diff options
Diffstat (limited to 'firmware/target/arm/as3525/debug-as3525.c')
-rw-r--r-- | firmware/target/arm/as3525/debug-as3525.c | 380 |
1 files changed, 188 insertions, 192 deletions
diff --git a/firmware/target/arm/as3525/debug-as3525.c b/firmware/target/arm/as3525/debug-as3525.c index bb731242aa..c4c4a7f4dc 100644 --- a/firmware/target/arm/as3525/debug-as3525.c +++ b/firmware/target/arm/as3525/debug-as3525.c | |||
@@ -22,7 +22,7 @@ | |||
22 | #include <stdbool.h> | 22 | #include <stdbool.h> |
23 | #include "system.h" | 23 | #include "system.h" |
24 | #include "kernel.h" | 24 | #include "kernel.h" |
25 | #include "button.h" | 25 | #include "action.h" |
26 | #include "lcd.h" | 26 | #include "lcd.h" |
27 | #include "font.h" | 27 | #include "font.h" |
28 | #include "cpu.h" | 28 | #include "cpu.h" |
@@ -31,7 +31,13 @@ | |||
31 | #include "adc.h" | 31 | #include "adc.h" |
32 | #include "storage.h" | 32 | #include "storage.h" |
33 | 33 | ||
34 | #define DEBUG_CANCEL BUTTON_LEFT | 34 | #define DEBUG_CANCEL ACTION_STD_CANCEL |
35 | #define DEBUG_NEXT ACTION_STD_NEXT | ||
36 | #define DEBUG_LEFT_JUSTIFY ACTION_STD_OK | ||
37 | #define DEBUG_LEFT_SCROLL ACTION_STD_MENU | ||
38 | |||
39 | /* if the possiblity exists to divide by zero protect with this macro */ | ||
40 | #define DIV_FINITE(dividend, divisor) ((divisor == 0)? divisor : dividend/divisor) | ||
35 | 41 | ||
36 | #define ON "Enabled" | 42 | #define ON "Enabled" |
37 | #define OFF "Disabled" | 43 | #define OFF "Disabled" |
@@ -41,21 +47,28 @@ | |||
41 | #define CP15_IC (1<<12) /* icache off/on */ | 47 | #define CP15_IC (1<<12) /* icache off/on */ |
42 | 48 | ||
43 | #define CLK_MAIN 24000000 /* 24 MHz */ | 49 | #define CLK_MAIN 24000000 /* 24 MHz */ |
50 | #define D_MHZ 1000000 | ||
51 | #define D_KHZ 1000 | ||
44 | 52 | ||
45 | #define CLK_PLLA 0 | 53 | enum dbg_clocks |
46 | #define CLK_PLLB 1 | 54 | { |
47 | #define CLK_PROC 2 | 55 | CLK_PLLA = 0x0, |
48 | #define CLK_FCLK 3 | 56 | CLK_PLLB, |
49 | #define CLK_EXTMEM 4 | 57 | CLK_PROC, |
50 | #define CLK_PCLK 5 | 58 | CLK_FCLK, |
51 | #define CLK_IDE 6 | 59 | CLK_EXTMEM, |
52 | #define CLK_I2C 7 | 60 | CLK_PCLK, |
53 | #define CLK_I2SI 8 | 61 | CLK_IDE, |
54 | #define CLK_I2SO 9 | 62 | CLK_I2C, |
55 | #define CLK_DBOP 10 | 63 | CLK_I2SI, |
56 | #define CLK_SD_MCLK_NAND 11 | 64 | CLK_I2SO, |
57 | #define CLK_SD_MCLK_MSD 12 | 65 | CLK_DBOP, |
58 | #define CLK_USB 13 | 66 | CLK_SD_MCLK_NAND, |
67 | CLK_SD_MCLK_MSD, | ||
68 | CLK_SD_SLOT, | ||
69 | CLK_USB, | ||
70 | CLK_SSP, | ||
71 | }; | ||
59 | 72 | ||
60 | #define MCI_NAND *((volatile unsigned long *)(NAND_FLASH_BASE + 0x04)) | 73 | #define MCI_NAND *((volatile unsigned long *)(NAND_FLASH_BASE + 0x04)) |
61 | #define MCI_SD *((volatile unsigned long *)(SD_MCI_BASE + 0x04)) | 74 | #define MCI_SD *((volatile unsigned long *)(SD_MCI_BASE + 0x04)) |
@@ -79,6 +92,7 @@ static int calc_freq(int clk) | |||
79 | unsigned int postdiv = ((unsigned int)CGU_PROC>>4) & 0xf; | 92 | unsigned int postdiv = ((unsigned int)CGU_PROC>>4) & 0xf; |
80 | unsigned int u_out_div; | 93 | unsigned int u_out_div; |
81 | #if CONFIG_CPU == AS3525 | 94 | #if CONFIG_CPU == AS3525 |
95 | |||
82 | switch(clk) { | 96 | switch(clk) { |
83 | /* clk_main = clk_int = 24MHz oscillator */ | 97 | /* clk_main = clk_int = 24MHz oscillator */ |
84 | case CLK_PLLA: | 98 | case CLK_PLLA: |
@@ -89,10 +103,9 @@ static int calc_freq(int clk) | |||
89 | u_out_div = ((CGU_PLLA>>13) & 0x3); /* bits 13:14 */ | 103 | u_out_div = ((CGU_PLLA>>13) & 0x3); /* bits 13:14 */ |
90 | if (u_out_div == 3) /* for 11 NO=4 */ | 104 | if (u_out_div == 3) /* for 11 NO=4 */ |
91 | u_out_div=4; | 105 | u_out_div=4; |
92 | if(u_out_div) /* NO = 0 not allowed */ | 106 | /* NO = 0 not allowed */ |
93 | return ((2 * (CGU_PLLA & 0xff))*CLK_MAIN)/ | 107 | return DIV_FINITE(((2 * (CGU_PLLA & 0xff))*CLK_MAIN), |
94 | (((CGU_PLLA>>8) & 0x1f)*u_out_div); | 108 | (((CGU_PLLA>>8) & 0x1f)*u_out_div)); |
95 | return 0; | ||
96 | case CLK_PLLB: | 109 | case CLK_PLLB: |
97 | if(CGU_PLLBSUP & (1<<3)) | 110 | if(CGU_PLLBSUP & (1<<3)) |
98 | return 0; | 111 | return 0; |
@@ -101,12 +114,12 @@ static int calc_freq(int clk) | |||
101 | u_out_div = ((CGU_PLLB>>13) & 0x3); /* bits 13:14 */ | 114 | u_out_div = ((CGU_PLLB>>13) & 0x3); /* bits 13:14 */ |
102 | if (u_out_div == 3) /* for 11 NO=4 */ | 115 | if (u_out_div == 3) /* for 11 NO=4 */ |
103 | u_out_div=4; | 116 | u_out_div=4; |
104 | if(u_out_div) /* NO = 0 not allowed */ | 117 | /* NO = 0 not allowed */ |
105 | return ((2 * (CGU_PLLB & 0xff))*CLK_MAIN)/ | 118 | return DIV_FINITE(((2 * (CGU_PLLB & 0xff))*CLK_MAIN), |
106 | (((CGU_PLLB>>8) & 0x1f)*u_out_div); | 119 | (((CGU_PLLB>>8) & 0x1f)*u_out_div)); |
107 | return 0; | 120 | #else /* AS3525v2 */ |
108 | #else | ||
109 | int od, f, r; | 121 | int od, f, r; |
122 | |||
110 | /* AS3525v2 */ | 123 | /* AS3525v2 */ |
111 | switch(clk) { | 124 | switch(clk) { |
112 | case CLK_PLLA: | 125 | case CLK_PLLA: |
@@ -126,7 +139,20 @@ static int calc_freq(int clk) | |||
126 | r = ((CGU_PLLB >> 7) & 0x7) + 1; | 139 | r = ((CGU_PLLB >> 7) & 0x7) + 1; |
127 | od = (CGU_PLLB >> 10) & 1 ? 2 : 1; | 140 | od = (CGU_PLLB >> 10) & 1 ? 2 : 1; |
128 | return (CLK_MAIN / 2) * f / (r * od); | 141 | return (CLK_MAIN / 2) * f / (r * od); |
129 | #endif | 142 | |
143 | case CLK_SD_SLOT: | ||
144 | switch(CGU_SDSLOT & 3) { | ||
145 | case 0: | ||
146 | return CLK_MAIN/(((CGU_SDSLOT>>2)& 0xf)+1); | ||
147 | case 1: | ||
148 | return calc_freq(CLK_PLLA)/(((CGU_SDSLOT>>2)& 0xf)+1); | ||
149 | case 2: | ||
150 | return calc_freq(CLK_PLLB)/(((CGU_SDSLOT>>2)& 0xf)+1); | ||
151 | default: | ||
152 | return 0; | ||
153 | } | ||
154 | #endif /* CONFIG_CPU == AS3525 */ | ||
155 | |||
130 | case CLK_PROC: | 156 | case CLK_PROC: |
131 | #if CONFIG_CPU == AS3525 /* not in arm926-ejs */ | 157 | #if CONFIG_CPU == AS3525 /* not in arm926-ejs */ |
132 | if (!(read_cp15()>>30)) /* fastbus */ | 158 | if (!(read_cp15()>>30)) /* fastbus */ |
@@ -150,10 +176,10 @@ static int calc_freq(int clk) | |||
150 | case CLK_EXTMEM: | 176 | case CLK_EXTMEM: |
151 | #if CONFIG_CPU == AS3525 | 177 | #if CONFIG_CPU == AS3525 |
152 | switch(CGU_PERI & 3) { | 178 | switch(CGU_PERI & 3) { |
153 | #else | 179 | #else /* as3525v2 */ |
154 | /* bits 1:0 of CGU_PERI always read as 0 and source = FCLK */ | 180 | /* bits 1:0 of CGU_PERI always read as 0 and source = FCLK */ |
155 | switch(3) { | 181 | switch(3) { |
156 | #endif | 182 | #endif /* CONFIG_CPU == AS3525 */ |
157 | case 0: | 183 | case 0: |
158 | return CLK_MAIN/(((CGU_PERI>>2)& 0xf)+1); | 184 | return CLK_MAIN/(((CGU_PERI>>2)& 0xf)+1); |
159 | case 1: | 185 | case 1: |
@@ -179,7 +205,8 @@ static int calc_freq(int clk) | |||
179 | } | 205 | } |
180 | case CLK_I2C: | 206 | case CLK_I2C: |
181 | ams_i2c_get_debug_cpsr(&u_out_div); | 207 | ams_i2c_get_debug_cpsr(&u_out_div); |
182 | return calc_freq(CLK_PCLK)/(u_out_div); | 208 | /* NO = 0 not allowed */ |
209 | return DIV_FINITE(calc_freq(CLK_PCLK), (u_out_div)); | ||
183 | case CLK_I2SI: | 210 | case CLK_I2SI: |
184 | switch((CGU_AUDIO>>12) & 3) { | 211 | switch((CGU_AUDIO>>12) & 3) { |
185 | case 0: | 212 | case 0: |
@@ -219,7 +246,12 @@ static int calc_freq(int clk) | |||
219 | return calc_freq(CLK_PCLK); | 246 | return calc_freq(CLK_PCLK); |
220 | else | 247 | else |
221 | return calc_freq(CLK_PCLK)/(((MCI_SD & 0xff)+1)*2); | 248 | return calc_freq(CLK_PCLK)/(((MCI_SD & 0xff)+1)*2); |
222 | #endif | 249 | #else /* as3525v2 */ |
250 | case CLK_SSP: | ||
251 | /* NO = 0 not allowed */ | ||
252 | return DIV_FINITE(calc_freq(CLK_PCLK), SSP_CPSR); | ||
253 | #endif /* CONFIG_CPU == AS3525 */ | ||
254 | |||
223 | case CLK_USB: | 255 | case CLK_USB: |
224 | switch(CGU_USB & 3) { /* 0-> div=1 other->div=1/(2*n) */ | 256 | switch(CGU_USB & 3) { /* 0-> div=1 other->div=1/(2*n) */ |
225 | case 0: | 257 | case 0: |
@@ -245,174 +277,172 @@ static int calc_freq(int clk) | |||
245 | } | 277 | } |
246 | } | 278 | } |
247 | 279 | ||
280 | static bool dbg_btn(bool *done, int *x) | ||
281 | { | ||
282 | bool cont = !*done; | ||
283 | if (cont) | ||
284 | { | ||
285 | lcd_update(); | ||
286 | int button = get_action(CONTEXT_STD,HZ/10); | ||
287 | switch(button) | ||
288 | { | ||
289 | case DEBUG_CANCEL: | ||
290 | *done = true; | ||
291 | case DEBUG_NEXT: | ||
292 | cont = false; | ||
293 | case DEBUG_LEFT_JUSTIFY: | ||
294 | (*x) = 0; | ||
295 | sleep(HZ/5); | ||
296 | break; | ||
297 | case DEBUG_LEFT_SCROLL: | ||
298 | (*x)--; | ||
299 | } | ||
300 | } | ||
301 | lcd_clear_display(); | ||
302 | return cont; | ||
303 | } | ||
304 | |||
248 | bool dbg_hw_info(void) | 305 | bool dbg_hw_info(void) |
249 | { | 306 | { |
250 | int line; | 307 | int line; |
308 | int x = 0; | ||
309 | bool done = false; | ||
310 | |||
251 | lcd_clear_display(); | 311 | lcd_clear_display(); |
252 | lcd_setfont(FONT_SYSFIXED); | 312 | lcd_setfont(FONT_SYSFIXED); |
253 | 313 | ||
254 | while(1) | 314 | while(!done) |
255 | { | 315 | { |
256 | while(1) | 316 | while(dbg_btn(&done, &x)) |
257 | { | 317 | { |
258 | #if defined(SANSA_C200V2) || defined(SANSA_FUZEV2) || \ | 318 | #if defined(SANSA_C200V2) || defined(SANSA_FUZEV2) || \ |
259 | defined(SANSA_CLIPPLUS) || defined(SANSA_CLIPZIP) | 319 | defined(SANSA_CLIPPLUS) || defined(SANSA_CLIPZIP) |
260 | lcd_clear_display(); | 320 | |
261 | line = 0; | 321 | line = 0; |
262 | lcd_puts(0, line++, "[Submodel:]"); | 322 | lcd_puts(x, line++, "[Submodel:]"); |
263 | #if defined(SANSA_C200V2) | 323 | #if defined(SANSA_C200V2) |
264 | lcd_putsf(0, line++, "C200v2 variant %d", c200v2_variant); | 324 | lcd_putsf(x, line++, "C200v2 variant %d", c200v2_variant); |
265 | #elif defined(SANSA_FUZEV2) || defined(SANSA_CLIPPLUS) || \ | 325 | #elif defined(SANSA_FUZEV2) || defined(SANSA_CLIPPLUS) || \ |
266 | defined(SANSA_CLIPZIP) | 326 | defined(SANSA_CLIPZIP) |
267 | lcd_putsf(0, line++, "AMSv2 variant %d", amsv2_variant); | 327 | lcd_putsf(x, line++, "AMSv2 variant %d", amsv2_variant); |
268 | #endif | 328 | #endif |
269 | lcd_update(); | ||
270 | int btn = button_get_w_tmo(HZ/10); | ||
271 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
272 | goto end; | ||
273 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
274 | break; | ||
275 | } | 329 | } |
276 | while(1) | 330 | while(dbg_btn(&done, &x)) |
277 | { | 331 | { |
278 | #endif | 332 | #endif |
279 | lcd_clear_display(); | ||
280 | line = 0; | 333 | line = 0; |
281 | lcd_puts(0, line++, "[Clock Frequencies:]"); | 334 | lcd_puts(x, line++, "[Clock Frequencies:]"); |
282 | lcd_puts(0, line++, " SET ACTUAL"); | 335 | lcd_puts(x, line++, " SET ACTUAL"); |
283 | #if CONFIG_CPU == AS3525 | 336 | #if CONFIG_CPU == AS3525 |
284 | lcd_putsf(0, line++, "922T:%s %3dMHz", | 337 | lcd_putsf(x, line++, "922T:%s %3dMHz", |
285 | (!(read_cp15()>>30)) ? "FAST " : | 338 | (!(read_cp15()>>30)) ? "FAST " : |
286 | (read_cp15()>>31) ? "ASYNC" : "SYNC ", | 339 | (read_cp15()>>31) ? "ASYNC" : "SYNC ", |
287 | #else | 340 | #else /* as3525v2 */ |
288 | lcd_putsf(0, line++, "926ejs: %3dMHz", | 341 | lcd_putsf(x, line++, "926ejs: %3dMHz", |
289 | #endif | 342 | #endif |
290 | calc_freq(CLK_PROC)/1000000); | 343 | calc_freq(CLK_PROC)/D_MHZ); |
291 | lcd_putsf(0, line++, "PLLA:%3dMHz %3dMHz", AS3525_PLLA_FREQ/1000000, | 344 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "PLLA", AS3525_PLLA_FREQ/D_MHZ, |
292 | calc_freq(CLK_PLLA)/1000000); | 345 | calc_freq(CLK_PLLA)/D_MHZ); |
293 | lcd_putsf(0, line++, "PLLB: %3dMHz", calc_freq(CLK_PLLB)/1000000); | 346 | lcd_putsf(x, line++, "PLLB: %3dMHz", calc_freq(CLK_PLLB)/D_MHZ); |
294 | lcd_putsf(0, line++, "FCLK: %3dMHz", calc_freq(CLK_FCLK)/1000000); | 347 | lcd_putsf(x, line++, "FCLK: %3dMHz", calc_freq(CLK_FCLK)/D_MHZ); |
295 | lcd_putsf(0, line++, "DRAM:%3dMHz %3dMHz", AS3525_PCLK_FREQ/1000000, | 348 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "DRAM", AS3525_PCLK_FREQ/D_MHZ, |
296 | calc_freq(CLK_EXTMEM)/1000000); | 349 | calc_freq(CLK_EXTMEM)/D_MHZ); |
297 | lcd_putsf(0, line++, "PCLK:%3dMHz %3dMHz", AS3525_PCLK_FREQ/1000000, | 350 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "PCLK", AS3525_PCLK_FREQ/D_MHZ, |
298 | calc_freq(CLK_PCLK)/1000000); | 351 | calc_freq(CLK_PCLK)/D_MHZ); |
299 | 352 | ||
300 | #if LCD_HEIGHT < 176 /* clip */ | 353 | #if LCD_HEIGHT < 176 /* clip */ |
301 | lcd_update(); | ||
302 | int btn = button_get_w_tmo(HZ/10); | ||
303 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
304 | goto end; | ||
305 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
306 | break; | ||
307 | } | 354 | } |
308 | while(1) | 355 | while(dbg_btn(&done, &x)) |
309 | { | 356 | { |
310 | lcd_clear_display(); | ||
311 | line = 0; | 357 | line = 0; |
312 | #endif /* LCD_HEIGHT < 176 */ | 358 | #endif /* LCD_HEIGHT < 176 */ |
313 | 359 | ||
314 | lcd_putsf(0, line++, "IDE :%3dMHz %3dMHz", AS3525_IDE_FREQ/1000000, | 360 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "IDE ", AS3525_IDE_FREQ/D_MHZ, |
315 | calc_freq(CLK_IDE)/1000000); | 361 | calc_freq(CLK_IDE)/D_MHZ); |
316 | lcd_putsf(0, line++, "DBOP:%3dMHz %3dMHz", AS3525_DBOP_FREQ/1000000, | 362 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "DBOP", AS3525_DBOP_FREQ/D_MHZ, |
317 | calc_freq(CLK_DBOP)/1000000); | 363 | calc_freq(CLK_DBOP)/D_MHZ); |
318 | lcd_putsf(0, line++, "I2C :%3dkHz %3dkHz", AS3525_I2C_FREQ/1000, | 364 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "I2C ", AS3525_I2C_FREQ/D_KHZ, |
319 | calc_freq(CLK_I2C)/1000); | 365 | calc_freq(CLK_I2C)/D_KHZ); |
320 | lcd_putsf(0, line++, "I2SI: %s %3dMHz", (CGU_AUDIO & (1<<23)) ? | 366 | lcd_putsf(x, line++, "I2SI: %s %3dMHz", (CGU_AUDIO & (1<<23)) ? |
321 | "on " : "off" , calc_freq(CLK_I2SI)/1000000); | 367 | "on " : "off" , calc_freq(CLK_I2SI)/D_MHZ); |
322 | lcd_putsf(0, line++, "I2SO: %s %3dMHz", (CGU_AUDIO & (1<<11)) ? | 368 | lcd_putsf(x, line++, "I2SO: %s %3dMHz", (CGU_AUDIO & (1<<11)) ? |
323 | "on " : "off", calc_freq(CLK_I2SO)/1000000); | 369 | "on " : "off", calc_freq(CLK_I2SO)/D_MHZ); |
324 | #if CONFIG_CPU == AS3525 | 370 | #if CONFIG_CPU == AS3525 |
325 | struct ams_sd_debug_info dbg; | 371 | struct ams_sd_debug_info dbg; |
326 | ams_sd_get_debug_info(&dbg); | 372 | ams_sd_get_debug_info(&dbg); |
327 | 373 | ||
328 | lcd_putsf(0, line++, "SD :%3dMHz %3dMHz", | 374 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "SD ", |
329 | ((AS3525_IDE_FREQ/ 1000000) / | 375 | ((AS3525_IDE_FREQ/ D_MHZ) / |
330 | ((dbg.mci_nand & MCI_CLOCK_BYPASS)? 1:(((dbg.mci_nand & 0xff)+1) * 2))), | 376 | ((dbg.mci_nand & MCI_CLOCK_BYPASS)? 1:(((dbg.mci_nand & 0xff)+1) * 2))), |
331 | calc_freq(CLK_SD_MCLK_NAND)/1000000); | 377 | calc_freq(CLK_SD_MCLK_NAND)/D_MHZ); |
332 | #ifdef HAVE_MULTIDRIVE | 378 | #ifdef HAVE_MULTIDRIVE |
333 | lcd_putsf(0, line++, "uSD :%3dMHz %3dMHz", | 379 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "uSD ", |
334 | ((AS3525_PCLK_FREQ/ 1000000) / | 380 | ((AS3525_PCLK_FREQ/ D_MHZ) / |
335 | ((dbg.mci_sd & MCI_CLOCK_BYPASS) ? 1: (((dbg.mci_sd & 0xff) + 1) * 2))), | 381 | ((dbg.mci_sd & MCI_CLOCK_BYPASS) ? 1: (((dbg.mci_sd & 0xff) + 1) * 2))), |
336 | calc_freq(CLK_SD_MCLK_MSD)/1000000); | 382 | calc_freq(CLK_SD_MCLK_MSD)/D_MHZ); |
337 | #endif | 383 | #endif |
384 | |||
385 | #else /*AS3525v2*/ | ||
386 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "SD ", AS3525_SDSLOT_FREQ/D_MHZ, | ||
387 | calc_freq(CLK_SD_SLOT)/D_MHZ); | ||
388 | long freq_ssp = calc_freq(CLK_SSP); | ||
389 | if (freq_ssp >= D_MHZ) | ||
390 | lcd_putsf(x, line++, "%s:%3dMHz %3dMHz", "SSP ", AS3525_SSP_FREQ/D_MHZ, | ||
391 | calc_freq(CLK_SSP)/D_MHZ); | ||
392 | else | ||
393 | lcd_putsf(x, line++, "SSP :%3dMHz %3dKHz", AS3525_SSP_FREQ/D_MHZ, | ||
394 | calc_freq(CLK_SSP)/D_KHZ); | ||
338 | #endif /* CONFIG_CPU == AS3525 */ | 395 | #endif /* CONFIG_CPU == AS3525 */ |
339 | lcd_putsf(0, line++, "USB : %3dMHz", calc_freq(CLK_USB)/1000000); | 396 | lcd_putsf(x, line++, "USB : %3dMHz", calc_freq(CLK_USB)/D_MHZ); |
340 | 397 | ||
341 | #if LCD_HEIGHT < 176 /* clip */ | 398 | #if LCD_HEIGHT < 176 /* clip */ |
342 | lcd_update(); | ||
343 | int btn = button_get_w_tmo(HZ/10); | ||
344 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
345 | goto end; | ||
346 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
347 | break; | ||
348 | } | 399 | } |
349 | while(1) | 400 | while(dbg_btn(&done, &x)) |
350 | { | 401 | { |
351 | lcd_clear_display(); | 402 | lcd_clear_display(); |
352 | line = 0; | 403 | line = 0; |
353 | #endif /* LCD_HEIGHT < 176 */ | 404 | #endif /* LCD_HEIGHT < 176 */ |
354 | 405 | ||
355 | lcd_putsf(0, line++, "MMU : %s CVDDP:%4d", (read_cp15() & CP15_MMU) ? | 406 | lcd_putsf(x, line++, "MMU : %s CVDDP:%4d", (read_cp15() & CP15_MMU) ? |
356 | " on" : "off", adc_read(ADC_CVDD) * 25); | 407 | " on" : "off", adc_read(ADC_CVDD) * 25); |
357 | lcd_putsf(0, line++, "Icache:%s Dcache:%s", | 408 | lcd_putsf(x, line++, "Icache:%s Dcache:%s", |
358 | (read_cp15() & CP15_IC) ? " on" : "off", | 409 | (read_cp15() & CP15_IC) ? " on" : "off", |
359 | (read_cp15() & CP15_DC) ? " on" : "off"); | 410 | (read_cp15() & CP15_DC) ? " on" : "off"); |
360 | |||
361 | lcd_update(); | ||
362 | int btn = button_get_w_tmo(HZ/10); | ||
363 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
364 | goto end; | ||
365 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
366 | break; | ||
367 | } | 411 | } |
368 | while(1) | 412 | while(dbg_btn(&done, &x)) |
369 | { | 413 | { |
370 | lcd_clear_display(); | ||
371 | line = 0; | 414 | line = 0; |
372 | 415 | ||
373 | lcd_putsf(0, line++, "CGU_PLLA :%8x", (unsigned int)(CGU_PLLA)); | 416 | lcd_putsf(x, line++, "CGU_PLLA :%8x", (unsigned int)(CGU_PLLA)); |
374 | lcd_putsf(0, line++, "CGU_PLLB :%8x", (unsigned int)(CGU_PLLB)); | 417 | lcd_putsf(x, line++, "CGU_PLLB :%8x", (unsigned int)(CGU_PLLB)); |
375 | lcd_putsf(0, line++, "CGU_PROC :%8x", (unsigned int)(CGU_PROC)); | 418 | lcd_putsf(x, line++, "CGU_PROC :%8x", (unsigned int)(CGU_PROC)); |
376 | lcd_putsf(0, line++, "CGU_PERI :%8x", (unsigned int)(CGU_PERI)); | 419 | lcd_putsf(x, line++, "CGU_PERI :%8x", (unsigned int)(CGU_PERI)); |
377 | lcd_putsf(0, line++, "CGU_IDE :%8x", (unsigned int)(CGU_IDE)); | 420 | lcd_putsf(x, line++, "CGU_IDE :%8x", (unsigned int)(CGU_IDE)); |
378 | lcd_putsf(0, line++, "CGU_DBOP :%8x", (unsigned int)(CGU_DBOP)); | 421 | lcd_putsf(x, line++, "CGU_DBOP :%8x", (unsigned int)(CGU_DBOP)); |
379 | lcd_putsf(0, line++, "CGU_AUDIO :%8x", (unsigned int)(CGU_AUDIO)); | 422 | lcd_putsf(x, line++, "CGU_AUDIO :%8x", (unsigned int)(CGU_AUDIO)); |
380 | lcd_putsf(0, line++, "CGU_USB :%8x", (unsigned int)(CGU_USB)); | 423 | lcd_putsf(x, line++, "CGU_USB :%8x", (unsigned int)(CGU_USB)); |
381 | 424 | ||
382 | #if LCD_HEIGHT < 176 /* clip */ | 425 | #if LCD_HEIGHT < 176 /* clip */ |
383 | lcd_update(); | ||
384 | int btn = button_get_w_tmo(HZ/10); | ||
385 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
386 | goto end; | ||
387 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
388 | break; | ||
389 | } | 426 | } |
390 | while(1) | 427 | while(dbg_btn(&done, &x)) |
391 | { | 428 | { |
392 | lcd_clear_display(); | ||
393 | line = 0; | 429 | line = 0; |
394 | #endif /* LCD_HEIGHT < 176 */ | 430 | #endif /* LCD_HEIGHT < 176 */ |
431 | |||
395 | unsigned int i2c_cpsr; | 432 | unsigned int i2c_cpsr; |
396 | ams_i2c_get_debug_cpsr(&i2c_cpsr); | 433 | ams_i2c_get_debug_cpsr(&i2c_cpsr); |
397 | lcd_putsf(0, line++, "I2C2_CPSR :%8x", i2c_cpsr); | 434 | lcd_putsf(x, line++, "I2C2_CPSR :%8x", i2c_cpsr); |
398 | #if CONFIG_CPU == AS3525 | 435 | #if CONFIG_CPU == AS3525 |
399 | lcd_putsf(0, line++, "MCI_NAND :%8x", (unsigned int)(MCI_NAND)); | 436 | lcd_putsf(x, line++, "MCI_NAND :%8x", (unsigned int)(MCI_NAND)); |
400 | lcd_putsf(0, line++, "MCI_SD :%8x", (unsigned int)(MCI_SD)); | 437 | lcd_putsf(x, line++, "MCI_SD :%8x", (unsigned int)(MCI_SD)); |
401 | #else | 438 | #else /* as3525v2 */ |
402 | lcd_putsf(0, line++, "CGU_MEMSTK:%8x", (unsigned int)(CGU_MEMSTICK)); | 439 | lcd_putsf(x, line++, "CGU_MEMSTK:%8x", (unsigned int)(CGU_MEMSTICK)); |
403 | lcd_putsf(0, line++, "CGU_SDSLOT:%8x", (unsigned int)(CGU_SDSLOT)); | 440 | lcd_putsf(x, line++, "CGU_SDSLOT:%8x", (unsigned int)(CGU_SDSLOT)); |
404 | #endif | 441 | #endif |
405 | 442 | lcd_putsf(x, line++, "SSP_CPSR :%8x", (unsigned int)(SSP_CPSR)); | |
406 | lcd_update(); | ||
407 | int btn = button_get_w_tmo(HZ/10); | ||
408 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
409 | goto end; | ||
410 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
411 | break; | ||
412 | } | 443 | } |
413 | } | 444 | } |
414 | 445 | ||
415 | end: | ||
416 | lcd_setfont(FONT_UI); | 446 | lcd_setfont(FONT_UI); |
417 | return false; | 447 | return false; |
418 | } | 448 | } |
@@ -429,38 +459,29 @@ void adc_set_voltage_mux(int channel) | |||
429 | 459 | ||
430 | bool dbg_ports(void) | 460 | bool dbg_ports(void) |
431 | { | 461 | { |
432 | int line, btn, i; | 462 | int line, i; |
433 | 463 | int x = 0; | |
464 | bool done = false; | ||
465 | lcd_clear_display(); | ||
434 | lcd_setfont(FONT_SYSFIXED); | 466 | lcd_setfont(FONT_SYSFIXED); |
435 | 467 | ||
436 | while(1) | 468 | while(!done) |
437 | { | 469 | { |
438 | lcd_clear_display(); | 470 | while(dbg_btn(&done, &x)) |
439 | |||
440 | while(1) | ||
441 | { | 471 | { |
442 | line = 0; | 472 | line = 0; |
443 | lcd_puts(0, line++, "[GPIO Vals and Dirs]"); | 473 | lcd_puts(x, line++, "[GPIO Vals and Dirs]"); |
444 | lcd_putsf(0, line++, "GPIOA: %2x DIR: %2x", GPIOA_DATA, GPIOA_DIR); | 474 | lcd_putsf(x, line++, "%s: %2x DIR: %2x", "GPIOA", GPIOA_DATA, GPIOA_DIR); |
445 | lcd_putsf(0, line++, "GPIOB: %2x DIR: %2x", GPIOB_DATA, GPIOB_DIR); | 475 | lcd_putsf(x, line++, "%s: %2x DIR: %2x", "GPIOB", GPIOB_DATA, GPIOB_DIR); |
446 | lcd_putsf(0, line++, "GPIOC: %2x DIR: %2x", GPIOC_DATA, GPIOC_DIR); | 476 | lcd_putsf(x, line++, "%s: %2x DIR: %2x", "GPIOC", GPIOC_DATA, GPIOC_DIR); |
447 | lcd_putsf(0, line++, "GPIOD: %2x DIR: %2x", GPIOD_DATA, GPIOD_DIR); | 477 | lcd_putsf(x, line++, "%s: %2x DIR: %2x", "GPIOD", GPIOD_DATA, GPIOD_DIR); |
448 | lcd_putsf(0, line++, "CCU_IO:%8x", CCU_IO); | 478 | lcd_putsf(x, line++, "CCU_IO:%8x", CCU_IO); |
449 | #ifdef DEBUG_DBOP | 479 | #ifdef DEBUG_DBOP |
450 | lcd_puts(0, line++, "[DBOP_DIN]"); | 480 | lcd_puts(x, line++, "[DBOP_DIN]"); |
451 | lcd_putsf(0, line++, "DBOP_DIN: %4x", dbop_debug()); | 481 | lcd_putsf(x, line++, "DBOP_DIN: %4x", dbop_debug()); |
452 | #endif | 482 | #endif |
453 | lcd_puts(0, line++, "[CP15]"); | 483 | lcd_puts(x, line++, "[CP15]"); |
454 | lcd_putsf(0, line++, "CP15: 0x%8x", read_cp15()); | 484 | lcd_putsf(x, line++, "CP15: 0x%8x", read_cp15()); |
455 | lcd_update(); | ||
456 | if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL)) | ||
457 | break; | ||
458 | |||
459 | btn = button_get_w_tmo(HZ/10); | ||
460 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
461 | goto end; | ||
462 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
463 | break; | ||
464 | } | 485 | } |
465 | 486 | ||
466 | #if CONFIG_CPU == AS3525 /* as3525v2 channels are different */ | 487 | #if CONFIG_CPU == AS3525 /* as3525v2 channels are different */ |
@@ -516,72 +537,47 @@ bool dbg_ports(void) | |||
516 | #endif | 537 | #endif |
517 | 538 | ||
518 | lcd_clear_display(); | 539 | lcd_clear_display(); |
519 | while(1) | 540 | while(dbg_btn(&done, &x)) |
520 | { | 541 | { |
521 | line = 0; | 542 | line = 0; |
522 | 543 | ||
523 | for(i=0; i<5; i++) | 544 | for(i=0; i<5; i++) |
524 | lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i) * 5); | 545 | lcd_putsf(x, line++, "%s: %d mV", adc_name[i], adc_read(i) * 5); |
525 | for(; i<8; i++) | 546 | for(; i<8; i++) |
526 | if(adc_name[i]) | 547 | if(adc_name[i]) |
527 | lcd_putsf(0, line++, "%s: %d mV", adc_name[i], | 548 | lcd_putsf(x, line++, "%s: %d mV", adc_name[i], |
528 | adc_read(i) * BATTEMP_UNIT); | 549 | adc_read(i) * BATTEMP_UNIT); |
529 | #if LCD_HEIGHT < 176 /* clip */ | 550 | #if LCD_HEIGHT < 176 /* clip */ |
530 | lcd_update(); | ||
531 | |||
532 | btn = button_get_w_tmo(HZ/10); | ||
533 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
534 | goto end; | ||
535 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
536 | break; | ||
537 | } | 551 | } |
538 | lcd_clear_display(); | 552 | while(dbg_btn(&done, &x)) |
539 | while(1) | ||
540 | { | 553 | { |
541 | line = 0; | 554 | line = 0; |
542 | #endif /* LCD_HEIGHT < 176 */ | 555 | #endif /* LCD_HEIGHT < 176 */ |
543 | for(i=8; i<10; i++) | 556 | for(i=8; i<10; i++) |
544 | if(adc_name[i]) | 557 | if(adc_name[i]) |
545 | lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i)); | 558 | lcd_putsf(x, line++, "%s: %d mV", adc_name[i], adc_read(i)); |
546 | for(; i<12; i++) | 559 | for(; i<12; i++) |
547 | if(adc_name[i]) | 560 | if(adc_name[i]) |
548 | lcd_putsf(0, line++, "%s: %d uA", adc_name[i], adc_read(i)); | 561 | lcd_putsf(x, line++, "%s: %d uA", adc_name[i], adc_read(i)); |
549 | #if CONFIG_CPU == AS3525 /* different units */ | 562 | #if CONFIG_CPU == AS3525 /* different units */ |
550 | lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i)*5/2); | 563 | lcd_putsf(x, line++, "%s: %d mV", adc_name[i], adc_read(i)*5/2); |
551 | #elif CONFIG_CPU == AS3525v2 | 564 | #elif CONFIG_CPU == AS3525v2 |
552 | for(; i<16; i++) | 565 | for(; i<16; i++) |
553 | lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i)); | 566 | lcd_putsf(x, line++, "%s: %d mV", adc_name[i], adc_read(i)); |
554 | #endif | 567 | #endif |
555 | |||
556 | lcd_update(); | ||
557 | |||
558 | btn = button_get_w_tmo(HZ/10); | ||
559 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
560 | goto end; | ||
561 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
562 | break; | ||
563 | } | 568 | } |
564 | #if CONFIG_CPU == AS3525v2 /*extend AS3543 voltage registers*/ | 569 | #if CONFIG_CPU == AS3525v2 /*extend AS3543 voltage registers*/ |
565 | lcd_clear_display(); | 570 | while(dbg_btn(&done, &x)) |
566 | while(1) | ||
567 | { | 571 | { |
568 | line = 0; | 572 | line = 0; |
569 | for(i=1; i<9; i++){ | 573 | for(i=1; i<9; i++){ |
570 | adc_set_voltage_mux(i); /*change the voltage mux to a new channel*/ | 574 | adc_set_voltage_mux(i); /*change the voltage mux to a new channel*/ |
571 | lcd_putsf(0, line++, "%s: %d mV", adc_mux_name[i], adc_read(5) * 5); | 575 | lcd_putsf(x, line++, "%s: %d mV", adc_mux_name[i], adc_read(5) * 5); |
572 | } | 576 | } |
573 | lcd_update(); | ||
574 | |||
575 | btn = button_get_w_tmo(HZ/10); | ||
576 | if(btn == (DEBUG_CANCEL|BUTTON_REL)) | ||
577 | goto end; | ||
578 | else if(btn == (BUTTON_DOWN|BUTTON_REL)) | ||
579 | break; | ||
580 | } | 577 | } |
581 | #endif | 578 | #endif |
582 | } | 579 | } |
583 | 580 | ||
584 | end: | ||
585 | lcd_setfont(FONT_UI); | 581 | lcd_setfont(FONT_UI); |
586 | return false; | 582 | return false; |
587 | } | 583 | } |
@@ -614,4 +610,4 @@ int get_cpu_voltage_setting(void) | |||
614 | 610 | ||
615 | return value; | 611 | return value; |
616 | } | 612 | } |
617 | #endif /* HAVE_ADJUSTABLE_CPU_VOLTAGE */ | 613 | #endif /* HAVE_ADJUSTABLE_CPU_VOLTAGE */ \ No newline at end of file |