE_ADDR+0x08))
167#define MIU_MRS (*(REG32_PTR_T)(MIU_BASE_ADDR+0x0C))
168#define MIU_SDPARA (*(REG32_PTR_T)(MIU_BASE_ADDR+0x10))
169
170#define MIU_MEM_CONF (*(REG32_PTR_T)(MIU_BASE_ADDR+0x020H)) // 9 BIT ADRESS IN DATASHEET????????
171#define MIU_USR_CMD (*(REG32_PTR_T)(MIU_BASE_ADDR+0x024H))
172#define MIU_AREF (*(REG32_PTR_T)(MIU_BASE_ADDR+0x028H))
173#define MIU_MRS (*(REG32_PTR_T)(MIU_BASE_ADDR+0x02CH))
174#define MIU_DPARAM (*(REG32_PTR_T)(MIU_BASE_ADDR+0x030H))
175#define MIU_SMEM_CONF (*(REG32_PTR_T)(MIU_BASE_ADDR+0x034H))
176#define MIU_S01PARA (*(REG32_PTR_T)(MIU_BASE_ADDR+0x038H))
177#define MIU_S23PARA (*(REG32_PTR_T)(MIU_BASE_ADDR+0x03CH))
178/* TODO:
179#define MIU_ORG
180#define MIU_DLYDQS
181#define MIU_DLYCLK
182#define MIU_DSS_SEL_B
183#define MIU_DSS_SEL_O
184#define MIU_PAD_DSS_SEL_NOR
185#define MIU_PAD_DSS_SEL_ATA
186#define MIU_SSTL2_PAD_ON
187*/
188
189/* 08. IODMA CONTROLLER */
190#define DMA_BASE0 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x00))
191#define DMA_BASE1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x20))
192#define DMA_BASE2 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x40))
193#define DMA_BASE3 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x60))
194#define DMA_CNT0 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x08))
195#define DMA_CNT1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x28))
196#define DMA_CNT2 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x48))
197#define DMA_CNT3 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x68))
198#define DMA_CADDR0 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x0C))
199#define DMA_CADDR1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x2C))
200#define DMA_CADDR2 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x4C))
201#define DMA_CADDR3 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x6C))
202#define DMA_CON0 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x04))
203#define DMA_CON1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x24))
204#define DMA_CON2 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x44))
205#define DMA_CON3 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x64))
206#define DMA_CTCNT0 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x10))
207#define DMA_CTCNT1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x30))
208#define DMA_CTCNT2 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x50))
209#define DMA_CTCNT3 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x70))
210#define DMA_COM0 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x14))
211#define DMA_COM1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x34))
212#define DMA_COM2 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x54))
213#define DMA_COM3 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x74))
214#define DMA_OFF1 (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x18))
215#define DMA_ALLST (*(REG32_PTR_T)(IODMA_BASE_ADDR+0x0100))
216
217/* 10. REAL TIMER CLOCK (RTC) */
218#define RTC_CON (*(REG32_PTR_T)(RTC_BASE_ADDR+0x00))
219#define RTC_RST (*(REG32_PTR_T)(RTC_BASE_ADDR+0x04))
220#define RTC_ALM_CON (*(REG32_PTR_T)(RTC_BASE_ADDR+0x08))
221#define RTC_ALM_SEC (*(REG32_PTR_T)(RTC_BASE_ADDR+0x0C))
222#define RTC_ALM_MIN (*(REG32_PTR_T)(RTC_BASE_ADDR+0x10))
223#define RTC_ALM_HOUR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x14))
224#define RTC_ALM_DATE (*(REG32_PTR_T)(RTC_BASE_ADDR+0x18))
225#define RTC_ALM_DAY (*(REG32_PTR_T)(RTC_BASE_ADDR+0x1C))
226#define RTC_ALM_MON (*(REG32_PTR_T)(RTC_BASE_ADDR+0x20))
227#define RTC_AML_YEAR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x24))
228#define RTC_SEC (*(REG32_PTR_T)(RTC_BASE_ADDR+0x28))
229#define RTC_MIN (*(REG32_PTR_T)(RTC_BASE_ADDR+0x2C))
230#define RTC_HOUR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x30))
231#define RTC_DATE (*(REG32_PTR_T)(RTC_BASE_ADDR+0x34))
232#define RTC_DAY (*(REG32_PTR_T)(RTC_BASE_ADDR+0x38))
233#define RTC_MON (*(REG32_PTR_T)(RTC_BASE_ADDR+0x3C))
234#define RTC_YEAR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x40))
235#define RTC_IM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x44))
236#define RTC_PEND (*(REG32_PTR_T)(RTC_BASE_ADDR+0x48))
237
238/* 09. WATCHDOG TIMER*/
239#define WDT_CON (*(REG32_PTR_T)(WDT_BASE_ADDR+0x00))
240#define WDT_CNT (*(REG32_PTR_T)(WDT_BASE_ADDR+0x04))
241
242/* 11. 16 BIT TIMER */
243#define TA_CON (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x00))
244#define TA_CMD (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x04))
245#define TA_DATA0 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x08))
246#define TA_DATA1 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x0C))
247#define TA_PRE (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x10))
248#define TA_CNT (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x14))
249#define TB_CON (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x20))
250#define TB_CMD (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x24))
251#define TB_DATA0 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x28))
252#define TB_DATA1 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x2C))
253#define TB_PRE (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x30))
254#define TB_CNT (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x34))
255#define TC_CON (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x40))
256#define TC_CMD (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x44))
257#define TC_DATA0 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x48))
258#define TC_DATA1 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x4C))
259#define TC_PRE (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x50))
260#define TC_CNT (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x54))
261#define TD_CON (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x60))
262#define TD_CMD (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x64))
263#define TD_DATA0 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x68))
264#define TD_DATA1 (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x6C))
265#define TD_PRE (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x70))
266#define TD_CNT (*(REG32_PTR_T)(TIMER_BASE_ADDR+0x74))
267
268/* 12. NAND FLASH CONTROLER */
269// TODO: FIFO
270#define FM_CTRL0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0000))
271#define FM_CTRL1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0004))
272#define FM_CMD (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0008))
273#define FM_ADR0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x000C))
274#define FM_ADR1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0010))
275#define FM_ADR2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0014))
276#define FM_ADR3 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0018))
277#define FM_ADR4 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x001C))
278#define FM_ADR5 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0020))
279#define FM_ADR6 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0024))
280#define FM_ADR7 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0028))
281#define FM_ANUM (*(REG32_PTR_T)(FMC_BASE_ADDR+0x002C))
282#define FM_DNUM (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0030))
283#define FM_DATAW0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0034))
284#define FM_DATAW1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0038))
285#define FM_DATAW2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x003C))
286#define FM_DATAW3 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0040))
287#define FM_CSTAT (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0048))
288#define FM_SYND0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x004C))
289#define FM_SYND1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0050))
290#define FM_SYND2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0054))
291#define FM_SYND3 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0058))
292#define FM_SYND4 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x005C))
293#define FM_SYND5 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0060))
294#define FM_SYND6 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0064))
295#define FM_SYND7 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0068))
296#define FM_FIFO (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0080)) // UNTILL (INCLUDING) 0x00FC <--
297#define RS_CTRL (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0100))
298#define RS_PAITY0-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0110))
299#define RS_PAITY0-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0114))
300#define RS_PAITY0-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0118))
301#define RS_PAITY1-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0120))
302#define RS_PAITY1-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0124))
303#define RS_PAITY1-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0128))
304#define RS_PAITY2-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0130))
305#define RS_PAITY2-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0134))
306#define RS_PAITY2-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0138))
307#define RS_PAITY3-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0140))
308#define RS_PAITY3-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0144))
309#define RS_PAITY3-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0148))
310#define RS_SYND0-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0150))
311#define RS_SYND0-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0154))
312#define RS_SYND0-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0158))
313#define RS_SYND1-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0160))
314#define RS_SYND1-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0164))
315#define RS_SYND1-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0168))
316#define RS_SYND2-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0170))
317#define RS_SYND2-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0174))
318#define RS_SYND2-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0178))
319#define RS_SYND3-0 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0180))
320#define RS_SYND3-1 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0184))
321#define RS_SYND3-2 (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0188))
322#define FLAG_SYND (*(REG32_PTR_T)(FMC_BASE_ADDR+0x0190))
323
324/* 13. SECURE DIGITAL CARD INTERFACE (SDCI) */
325// TODO
326
327/* 14. MEMORY STICK HOST CONTROLLER */
328//TODO
329
330/* 15. SPDIF TRANSMITTER (SPDIFOUT) */
331#define SPD_CLKCON (*(REG32_PTR_T)(SPDIF_OUT_BASE_ADDR+0x00))
332#define SPD_CON (*(REG32_PTR_T)(SPDIF_OUT_BASE_ADDR+0x04))
333#define SPD_BSTAS (*(REG32_PTR_T)(SPDIF_OUT_BASE_ADDR+0x08))
334#define SPD_CSTAS (*(REG32_PTR_T)(SPDIF_OUT_BASE_ADDR+0x0C))
335#define SPD_DAT (*(REG32_PTR_T)(SPDIF_OUT_BASE_ADDR+0x10))
336#define SPD_CNT (*(REG32_PTR_T)(SPDIF_OUT_BASE_ADDR+0x14))
337
338/* 16. REED-SOLOMON ECC CODEC */
339//TODO
340
341/* 17. IIS Tx/Rx INTERFACE */
342#define I2S_CLK_CON (*(REG32_PTR_T)(IIS_BASE_ADDR+0x00))
343#define I2S_TX_CON (*(REG32_PTR_T)(IIS_BASE_ADDR+0x04))
344#define I2S_TX_COM (*(REG32_PTR_T)(IIS_BASE_ADDR+0x08))
345#define I2S_TX_DB (*(REG32_PTR_T)(IIS_BASE_ADDR+0x10))
346#define I2S_RX_CON (*(REG32_PTR_T)(IIS_BASE_ADDR+0x30))
347#define I2S_RX_COM (*(REG32_PTR_T)(IIS_BASE_ADDR+0x34))
348#define I2S_RX_DB (*(REG32_PTR_T)(IIS_BASE_ADDR+0x38))
349#define I2S_STATUS (*(REG32_PTR_T)(IIS_BASE_ADDR+0x3C))
350
351/* 18. IIC BUS INTERFACE */
352#define IIC_CON (*(REG32_PTR_T)(IIC_BASE_ADDR+0x00))
353#define IIC_STST (*(REG32_PTR_T)(IIC_BASE_ADDR+0x04))
354#define IIC_ADD (*(REG32_PTR_T)(IIC_BASE_ADDR+0x08))
355#define IIC_DS (*(REG32_PTR_T)(IIC_BASE_ADDR+0x0C))
356
357/* 19. SPI (SERIAL PERHIPERAL INTERFACE) */
358#define SP_CLK_CON (*(REG32_PTR_T)(SPI_BASE_ADDR+0x00))
359#define SP_CON (*(REG32_PTR_T)(SPI_BASE_ADDR+0x04))
360#define SP_STA (*(REG32_PTR_T)(SPI_BASE_ADDR+0x08))
361#define SP_PIN (*(REG32_PTR_T)(SPI_BASE_ADDR+0x0C))
362#define SP_TDAT (*(REG32_PTR_T)(SPI_BASE_ADDR+0x10))
363#define SP_RDAT (*(REG32_PTR_T)(SPI_BASE_ADDR+0x14))
364#define SP_PRE (*(REG32_PTR_T)(SPI_BASE_ADDR+0x18))
365
366/* 20. ADC CONTROLLER */
367#define ADC_CON (*(REG32_PTR_T)(ADC_BASE_ADDR+0x00))
368#define ADC_TSC (*(REG32_PTR_T)(ADC_BASE_ADDR+0x04))
369#define ADC_DLY (*(REG32_PTR_T)(ADC_BASE_ADDR+0x08))
370#define ADC_DAT0 (*(REG32_PTR_T)(ADC_BASE_ADDR+0x0C))
371#define ADC_DAT1 (*(REG32_PTR_T)(ADC_BASE_ADDR+0x10))
372#define ADC_UPDN (*(REG32_PTR_T)(ADC_BASE_ADDR+0x14))
373
374/* 21. USB 2.0 FUNCTION CONTROLER SPECIAL REGISTER */
375#define USB2_IN (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x00))
376#define USB2_EIR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x04))
377#define USB2_EIER (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x08))
378#define USB2_FAR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x0C))
379#define USB2_FNR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x10))
380#define USB2_EDR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x14))
381#define USB2_TR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x18))
382#define USB2_SSR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x1C))
383#define USB2_SCR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x20))
384#define USB2_EP0SR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x24))
385#define USB2_EP0CR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x28))
386#define USB2_EP0BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x60))
387#define USB2_EP1BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x64))
388#define USB2_EP2BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x68))
389#define USB2_EP3BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x6C))
390#define USB2_EP4BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x70))
391#define USB2_EP5BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x74))
392#define USB2_EP6BR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x78))
393#define USB2_ESR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x2C))
394#define USB2_ECR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x30))
395#define USB2_BRCR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x34))
396#define USB2_BSCR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x38))
397#define USB2_MPR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x3C))
398#define USB2_MCR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x40))
399#define USB2_MTCR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x44))
400#define USB2_MFCR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x48))
401#define USB2_MTTCR1 (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x4C))
402#define USB2_MTTCR2 (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x50))
403#define USB2_MICR (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x84))
404#define USB2_MBAR1 (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x88))
405#define USB2_MBAR2 (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x8C))
406#define USB2_MCAR1 (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x94))
407#define USB2_MCAR2 (*(REG32_PTR_T)(USB_F20_BASE_ADDR+0x98))
408
409/* 22. USB 1.1 HOST CONTROLER SPECIAL REGISTER */
410#define HC_REV (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x00))
411#define HC_CON (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x04))
412#define HC_COMSTAT (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x08))
413#define HC_INTSTAT (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x0C))
414#define HC_INTEN (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x10))
415#define HC_INTDIS (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x14))
416#define HC_HCCA (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x18))
417#define HC_PCED (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x1C))
418#define HC_CHED (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x20))
419#define HC_CCED (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x24))
420#define HC_BHED (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x28))
421#define HC_BCED (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x2C))
422#define HC_DH (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x30))
423#define HC_FMI (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x34))
424#define HC_FMR (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x38))
425#define HC_FMNR (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x3C))
426#define HC_PS (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x40))
427#define HC_LSTRESH (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x44))
428#define HC_RHSECA (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x48))
429#define HC_RHDESB (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x4C))
430#define HC_STAT (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x50))
431#define HC_PSTAT (*(REG32_PTR_T)(USB_H11_BASE_ADDR+0x54))
432
433/* 23. USB 2.0 PHY CONTROL */
434#define PHY_CTRL (*(REG32_PTR_T)(USB_PHY_BASE_ADDR+0x00))
435#define ULCK_CON (*(REG32_PTR_T)(USB_PHY_BASE_ADDR+0x04))
436#define URST_CON (*(REG32_PTR_T)(USB_PHY_BASE_ADDR+0x08))
437
438/* 24. GPIO PORT CONTROLL */
439#define GPIO_PCON0 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x00))
440#define GPIO_PDAT0 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x04))
441#define GPIO_PCON1 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x10))
442#define GPIO_PDAT1 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x14))
443#define GPIO_PCON2 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x20))
444#define GPIO_PDAT2 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x24))
445#define GPIO_PCON3 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x30))
446#define GPIO_PDAT3 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x34))
447#define GPIO_PCON4 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x40))
448#define GPIO_PDAT4 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x44))
449#define GPIO_PCON5 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x50))
450#define GPIO_PDAT5 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x54))
451#define GPIO_PCON6 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x60))
452#define GPIO_PDAT6 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x64))
453#define GPIO_PCON7 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x70))
454#define GPIO_PDAT7 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0x74))
455#define GPIO_PCON10 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0xA0))
456#define GPIO_PDAT10 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0xA4))
457#define GPIO_PCON11 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0xF8))
458#define GPIO_PDAT11 (*(REG32_PTR_T)(GPIO_BASE_ADDR+0xFC))
459#define GPIO_PCON_ASRAM (*(REG32_PTR_T)(GPIO_BASE_ADDR+0xF0))
460#define GPIO_PCON_SDRAM (*(REG32_PTR_T)(GPIO_BASE_ADDR+0xF4))
461
462/* 25. UART */
463#define UART0_LCON (*(REG32_PTR_T)(UART0_BASE_ADDR+0x00))
464#define UART0_CON (*(REG32_PTR_T)(UART0_BASE_ADDR+0x04))
465#define UART0_FCON (*(REG32_PTR_T)(UART0_BASE_ADDR+0x08))
466#define UART0_MCON (*(REG32_PTR_T)(UART0_BASE_ADDR+0x0C))
467#define UART0_TRSTAT (*(REG32_PTR_T)(UART0_BASE_ADDR+0x10))
468#define UART0_ERSTAT (*(REG32_PTR_T)(UART0_BASE_ADDR+0x14))
469#define UART0_FSTAT (*(REG32_PTR_T)(UART0_BASE_ADDR+0x18))
470#define UART0_MSTAT (*(REG32_PTR_T)(UART0_BASE_ADDR+0x1C))
471#define UART0_TXH (*(REG32_PTR_T)(UART0_BASE_ADDR+0x10))
472#define UART0_RXH (*(REG32_PTR_T)(UART0_BASE_ADDR+0x24))
473#define UART0_BRDIV (*(REG32_PTR_T)(UART0_BASE_ADDR+0x28))
474
475#define UART1_LCON (*(REG32_PTR_T)(UART1_BASE_ADDR+0x00))
476#define UART1_CON (*(REG32_PTR_T)(UART1_BASE_ADDR+0x04))
477#define UART1_FCON (*(REG32_PTR_T)(UART1_BASE_ADDR+0x08))
478#define UART1_MCON (*(REG32_PTR_T)(UART1_BASE_ADDR+0x0C))
479#define UART1_TRSTAT (*(REG32_PTR_T)(UART1_BASE_ADDR+0x10))
480#define UART1_ERSTAT (*(REG32_PTR_T)(UART1_BASE_ADDR+0x14))
481#define UART1_FSTAT (*(REG32_PTR_T)(UART1_BASE_ADDR+0x18))
482#define UART1_MSTAT (*(REG32_PTR_T)(UART1_BASE_ADDR+0x1C))
483#define UART1_TXH (*(REG32_PTR_T)(UART1_BASE_ADDR+0x10))
484#define UART1_RXH (*(REG32_PTR_T)(UART1_BASE_ADDR+0x24))
485#define UART1_BRDIV (*(REG32_PTR_T)(UART1_BASE_ADDR+0x28))
486
487/* 26. LCD INTERFACE CONTROLLER */
488// TODO: WDATA
489#define LCD_CON (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x00))
490#define LCD_WCMD (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x04))
491#define LCD_RCMD (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x0C))
492#define LCD_RDATA (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x10))
493#define LCD_DBUFF (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x14))
494#define LCD_INTCON (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x18))
495#define LCD_STATUS (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x1C))
496#define LCD_PHTIME (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x20))
497#define LCD_RST_TIME (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x24))
498#define LCD_DRV_RST (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x28))
499#define LCD_WDATA (*(REG32_PTR_T)(LCD_IF_BASE_ADDR+0x40)) // UNTILL (INCLUDING) 0x5C <--
500
501/* 27. CLCD CONTROLLER */
502#define CLCD_CON1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x00))
503#define CLCD_CON2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x04))
504#define CLCD_TCON1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x08))
505#define CLCD_TCON2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x0C))
506#define CLCD_TCON3 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x10))
507#define CLCD_OSD1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x14))
508#define CLCD_OSD2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x18))
509#define CLCD_OSD3 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x1C))
510#define CLCD_B1SADDR1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x20))
511#define CLCD_B2SADDR1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x24))
512#define CLCD_F1SADDR1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x28))
513#define CLCD_F2SADDR1 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x2C))
514#define CLCD_B1SADDR2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x30))
515#define CLCD_B2SADDR2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x34))
516#define CLCD_F1SADDR2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x38))
517#define CLCD_F2SADDR2 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x3C))
518#define CLCD_B1SADDR3 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x40))
519#define CLCD_B2SADDR3 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x44))
520#define CLCD_F1SADDR3 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x48))
521#define CLCD_F2SADDR3 (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x4C))
522#define CLCD_INTCON (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x50))
523#define CLCD_KEYCON (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x54))
524#define CLCD_KEYVAL (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x58))
525#define CLCD_BGCON (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x5C))
526#define CLCD_FGCON (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x60))
527#define CLCD_DITHCON (*(REG32_PTR_T)(LCD_CTRL_BASE_ADDR+0x64))
528
529/* 28. ATA CONTROLLER */
530// TODO
531
532/* 29. CHIP ID */
533
534#define REG_ONE (*(REG32_PTR_T)(CHIP_ID_BASE_ADDR+0x00))
535#define REG_TWO (*(REG32_PTR_T)(CHIP_ID_BASE_ADDR+0x04))
536
diff --git a/firmware/target/arm/s5l8700/meizu-m6sl/adc-target.h b/firmware/target/arm/s5l8700/meizu-m6sl/adc-target.h
new file mode 100644
index 0000000000..c0a069ac0c
--- /dev/null
+++ b/firmware/target/arm/s5l8700/meizu-m6sl/adc-target.h
@@ -0,0 +1,33 @@
1/***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
9 *
10 * Copyright (C) 2006 by Barry Wardell
11 *
12 * All files in this archive are subject to the GNU General Public License.
13 * See the file COPYING in the source tree root for full license agreement.
14 *
15 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
16 * KIND, either express or implied.
17 *
18 ****************************************************************************/
19#ifndef _ADC_TARGET_H_
20#define _ADC_TARGET_H_
21
22/* only two channels used by the Gigabeat */
23#define NUM_ADC_CHANNELS 1
24
25#define ADC_UNKNOWN_1 0
26#define ADC_UNKNOWN_2 1
27#define ADC_BATTERY 2
28#define ADC_UNKNOWN_4 3
29
30#define ADC_UNREG_POWER ADC_BATTERY /* For compatibility */
31#define ADC_READ_ERROR 0xFFFF
32
33#endif
diff --git a/firmware/target/arm/s5l8700/meizu-m6sl/button-target.h b/firmware/target/arm/s5l8700/meizu-m6sl/button-target.h
new file mode 100644
index 0000000000..7d0d7a1c4d
--- /dev/null
+++ b/firmware/target/arm/s5l8700/meizu-m6sl/button-target.h
@@ -0,0 +1,52 @@
1/***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
9 *
10 * Copyright (C) 2006 by Linus Nielsen Feltzing
11 *
12 * All files in this archive are subject to the GNU General Public License.
13 * See the file COPYING in the source tree root for full license agreement.
14 *
15 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
16 * KIND, either express or implied.
17 *
18 ****************************************************************************/
19#ifndef _BUTTON_TARGET_H_
20#define _BUTTON_TARGET_H_
21
22#include <stdbool.h>
23#include "config.h"
24
25#define HAS_BUTTON_HOLD
26
27bool button_hold(void);
28void button_init_device(void);
29int button_read_device(void);
30
31/* Toshiba Gigabeat specific button codes */
32
33#define BUTTON_LEFT 0x00000001
34#define BUTTON_RIGHT 0x00000002
35#define BUTTON_UP 0x00000004
36#define BUTTON_DOWN 0x00000008
37
38#define BUTTON_SELECT 0x00000010
39
40#define BUTTON_MENU 0x00000020
41#define BUTTON_PLAY 0x00000040
42
43
44#define BUTTON_MAIN (BUTTON_MENU|BUTTON_LEFT|BUTTON_RIGHT\
45 |BUTTON_UP|BUTTON_DOWN|BUTTON_SELECT|BUTTON_PLAY)
46
47#define BUTTON_REMOTE 0
48
49#define POWEROFF_BUTTON BUTTON_PLAY
50#define POWEROFF_COUNT 10
51
52#endif /* _BUTTON_TARGET_H_ */
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-01 13:35:08 +0000