1 files changed, 8 insertions, 1 deletions

diff --git a/firmware/target/arm/imx233/sansa-fuzeplus/lcd-fuzeplus.c b/firmware/target/arm/imx233/sansa-fuzeplus/lcd-fuzeplus.c
index b83c49d092..20b46fdc63 100644
--- a/firmware/target/arm/imx233/sansa-fuzeplus/lcd-fuzeplus.c
+++ b/firmware/target/arm/imx233/sansa-fuzeplus/lcd-fuzeplus.c
@@ -56,6 +56,13 @@ static void setup_lcd_pins(bool use_lcdif)
     /* WARNING
      * the B1P22 and B1P24 pins are used by the tuner i2c! Do NOT drive
      * them as lcd_dotclk and lcd_hsync or it will break the tuner! */
+    imx233_pinctrl_acquire_pin(1, 18, "lcd reset");
+    imx233_pinctrl_acquire_pin(1, 19, "lcd rs");
+    imx233_pinctrl_acquire_pin(1, 20, "lcd wr");
+    imx233_pinctrl_acquire_pin(1, 21, "lcd cs");
+    imx233_pinctrl_acquire_pin(1, 23, "lcd enable");
+    imx233_pinctrl_acquire_pin(1, 25, "lcd vsync");
+    imx233_pinctrl_acquire_pin_mask(1, 0x3ffff, "lcd data");
     if(use_lcdif)
     {
         imx233_set_pin_function(1, 25, PINCTRL_FUNCTION_GPIO); /* lcd_vsync */
@@ -71,7 +78,7 @@ static void setup_lcd_pins(bool use_lcdif)
     else
     {
         __REG_SET(HW_PINCTRL_MUXSEL(2)) = 0xffffffff; /* lcd_d{0-15} */
-        imx233_enable_gpio_output_mask(1, 0x3ffffff, false); /* lcd_{d{0-17},reset,rs,wr,cs,dotclk,enable,hsync,vsync} */
+        imx233_enable_gpio_output_mask(1, 0x2bfffff, false); /* lcd_{d{0-17},reset,rs,wr,cs,enable,vsync} */
         imx233_set_pin_function(1, 16, PINCTRL_FUNCTION_GPIO); /* lcd_d16 */
         imx233_set_pin_function(1, 17, PINCTRL_FUNCTION_GPIO); /* lcd_d17 */
         imx233_set_pin_function(1, 19, PINCTRL_FUNCTION_GPIO); /* lcd_rs */