summaryrefslogtreecommitdiff
path: root/firmware/target/coldfire/pcf50606-coldfire.c
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/target/coldfire/pcf50606-coldfire.c')
-rw-r--r--firmware/target/coldfire/pcf50606-coldfire.c540
1 files changed, 540 insertions, 0 deletions
diff --git a/firmware/target/coldfire/pcf50606-coldfire.c b/firmware/target/coldfire/pcf50606-coldfire.c
new file mode 100644
index 0000000000..ecc9e0ee72
--- /dev/null
+++ b/firmware/target/coldfire/pcf50606-coldfire.c
@@ -0,0 +1,540 @@
1/***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
9 *
10 * Copyright (C) 2006 by Linus Nielsen Feltzing
11 *
12 * All files in this archive are subject to the GNU General Public License.
13 * See the file COPYING in the source tree root for full license agreement.
14 *
15 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
16 * KIND, either express or implied.
17 *
18 ****************************************************************************/
19#include "config.h"
20#include "system.h"
21#include "logf.h"
22#include "kernel.h"
23#include "pcf50606.h"
24
25#define USE_ASM
26
27/* Define the approprate bits for SDA and SCL being the only difference in
28 config between each player. */
29#if defined(IRIVER_H300_SERIES)
30#define SDA_BITNUM 13 /* LRCK3/GPIO45 */
31#define SCL_BITNUM 12 /* SWE/GPIO12 */
32#elif defined(IAUDIO_X5)
33#define SDA_BITNUM 12 /* SDA1/RXD1/GPIO44 */
34#define SCL_BITNUM 10 /* SCL1/TXD1/GPIO10 */
35#endif
36
37/* Data */
38#define SDA_GPIO_READ GPIO1_READ /* MBAR2 + 0x0b0 */
39#define SDA_GPIO_OUT GPIO1_OUT /* MBAR2 + 0x0b4 */
40#define SDA_GPIO_ENABLE GPIO1_ENABLE /* MBAR2 + 0x0b8 */
41#define SDA_GPIO_FUNCTION GPIO1_FUNCTION /* MBAR2 + 0x0bc */
42
43/* Clock */
44#define SCL_GPIO_READ GPIO_READ /* MBAR2 + 0x000 */
45#define SCL_GPIO_OUT GPIO_OUT /* MBAR2 + 0x004 */
46#define SCL_GPIO_ENABLE GPIO_ENABLE /* MBAR2 + 0x008 */
47#define SCL_GPIO_FUNCTION GPIO_FUNCTION /* MBAR2 + 0x00c */
48
49#define PCF50606_ADDR 0x10
50#define SCL_BIT (1ul << SCL_BITNUM)
51#define SDA_BIT (1ul << SDA_BITNUM)
52
53#define SDA ( SDA_BIT & SDA_GPIO_READ)
54#define SDA_LO_OUT or_l( SDA_BIT, &SDA_GPIO_ENABLE)
55#define SDA_HI_IN and_l(~SDA_BIT, &SDA_GPIO_ENABLE)
56
57#define SCL ( SCL_BIT & SCL_GPIO_READ)
58#define SCL_LO_OUT or_l( SCL_BIT, &SCL_GPIO_ENABLE)
59#define SCL_HI_IN and_l(~SCL_BIT, &SCL_GPIO_ENABLE); while(!SCL);
60
61#define DELAY \
62 asm ( \
63 "move.l %[dly],%%d0 \n" \
64 "1: \n" \
65 "subq.l #1,%%d0 \n" \
66 "bhi.s 1b \n" \
67 : : [dly]"d"(i2c_delay) : "d0" );
68
69void pcf50606_i2c_init(void)
70{
71 /* Bit banged I2C */
72 or_l(SDA_BIT, &SDA_GPIO_FUNCTION);
73 or_l(SCL_BIT, &SCL_GPIO_FUNCTION);
74 and_l(~SDA_BIT, &SDA_GPIO_OUT);
75 and_l(~SCL_BIT, &SCL_GPIO_OUT);
76 and_l(~SDA_BIT, &SDA_GPIO_ENABLE);
77 and_l(~SCL_BIT, &SCL_GPIO_ENABLE);
78}
79
80static int i2c_delay IDATA_ATTR = 44;
81
82void pcf50606_i2c_recalc_delay(int cpu_clock)
83{
84 i2c_delay = MAX(cpu_clock / (400000*2*3) - 7, 1);
85}
86
87inline void pcf50606_i2c_start(void)
88{
89#ifdef USE_ASM
90 asm (
91 "not.l %[sdab] \n" /* SDA_HI_IN */
92 "and.l %[sdab],(8,%[sdard]) \n"
93 "not.l %[sdab] \n"
94
95 "not.l %[sclb] \n" /* SCL_HI_IN */
96 "and.l %[sclb],(8,%[sclrd]) \n"
97 "not.l %[sclb] \n"
98 "1: \n"
99 "move.l (%[sclrd]),%%d0 \n"
100 "btst.l %[sclbnum], %%d0 \n"
101 "beq.s 1b \n"
102
103 "move.l %[dly],%%d0 \n" /* DELAY */
104 "1: \n"
105 "subq.l #1,%%d0 \n"
106 "bhi.s 1b \n"
107
108 "or.l %[sdab],(8,%[sdard]) \n" /* SDA_LO_OUT */
109
110 "move.l %[dly],%%d0 \n" /* DELAY */
111 "1: \n"
112 "subq.l #1,%%d0 \n"
113 "bhi.s 1b \n"
114
115 "or.l %[sclb],(8,%[sclrd]) \n" /* SCL_LO_OUT */
116 : /* outputs */
117 : /* inputs */
118 [sclrd] "a"(&SCL_GPIO_READ),
119 [sclb] "d"(SCL_BIT),
120 [sclbnum] "i"(SCL_BITNUM),
121 [sdard] "a"(&SDA_GPIO_READ),
122 [sdab] "d"(SDA_BIT),
123 [dly] "d"(i2c_delay)
124 : /* clobbers */
125 "d0"
126 );
127#else
128 SDA_HI_IN;
129 SCL_HI_IN;
130 DELAY;
131 SDA_LO_OUT;
132 DELAY;
133 SCL_LO_OUT;
134#endif
135}
136
137inline void pcf50606_i2c_stop(void)
138{
139#ifdef USE_ASM
140 asm (
141 "or.l %[sdab],(8,%[sdard]) \n" /* SDA_LO_OUT */
142
143 "not.l %[sclb] \n" /* SCL_HI_IN */
144 "and.l %[sclb],(8,%[sclrd]) \n"
145 "not.l %[sclb] \n"
146 "1: \n"
147 "move.l (%[sclrd]),%%d0 \n"
148 "btst.l %[sclbnum],%%d0 \n"
149 "beq.s 1b \n"
150
151 "move.l %[dly],%%d0 \n" /* DELAY */
152 "1: \n"
153 "subq.l #1,%%d0 \n"
154 "bhi.s 1b \n"
155
156 "not.l %[sdab] \n" /* SDA_HI_IN */
157 "and.l %[sdab],(8,%[sdard]) \n"
158 "not.l %[sdab] \n"
159 : /* outputs */
160 : /* inputs */
161 [sclrd] "a"(&SCL_GPIO_READ),
162 [sclb] "d"(SCL_BIT),
163 [sclbnum] "i"(SCL_BITNUM),
164 [sdard] "a"(&SDA_GPIO_READ),
165 [sdab] "d"(SDA_BIT),
166 [dly] "d"(i2c_delay)
167 : /* clobbers */
168 "d0"
169 );
170#else
171 SDA_LO_OUT;
172 SCL_HI_IN;
173 DELAY;
174 SDA_HI_IN;
175#endif
176}
177
178inline void pcf50606_i2c_ack(bool ack)
179{
180#ifdef USE_ASM
181 asm (
182 "tst.b %[ack] \n" /* if (!ack) */
183 "bne.s 1f \n"
184
185 "not.l %[sdab] \n" /* SDA_HI_IN */
186 "and.l %[sdab],(8,%[sdard]) \n"
187 "not.l %[sdab] \n"
188 ".word 0x51fb \n" /* trapf.l : else */
189 "1: \n"
190 "or.l %[sdab],(8,%[sdard]) \n" /* SDA_LO_OUT */
191
192 "not.l %[sclb] \n" /* SCL_HI_IN */
193 "and.l %[sclb],(8,%[sclrd]) \n"
194 "not.l %[sclb] \n"
195 "1: \n"
196 "move.l (%[sclrd]),%%d0 \n"
197 "btst.l %[sclbnum],%%d0 \n"
198 "beq.s 1b \n"
199
200 "move.l %[dly],%%d0 \n" /* DELAY */
201 "1: \n"
202 "subq.l #1,%%d0 \n"
203 "bhi.s 1b \n"
204
205 "or.l %[sclb],(8,%[sclrd]) \n" /* SCL_LO_OUT */
206 : /* outputs */
207 : /* inputs */
208 [sclrd] "a"(&SCL_GPIO_READ),
209 [sclb] "d"(SCL_BIT),
210 [sclbnum] "i"(SCL_BITNUM),
211 [sdard] "a"(&SDA_GPIO_READ),
212 [sdab] "d"(SDA_BIT),
213 [dly] "d"(i2c_delay),
214 [ack] "d"(ack)
215 : /* clobbers */
216 "d0"
217 );
218#else
219 if(ack)
220 SDA_LO_OUT;
221 else
222 SDA_HI_IN;
223
224 SCL_HI_IN;
225
226 DELAY;
227 SCL_LO_OUT;
228#endif
229}
230
231inline bool pcf50606_i2c_getack(void)
232{
233 bool ret;
234
235#ifdef USE_ASM
236 asm (
237 "not.l %[sdab] \n" /* SDA_HI_IN */
238 "and.l %[sdab],(8,%[sdard]) \n"
239 "not.l %[sdab] \n"
240
241 "move.l %[dly],%%d0 \n" /* DELAY */
242 "1: \n"
243 "subq.l #1,%%d0 \n"
244 "bhi.s 1b \n"
245
246 "not.l %[sclb] \n" /* SCL_HI_IN */
247 "and.l %[sclb],(8,%[sclrd]) \n"
248 "not.l %[sclb] \n"
249 "1: \n"
250 "move.l (%[sclrd]),%%d0 \n"
251 "btst.l %[sclbnum],%%d0 \n"
252 "beq.s 1b \n"
253
254 "move.l (%[sdard]),%%d0 \n" /* ret = !SDA */
255 "btst.l %[sdabnum],%%d0 \n"
256 "seq.b %[ret] \n"
257
258 "or.l %[sclb],(8,%[sclrd]) \n" /* SCL_LO_OUT */
259
260 "move.l %[dly],%%d0 \n" /* DELAY */
261 "1: \n"
262 "subq.l #1,%%d0 \n"
263 "bhi.s 1b \n"
264 : /* outputs */
265 [ret] "=&d"(ret)
266 : /* inputs */
267 [sclrd] "a"(&SCL_GPIO_READ),
268 [sclb] "d"(SCL_BIT),
269 [sclbnum] "i"(SCL_BITNUM),
270 [sdard] "a"(&SDA_GPIO_READ),
271 [sdab] "d"(SDA_BIT),
272 [sdabnum] "i"(SDA_BITNUM),
273 [dly] "d"(i2c_delay)
274 : /* clobbers */
275 "d0"
276 );
277#else
278 SDA_HI_IN;
279 DELAY;
280 SCL_HI_IN;
281
282 ret = !SDA;
283
284 SCL_LO_OUT;
285 DELAY;
286#endif
287 return ret;
288}
289
290void pcf50606_i2c_outb(unsigned char byte)
291{
292#ifdef USE_ASM
293 asm volatile (
294 "moveq.l #24,%%d0 \n" /* byte <<= 24 */
295 "lsl.l %%d0,%[byte] \n"
296 "moveq.l #8,%%d1 \n" /* i = 8 */
297
298 "2: \n" /* do */
299 "lsl.l #1,%[byte] \n" /* if ((byte <<= 1) carry) */
300 "bcc.s 1f \n"
301
302 "not.l %[sdab] \n" /* SDA_HI_IN */
303 "and.l %[sdab],(8,%[sdard]) \n"
304 "not.l %[sdab] \n"
305 ".word 0x51fb \n" /* trapf.l; else */
306 "1: \n"
307 "or.l %[sdab],(8,%[sdard]) \n" /* SDA_LO_OUT */
308
309 "move.l %[dly],%%d0 \n" /* DELAY */
310 "1: \n"
311 "subq.l #1,%%d0 \n"
312 "bhi.s 1b \n"
313
314 "not.l %[sclb] \n" /* SCL_HI_IN */
315 "and.l %[sclb],(8,%[sclrd]) \n"
316 "not.l %[sclb] \n"
317 "1: \n"
318 "move.l (%[sclrd]),%%d0 \n"
319 "btst.l %[sclbnum],%%d0 \n"
320 "beq.s 1b \n"
321
322 "move.l %[dly],%%d0 \n" /* DELAY */
323 "1: \n"
324 "subq.l #1,%%d0 \n"
325 "bhi.s 1b \n"
326
327 "or.l %[sclb],(8,%[sclrd]) \n" /* SCL_LO_OUT */
328
329 "subq.l #1,%%d1 \n" /* i-- */
330 "bne.s 2b \n" /* while (i != 0) */
331 : /* outputs */
332 [byte] "+d"(byte)
333 : /* inputs */
334 [sclrd] "a"(&SCL_GPIO_READ),
335 [sclb] "d"(SCL_BIT),
336 [sclbnum] "i"(SCL_BITNUM),
337 [sdard] "a"(&SDA_GPIO_READ),
338 [sdab] "d"(SDA_BIT),
339 [dly] "d"(i2c_delay)
340 : /* clobbers */
341 "d0", "d1"
342 );
343#else
344 int i;
345
346 /* clock out each bit, MSB first */
347 for ( i=0x80; i; i>>=1 )
348 {
349 if ( i & byte )
350 SDA_HI_IN;
351 else
352 SDA_LO_OUT;
353 DELAY;
354 SCL_HI_IN;
355 DELAY;
356 SCL_LO_OUT;
357 }
358#endif
359}
360
361unsigned char pcf50606_i2c_inb(bool ack)
362{
363 unsigned char byte = 0;
364
365#ifdef USE_ASM
366 asm (
367 "not.l %[sdab] \n" /* SDA_HI_IN */
368 "and.l %[sdab],(8,%[sdard]) \n"
369 "not.l %[sdab] \n"
370
371 "moveq.l #8,%%d1 \n" /* i = 8 */
372 "clr.l %[byte] \n" /* byte = 0 */
373
374 "2: \n" /* do */
375 "not.l %[sclb] \n" /* SCL_HI_IN */
376 "and.l %[sclb],(8,%[sclrd]) \n"
377 "not.l %[sclb] \n"
378 "1: \n"
379 "move.l (%[sclrd]),%%d0 \n"
380 "btst.l %[sclbnum],%%d0 \n"
381 "beq.s 1b \n"
382
383 "move.l %[dly],%%d0 \n" /* DELAY */
384 "1: \n"
385 "subq.l #1,%%d0 \n"
386 "bhi.s 1b \n"
387
388 "lsl.l #1,%[byte] \n" /* byte <<= 1 */
389 "move.l (%[sdard]),%%d0 \n" /* if (SDA) */
390 "btst.l %[sdabnum],%%d0 \n"
391 "beq.s 1f \n"
392 "addq.l #1,%[byte] \n" /* byte++ */
393 "1: \n"
394
395 "or.l %[sclb],(8,%[sclrd]) \n" /* SCL_LO_OUT */
396
397 "move.l %[dly],%%d0 \n" /* DELAY */
398 "1: \n"
399 "subq.l #1,%%d0 \n"
400 "bhi.s 1b \n"
401
402 "subq.l #1,%%d1 \n" /* i-- */
403 "bne.s 2b \n" /* while (i != 0) */
404 : /* outputs */
405 [byte] "=&d"(byte)
406 : /* inputs */
407 [sclrd] "a"(&SCL_GPIO_READ),
408 [sclb] "d"(SCL_BIT),
409 [sclbnum] "i"(SCL_BITNUM),
410 [sdard] "a"(&SDA_GPIO_READ),
411 [sdab] "d"(SDA_BIT),
412 [sdabnum] "i"(SDA_BITNUM),
413 [dly] "d"(i2c_delay)
414 : /* clobbers */
415 "d0", "d1"
416 );
417#else
418 int i;
419
420 /* clock in each bit, MSB first */
421 SDA_HI_IN;
422 for ( i=0x80; i; i>>=1 )
423 {
424 SCL_HI_IN;
425 DELAY;
426 if ( SDA )
427 byte |= i;
428 SCL_LO_OUT;
429 DELAY;
430 }
431#endif
432
433 pcf50606_i2c_ack(ack);
434
435 return byte;
436}
437
438int pcf50606_i2c_write(int address, const unsigned char* buf, int count)
439{
440 int i,x=0;
441
442 pcf50606_i2c_start();
443 pcf50606_i2c_outb(address & 0xfe);
444 if (pcf50606_i2c_getack())
445 {
446 for (i=0; i<count; i++)
447 {
448 pcf50606_i2c_outb(buf[i]);
449 if (!pcf50606_i2c_getack())
450 {
451 x=-2;
452 break;
453 }
454 }
455 }
456 else
457 {
458 logf("pcf50606_i2c_write() - no ack\n");
459 x=-1;
460 }
461 return x;
462}
463
464int pcf50606_read_multiple(int address, unsigned char* buf, int count)
465{
466 int i=0;
467 int ret = 0;
468 unsigned char obuf[1];
469
470 obuf[0] = address;
471
472 /* send read command */
473 if (pcf50606_i2c_write(PCF50606_ADDR, obuf, 1) >= 0)
474 {
475 pcf50606_i2c_start();
476 pcf50606_i2c_outb(0x11);
477 if (pcf50606_i2c_getack())
478 {
479 for(i = 0;i < count-1;i++)
480 buf[i] = pcf50606_i2c_inb(true);
481
482 buf[i] = pcf50606_i2c_inb(false);
483 }
484 else
485 {
486 ret = -1;
487 }
488 }
489
490 pcf50606_i2c_stop();
491
492 return ret;
493}
494
495int pcf50606_read(int address)
496{
497 int ret;
498 unsigned char c;
499
500 ret = pcf50606_read_multiple(address, &c, 1);
501 if(ret >= 0)
502 return c;
503 else
504 return ret;
505}
506
507int pcf50606_write_multiple(int address, const unsigned char* buf, int count)
508{
509 unsigned char obuf[1];
510 int i;
511 int ret = 0;
512
513 obuf[0] = address;
514
515 /* send write command */
516 if (pcf50606_i2c_write(PCF50606_ADDR, obuf, 1) >= 0)
517 {
518 for (i=0; i<count; i++)
519 {
520 pcf50606_i2c_outb(buf[i]);
521 if (!pcf50606_i2c_getack())
522 {
523 ret = -2;
524 break;
525 }
526 }
527 }
528 else
529 {
530 ret = -1;
531 }
532
533 pcf50606_i2c_stop();
534 return ret;
535}
536
537int pcf50606_write(int address, unsigned char val)
538{
539 return pcf50606_write_multiple(address, &val, 1);
540}
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-17 23:01:20 +0000