diff options
Diffstat (limited to 'firmware')
-rw-r--r-- | firmware/SOURCES | 1 | ||||
-rw-r--r-- | firmware/target/arm/imx233/button-imx233.c | 261 | ||||
-rw-r--r-- | firmware/target/arm/imx233/button-imx233.h | 174 |
3 files changed, 436 insertions, 0 deletions
diff --git a/firmware/SOURCES b/firmware/SOURCES index 38e4bef0bb..aec0884c0c 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES | |||
@@ -561,6 +561,7 @@ target/arm/imx233/adc-imx233.c | |||
561 | target/arm/imx233/lradc-imx233.c | 561 | target/arm/imx233/lradc-imx233.c |
562 | target/arm/imx233/pwm-imx233.c | 562 | target/arm/imx233/pwm-imx233.c |
563 | target/arm/imx233/rtc-imx233.c | 563 | target/arm/imx233/rtc-imx233.c |
564 | target/arm/imx233/button-imx233.c | ||
564 | #if IMX233_SUBTARGET >= 3700 | 565 | #if IMX233_SUBTARGET >= 3700 |
565 | target/arm/imx233/dcp-imx233.c | 566 | target/arm/imx233/dcp-imx233.c |
566 | #endif | 567 | #endif |
diff --git a/firmware/target/arm/imx233/button-imx233.c b/firmware/target/arm/imx233/button-imx233.c new file mode 100644 index 0000000000..4ebba41ad3 --- /dev/null +++ b/firmware/target/arm/imx233/button-imx233.c | |||
@@ -0,0 +1,261 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id$ | ||
9 | * | ||
10 | * Copyright (C) 2013 by Amaury Pouly | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License | ||
14 | * as published by the Free Software Foundation; either version 2 | ||
15 | * of the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
18 | * KIND, either express or implied. | ||
19 | * | ||
20 | ****************************************************************************/ | ||
21 | |||
22 | #include <stdlib.h> | ||
23 | |||
24 | #include "cpu.h" | ||
25 | #include "kernel.h" | ||
26 | #include "button-imx233.h" | ||
27 | #include "lradc-imx233.h" | ||
28 | #include "pinctrl-imx233.h" | ||
29 | #include "power-imx233.h" | ||
30 | #include "backlight.h" | ||
31 | |||
32 | static int delay_chan = -1; /* delay channel used to trigger */ | ||
33 | static int raw_val[LRADC_NUM_CHANNELS]; /* channel values sampled (last two) */ | ||
34 | static int chan_mask; /* trigger channel mask */ | ||
35 | static int irq_chan_mask; /* triggered channel mask */ | ||
36 | static int src_map[LRADC_NUM_SOURCES]; /* physical -> virtual channel map */ | ||
37 | static int src_mask; /* sampled source mask */ | ||
38 | #ifdef HAS_BUTTON_HOLD | ||
39 | static int hold_idx = -1; /* index of hold button in map */ | ||
40 | #endif | ||
41 | #ifdef HAVE_HEADPHONE_DETECTION | ||
42 | static int jack_idx = -1; /* index of jack detect in map */ | ||
43 | #endif | ||
44 | |||
45 | /* shortcut of button map */ | ||
46 | #define MAP imx233_button_map | ||
47 | |||
48 | /* sample rate for LRADC */ | ||
49 | #define RATE HZ | ||
50 | /* number of samples per irq */ | ||
51 | #define SAMPLES 10 | ||
52 | /* delay's delay */ | ||
53 | #define DELAY (LRADC_DELAY_FREQ / RATE / SAMPLES) | ||
54 | |||
55 | /* correct value for channel with builtin dividers */ | ||
56 | static int correct_lradc(int src, int raw) | ||
57 | { | ||
58 | if(src == LRADC_SRC_VDDIO) | ||
59 | return raw * 2; | ||
60 | else | ||
61 | return raw; | ||
62 | } | ||
63 | |||
64 | /* return raw value for the button */ | ||
65 | int imx233_button_read_raw(int idx) | ||
66 | { | ||
67 | if(MAP[idx].periph == IMX233_BUTTON_GPIO) | ||
68 | return imx233_pinctrl_get_gpio(MAP[idx].u.gpio.bank, MAP[idx].u.gpio.pin); | ||
69 | else if(MAP[idx].periph == IMX233_BUTTON_LRADC) | ||
70 | return correct_lradc(MAP[idx].u.lradc.src, raw_val[src_map[MAP[idx].u.lradc.src]]); | ||
71 | else if(MAP[idx].periph == IMX233_BUTTON_PSWITCH) | ||
72 | return imx233_power_read_pswitch(); | ||
73 | else | ||
74 | return -1; | ||
75 | } | ||
76 | |||
77 | /* return cooked (interpreted) value for the button, ignoring debouncing */ | ||
78 | static bool imx233_button_read_cooked(int idx) | ||
79 | { | ||
80 | int raw = imx233_button_read_raw(idx); | ||
81 | bool res; | ||
82 | if(MAP[idx].periph == IMX233_BUTTON_GPIO) | ||
83 | { | ||
84 | res = raw; | ||
85 | } | ||
86 | else if(MAP[idx].periph == IMX233_BUTTON_LRADC) | ||
87 | { | ||
88 | /* correct value in relative mode */ | ||
89 | int rel = MAP[idx].u.lradc.relative; | ||
90 | if(rel != -1) | ||
91 | raw = (raw * MAP[rel].u.lradc.value) / imx233_button_read_raw(rel); | ||
92 | res = abs(raw - MAP[idx].u.lradc.value) <= 30; | ||
93 | } | ||
94 | else if(MAP[idx].periph == IMX233_BUTTON_PSWITCH) | ||
95 | { | ||
96 | res = raw == MAP[idx].u.pswitch.level; | ||
97 | } | ||
98 | else | ||
99 | res = false; | ||
100 | /* handle inversion */ | ||
101 | if(MAP[idx].flags & IMX233_BUTTON_INVERTED) | ||
102 | res = !res; | ||
103 | return res; | ||
104 | } | ||
105 | |||
106 | /* finish round */ | ||
107 | static void do_round(void) | ||
108 | { | ||
109 | for(int i = 0; MAP[i].btn != IMX233_BUTTON_END; i++) | ||
110 | { | ||
111 | bool cooked = imx233_button_read_cooked(i); | ||
112 | if(MAP[i].last_val == cooked) | ||
113 | MAP[i].rounds = MIN(MAP[i].rounds + 1, MAP[i].threshold); | ||
114 | else | ||
115 | MAP[i].rounds = 1; | ||
116 | MAP[i].last_val = cooked; | ||
117 | } | ||
118 | } | ||
119 | |||
120 | /* process IRQ */ | ||
121 | static void button_lradc_irq(int chan) | ||
122 | { | ||
123 | /* read value */ | ||
124 | raw_val[chan] = imx233_lradc_read_channel(chan) / SAMPLES; | ||
125 | imx233_lradc_clear_channel(chan); | ||
126 | imx233_lradc_setup_sampling(chan, true, SAMPLES - 1); | ||
127 | /* record irq, trigger delay if all IRQs have been fired */ | ||
128 | irq_chan_mask |= 1 << chan; | ||
129 | if(irq_chan_mask == chan_mask) | ||
130 | { | ||
131 | irq_chan_mask = 0; | ||
132 | do_round(); | ||
133 | imx233_lradc_setup_delay(delay_chan, chan_mask, 0, SAMPLES - 1, DELAY); | ||
134 | imx233_lradc_kick_delay(delay_chan); | ||
135 | } | ||
136 | } | ||
137 | |||
138 | bool imx233_button_read_btn(int idx) | ||
139 | { | ||
140 | return MAP[idx].rounds >= MAP[idx].threshold ? MAP[idx].last_val : false; | ||
141 | } | ||
142 | |||
143 | int imx233_button_read(int others) | ||
144 | { | ||
145 | int res = others; | ||
146 | #ifdef HAS_BUTTON_HOLD | ||
147 | if(imx233_button_read_hold()) | ||
148 | return 0; | ||
149 | #endif | ||
150 | for(int i = 0; MAP[i].btn != IMX233_BUTTON_END; i++) | ||
151 | { | ||
152 | if(MAP[i].btn >= 0 && imx233_button_read_btn(i)) | ||
153 | res |= MAP[i].btn; | ||
154 | } | ||
155 | return res; | ||
156 | } | ||
157 | |||
158 | #ifdef HAS_BUTTON_HOLD | ||
159 | bool imx233_button_read_hold(void) | ||
160 | { | ||
161 | return imx233_button_read_btn(hold_idx); | ||
162 | } | ||
163 | |||
164 | bool __attribute__((weak)) button_hold(void) | ||
165 | { | ||
166 | bool hold_button = imx233_button_read_hold(); | ||
167 | #ifndef BOOTLOADER | ||
168 | static bool hold_button_old = false; | ||
169 | /* light handling */ | ||
170 | if (hold_button != hold_button_old) | ||
171 | { | ||
172 | hold_button_old = hold_button; | ||
173 | backlight_hold_changed(hold_button); | ||
174 | } | ||
175 | #endif /* BOOTLOADER */ | ||
176 | return hold_button; | ||
177 | } | ||
178 | #endif | ||
179 | |||
180 | #ifdef HAVE_HEADPHONE_DETECTION | ||
181 | bool imx233_button_read_jack(void) | ||
182 | { | ||
183 | return imx233_button_read_btn(jack_idx); | ||
184 | } | ||
185 | |||
186 | bool __attribute__((weak)) headphones_inserted(void) | ||
187 | { | ||
188 | return imx233_button_read_jack(); | ||
189 | } | ||
190 | #endif | ||
191 | |||
192 | /* return number of debouncing rounds by type of peripheral */ | ||
193 | static int threshold_by_periph(int periph) | ||
194 | { | ||
195 | if(periph == IMX233_BUTTON_GPIO) return 1; // no debouncing | ||
196 | if(periph == IMX233_BUTTON_LRADC) return 2; // 2 times at HZ gives ~10 ms hold | ||
197 | if(periph == IMX233_BUTTON_PSWITCH) return 10; // PSWITCH is very slow to ramp | ||
198 | return 1; // other ? | ||
199 | } | ||
200 | |||
201 | void imx233_button_init(void) | ||
202 | { | ||
203 | /* go through the table and init stuff which needs to be */ | ||
204 | for(int i = 0; MAP[i].btn != IMX233_BUTTON_END; i++) | ||
205 | { | ||
206 | MAP[i].threshold = threshold_by_periph(MAP[i].periph); | ||
207 | if(MAP[i].periph == IMX233_BUTTON_GPIO) | ||
208 | { | ||
209 | imx233_pinctrl_acquire(MAP[i].u.gpio.bank, MAP[i].u.gpio.pin, MAP[i].name); | ||
210 | imx233_pinctrl_set_function(MAP[i].u.gpio.bank, MAP[i].u.gpio.pin, PINCTRL_FUNCTION_GPIO); | ||
211 | imx233_pinctrl_enable_gpio(MAP[i].u.gpio.bank, MAP[i].u.gpio.pin, false); | ||
212 | bool pullup = !!(MAP[i].flags & IMX233_BUTTON_PULLUP); | ||
213 | imx233_pinctrl_enable_pullup(MAP[i].u.gpio.bank, MAP[i].u.gpio.pin, pullup); | ||
214 | } | ||
215 | else if(MAP[i].periph == IMX233_BUTTON_LRADC) | ||
216 | { | ||
217 | int src = MAP[i].u.lradc.src; | ||
218 | /* if channel was already acquired, there is nothing to do */ | ||
219 | if(src_mask & (1 << src)) | ||
220 | continue; | ||
221 | src_map[src] = imx233_lradc_acquire_channel(LRADC_SRC(src), TIMEOUT_NOBLOCK); | ||
222 | if(src_map[src] < 0) | ||
223 | panicf("Cannot get channel for %s", MAP[i].name); | ||
224 | imx233_lradc_setup_source(src_map[src], true, src); | ||
225 | imx233_lradc_setup_sampling(src_map[src], true, SAMPLES - 1); | ||
226 | imx233_lradc_enable_channel_irq(src_map[src], true); | ||
227 | imx233_lradc_set_channel_irq_callback(src_map[src], button_lradc_irq); | ||
228 | src_mask |= 1 << src; | ||
229 | chan_mask |= 1 << src_map[src]; | ||
230 | } | ||
231 | #ifdef HAS_BUTTON_HOLD | ||
232 | if(MAP[i].btn == IMX233_BUTTON_HOLD) | ||
233 | hold_idx = i; | ||
234 | #endif | ||
235 | #ifdef HAVE_HEADPHONE_DETECTION | ||
236 | if(MAP[i].btn == IMX233_BUTTON_JACK) | ||
237 | jack_idx = i; | ||
238 | #endif | ||
239 | } | ||
240 | #ifdef HAS_BUTTON_HOLD | ||
241 | if(hold_idx == -1) | ||
242 | panicf("No hold entry found"); | ||
243 | #endif | ||
244 | #ifdef HAVE_HEADPHONE_DETECTION | ||
245 | if(jack_idx == -1) | ||
246 | panicf("No jack entry found"); | ||
247 | #endif | ||
248 | /* create delay channel if necessary | ||
249 | * NOTE other buttons are polled as part of the delay irq processing */ | ||
250 | if(src_mask != 0) | ||
251 | { | ||
252 | delay_chan = imx233_lradc_acquire_delay(TIMEOUT_NOBLOCK); | ||
253 | if(delay_chan < 0) | ||
254 | panicf("Cannot get delay channel"); | ||
255 | imx233_lradc_setup_delay(delay_chan, chan_mask, 0, SAMPLES - 1, DELAY); | ||
256 | imx233_lradc_kick_delay(delay_chan); | ||
257 | } | ||
258 | /* otherwise we need to regularly poll for other buttons */ | ||
259 | else | ||
260 | tick_add_task(do_round); | ||
261 | } \ No newline at end of file | ||
diff --git a/firmware/target/arm/imx233/button-imx233.h b/firmware/target/arm/imx233/button-imx233.h new file mode 100644 index 0000000000..61adff8436 --- /dev/null +++ b/firmware/target/arm/imx233/button-imx233.h | |||
@@ -0,0 +1,174 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id$ | ||
9 | * | ||
10 | * Copyright (C) 2014 by Amaury Pouly | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License | ||
14 | * as published by the Free Software Foundation; either version 2 | ||
15 | * of the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
18 | * KIND, either express or implied. | ||
19 | * | ||
20 | ****************************************************************************/ | ||
21 | #ifndef __button_imx233__ | ||
22 | #define __button_imx233__ | ||
23 | |||
24 | #include "button.h" | ||
25 | #include "button-target.h" | ||
26 | #include "lradc-imx233.h" | ||
27 | #include "pinctrl-imx233.h" | ||
28 | #include "power-imx233.h" | ||
29 | |||
30 | /* special values for .btn field */ | ||
31 | #define IMX233_BUTTON_END -1 /* end of the list */ | ||
32 | #define IMX233_BUTTON_HOLD -2 /* HOLD button */ | ||
33 | #define IMX233_BUTTON_JACK -3 /* JACK detect */ | ||
34 | #define IMX233_BUTTON_VDDIO -4 /* VDDIO value */ | ||
35 | |||
36 | /* values for .periph field */ | ||
37 | #define IMX233_BUTTON_GPIO 0 /* GPIO pin */ | ||
38 | #define IMX233_BUTTON_LRADC 1 /* LRADC channel */ | ||
39 | #define IMX233_BUTTON_PSWITCH 2 /* PSWITCH */ | ||
40 | |||
41 | /* values for the .flags field */ | ||
42 | #define IMX233_BUTTON_INVERTED (1 << 0) /* invert button detection */ | ||
43 | #define IMX233_BUTTON_PULLUP (1 << 1) /* pin needs a pullup (GPIO) */ | ||
44 | |||
45 | /** target-defined | ||
46 | * NOTE for proper operation: | ||
47 | * - the table must end which a dummy entry of type IMX233_BUTTON_END | ||
48 | * - default is active: high for GPIO, around value for LRADC, exact value for PSWITCH | ||
49 | * - inverted flags reverses the above behaviour | ||
50 | * - if lradc channel is relative, the .relative field specify a entry in the | ||
51 | * button table to which it is relative. This entry must have <0 .btn value | ||
52 | * and be of type LRADC. For example, if a channel is VDDIO relative, set | ||
53 | * .relative to IMX233_BUTTON_VDDIO and create an entry which .btn set to | ||
54 | * IMX233_BUTTON_VDDIO, channel set to VDDIO source and value set to the ideal values | ||
55 | * for which no correction is necessary. Note that the IMX233_BUTTON_VDDIO value is | ||
56 | * defined for convenience */ | ||
57 | struct imx233_button_map_t | ||
58 | { | ||
59 | int btn; /* target button or magic value (END, HOLD, JACK) */ | ||
60 | int periph; /* GPIO, LRADC, or PSWITCH, ... */ | ||
61 | union | ||
62 | { | ||
63 | struct | ||
64 | { | ||
65 | int bank; | ||
66 | int pin; | ||
67 | }gpio; | ||
68 | struct | ||
69 | { | ||
70 | int src; /* source channel */ | ||
71 | int value; /* expected value */ | ||
72 | int relative; /* button to which it is relative or -1 if none */ | ||
73 | }lradc; | ||
74 | struct | ||
75 | { | ||
76 | int level; /* value of the PSWITCH field: low, mid, high */ | ||
77 | }pswitch; | ||
78 | }u; | ||
79 | int flags; /* flags */ | ||
80 | const char *name; /* name of the button */ | ||
81 | /** private fields */ | ||
82 | bool last_val; /* last interpreted value */ | ||
83 | int rounds; /* how many rounds it survived (debouncing) */ | ||
84 | int threshold; /* round threshold for acceptance */ | ||
85 | }; | ||
86 | |||
87 | /* macros for the common cases */ | ||
88 | #define IMX233_BUTTON_PATH_GPIO(bank_, pin_) .periph = IMX233_BUTTON_GPIO, \ | ||
89 | .u = {.gpio = {.bank = bank_, .pin = pin_}} | ||
90 | #define IMX233_BUTTON_PATH_LRADC_REL(src_, val_, rel_) .periph = IMX233_BUTTON_LRADC, \ | ||
91 | .u = {.lradc = {.src = src_, .value = val_, .relative = rel_}} | ||
92 | #define IMX233_BUTTON_PATH_LRADC(src_, val_) IMX233_BUTTON_PATH_LRADC_REL(src_, val_, -1) | ||
93 | #define IMX233_BUTTON_PATH_PSWITCH(lvl_) .periph = IMX233_BUTTON_PSWITCH, \ | ||
94 | .u = {.pswitch = {.level = lvl_}} | ||
95 | #define IMX233_BUTTON_PATH_END() .periph = -1 | ||
96 | /* special macro for VDDIO, for convenience */ | ||
97 | #define IMX233_BUTTON_PATH_VDDIO(val_) IMX233_BUTTON_PATH_LRADC(LRADC_SRC_VDDIO, val_) | ||
98 | |||
99 | #define IMX233_BUTTON_NAMEFLAGS1(_,name_) .name = name_ | ||
100 | #define IMX233_BUTTON_NAMEFLAGS2(_,name_,f1) .name = name_, .flags = IMX233_BUTTON_##f1 | ||
101 | #define IMX233_BUTTON_NAMEFLAGS3(_,name_,f1,f2) .name = name_, \ | ||
102 | .flags = IMX233_BUTTON_##f1 | IMX233_BUTTON_##f2 | ||
103 | #define IMX233_BUTTON_NAMEFLAGS4(_,name_,f1,f2,f3) .name = name_, \ | ||
104 | .flags =IMX233_BUTTON_##f1 | IMX233_BUTTON_##f2 | IMX233_BUTTON_##f3 | ||
105 | |||
106 | #define IMX233_BUTTON__(btn_, path_, ...) \ | ||
107 | {.btn = btn_, IMX233_BUTTON_PATH_##path_, \ | ||
108 | REG_VARIADIC(IMX233_BUTTON_NAMEFLAGS, dummy, __VA_ARGS__)} | ||
109 | #define IMX233_BUTTON_(btn_, path_, ...) \ | ||
110 | IMX233_BUTTON__(IMX233_BUTTON_##btn_, path_, __VA_ARGS__) | ||
111 | #define IMX233_BUTTON(btn_, path_, ...) \ | ||
112 | IMX233_BUTTON__(BUTTON_##btn_, path_, __VA_ARGS__) | ||
113 | |||
114 | #define IMX233_BUTTON_END_() \ | ||
115 | {.btn = IMX233_BUTTON_END} | ||
116 | |||
117 | /** | ||
118 | * This header provides macro to ease definition of buttons. There three types of | ||
119 | * buttons: | ||
120 | * - normal buttons: BUTTON_X -> defined using IMX233_BUTTON(X, ...) | ||
121 | * - special buttons IMX233_BUTTON_X -> defined using IMX233_BUTTON_(X, ...) | ||
122 | * - others: X -> defined using IMX233_BUTTON__(X, ...) | ||
123 | * A definition contains three mandatory parts and a fourth optional: | ||
124 | * IMX233_BUTTON(btn, path_spec, name [, flags]) | ||
125 | * The path_spec can be of the form: | ||
126 | * - GPIO(bank, pin) | ||
127 | * - LRADC(src, value) | ||
128 | * - LRADC_REL(src, value, rel_idx) | ||
129 | * - PSWITCH(level) | ||
130 | * - END() | ||
131 | * The optional flags are specified as a list, without the IMX233_BUTTON_ prefix. | ||
132 | * Examples: | ||
133 | * - BUTTON_POWER named "power", mapped to PSWITCH mid level, no flags: | ||
134 | * IMX233_BUTTON(POWER, PSWICTH(1), "power") | ||
135 | * - IMX233_BUTTON_JACK named "jack", mapped to GPIO B2P17 inverted and pullup: | ||
136 | * IMX233_BUTTON_(JACK, GPIO(2, 17), "jack", INVERTED, PULLUP) | ||
137 | * - BIZARRE named "bizarre", mapped to LRADC channel 0, expected value 42: | ||
138 | * IMX233_BUTTON__(BIZARRE, LRADC(0, 42), "bizarre") | ||
139 | * - BUTTON_PLAY named "play", mapped to LRADc channel 2, expected value 300 related | ||
140 | * to button entry IDX | ||
141 | * IMX233_BUTTON(PLAY, LRADC_REL(2, 300, IDX), "play") | ||
142 | * - VDDIO entry, expected value 4000 (for relative entries): | ||
143 | * IMX233_BUTTON_(VDDIO, VDDIO(4000), "vddio") | ||
144 | * - last entry: | ||
145 | * IMX233_BUTTON_(END, END(), "") | ||
146 | * | ||
147 | * The driver also provides default implementations for headphones_inserted() | ||
148 | * and button_hold() which can be overriden since they have weak linkage. | ||
149 | */ | ||
150 | |||
151 | extern struct imx233_button_map_t imx233_button_map[]; | ||
152 | |||
153 | /* initialise button driver */ | ||
154 | void imx233_button_init(void); | ||
155 | /* others gives the bitmask of other buttons: the function will OR the result | ||
156 | * with them except if hold is detected in which case 0 is always returned */ | ||
157 | int imx233_button_read(int others); | ||
158 | #ifdef HAS_BUTTON_HOLD | ||
159 | bool imx233_button_read_hold(void); | ||
160 | bool button_hold(void); | ||
161 | #endif | ||
162 | #ifdef HAVE_HEADPHONE_DETECTION | ||
163 | bool imx233_button_read_jack(void); | ||
164 | bool headphones_inserted(void); | ||
165 | #endif | ||
166 | /* return interpreted button value, after processing. | ||
167 | * Argument is an index into the imx233_button_map table */ | ||
168 | bool imx233_button_read_btn(int idx); | ||
169 | /* return raw value for a button, before any processing: GPIO state, LRADC | ||
170 | * channel value, PSWITCH value. Return -1 if there is no match. | ||
171 | * Argument is an index into the imx233_button_map table */ | ||
172 | int imx233_button_read_raw(int idx); | ||
173 | |||
174 | #endif /* __button_imx233__ */ \ No newline at end of file | ||