diff options
Diffstat (limited to 'firmware/export')
-rwxr-xr-x | firmware/export/config-hdd1630.h | 189 | ||||
-rw-r--r-- | firmware/export/config.h | 4 | ||||
-rw-r--r-- | firmware/export/usb.h | 3 |
3 files changed, 196 insertions, 0 deletions
diff --git a/firmware/export/config-hdd1630.h b/firmware/export/config-hdd1630.h new file mode 100755 index 0000000000..19ca190a57 --- /dev/null +++ b/firmware/export/config-hdd1630.h | |||
@@ -0,0 +1,189 @@ | |||
1 | /* | ||
2 | * This config file is for the iriver H10 20Gb | ||
3 | */ | ||
4 | |||
5 | #define TARGET_TREE /* this target is using the target tree system */ | ||
6 | |||
7 | /* For Rolo and boot loader */ | ||
8 | #define MODEL_NUMBER 31 | ||
9 | #define MODEL_NAME "Philips GoGear HDD1630" | ||
10 | |||
11 | /* define this if you use an ATA controller */ | ||
12 | #define HAVE_ATA | ||
13 | |||
14 | /* define this if you have recording possibility */ | ||
15 | /* #define HAVE_RECORDING */ | ||
16 | |||
17 | /* Define bitmask of input sources - recordable bitmask can be defined | ||
18 | explicitly if different */ | ||
19 | #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) | ||
20 | |||
21 | /* define the bitmask of hardware sample rates */ | ||
22 | #define HW_SAMPR_CAPS (SAMPR_CAP_44) | ||
23 | |||
24 | /* define the bitmask of recording sample rates */ | ||
25 | #define REC_SAMPR_CAPS (SAMPR_CAP_44) | ||
26 | |||
27 | /* define this if you have a bitmap LCD display */ | ||
28 | #define HAVE_LCD_BITMAP | ||
29 | |||
30 | /* define this if you have a colour LCD */ | ||
31 | #define HAVE_LCD_COLOR | ||
32 | |||
33 | /* define this if you want album art for this target */ | ||
34 | #define HAVE_ALBUMART | ||
35 | |||
36 | /* define this if you have access to the quickscreen */ | ||
37 | #define HAVE_QUICKSCREEN | ||
38 | |||
39 | /* define this if you have access to the pitchscreen */ | ||
40 | #define HAVE_PITCHSCREEN | ||
41 | |||
42 | /* define this if you would like tagcache to build on this target */ | ||
43 | #define HAVE_TAGCACHE | ||
44 | |||
45 | /* LCD dimensions */ | ||
46 | #define LCD_WIDTH 128 | ||
47 | #define LCD_HEIGHT 128 | ||
48 | #define LCD_DEPTH 16 /* 65536 colours */ | ||
49 | #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */ | ||
50 | |||
51 | #ifndef BOOTLOADER | ||
52 | /* Define this if your LCD can be enabled/disabled */ | ||
53 | /* #define HAVE_LCD_ENABLE */ | ||
54 | |||
55 | /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE | ||
56 | * should be defined as well. | ||
57 | * We can currently put the lcd to sleep but it won't wake up properly */ | ||
58 | /* #define HAVE_LCD_SLEEP */ | ||
59 | /* #define HAVE_LCD_SLEEP_SETTING */ | ||
60 | #endif | ||
61 | |||
62 | /* define this if you can flip your LCD */ | ||
63 | /* #define HAVE_LCD_FLIP */ | ||
64 | |||
65 | /* define this if you can invert the colours on your LCD */ | ||
66 | /* #define HAVE_LCD_INVERT */ | ||
67 | |||
68 | /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ | ||
69 | |||
70 | #define CONFIG_KEYPAD PHILIPS_HDD1630_PAD | ||
71 | |||
72 | /* Define this if you do software codec */ | ||
73 | #define CONFIG_CODEC SWCODEC | ||
74 | |||
75 | /* define this if you have a real-time clock */ | ||
76 | #ifndef BOOTLOADER | ||
77 | /* #define CONFIG_RTC RTC_E8564 */ | ||
78 | /* #define HAVE_RTC_ALARM */ | ||
79 | #endif | ||
80 | |||
81 | /* Define this if you have a software controlled poweroff */ | ||
82 | /* #define HAVE_SW_POWEROFF */ | ||
83 | |||
84 | /* The number of bytes reserved for loadable codecs */ | ||
85 | #define CODEC_SIZE 0x80000 | ||
86 | |||
87 | /* The number of bytes reserved for loadable plugins */ | ||
88 | #define PLUGIN_BUFFER_SIZE 0x80000 | ||
89 | |||
90 | /* Define this if you have the WM8731 audio codec */ | ||
91 | #define HAVE_WM8731 | ||
92 | |||
93 | /* WM8731 has no tone controls, so we use the software ones */ | ||
94 | #define HAVE_SW_TONE_CONTROLS | ||
95 | |||
96 | #define AB_REPEAT_ENABLE 1 | ||
97 | |||
98 | /* FM Tuner */ | ||
99 | /* #define CONFIG_TUNER TEA5767 */ | ||
100 | /* #define CONFIG_TUNER_XTAL 32768 */ | ||
101 | |||
102 | /* Define this for LCD backlight available */ | ||
103 | #define HAVE_BACKLIGHT | ||
104 | /* #define HAVE_BACKLIGHT_BRIGHTNESS */ | ||
105 | |||
106 | /* Main LCD backlight brightness range and defaults */ | ||
107 | #define MIN_BRIGHTNESS_SETTING 1 | ||
108 | #define MAX_BRIGHTNESS_SETTING 12 | ||
109 | #define DEFAULT_BRIGHTNESS_SETTING 6 | ||
110 | |||
111 | /* define this if you have a light associated with the buttons */ | ||
112 | /* #define HAVE_BUTTON_LIGHT */ | ||
113 | |||
114 | #define AB_REPEAT_ENABLE 1 | ||
115 | |||
116 | #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */ | ||
117 | #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ | ||
118 | #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ | ||
119 | #define BATTERY_CAPACITY_INC 50 /* capacity increment */ | ||
120 | #define BATTERY_TYPES_COUNT 1 /* only one type */ | ||
121 | |||
122 | /* Hardware controlled charging */ | ||
123 | /* #define CONFIG_CHARGING CHARGING_SIMPLE */ | ||
124 | |||
125 | /* define this if the unit can be powered or charged via USB */ | ||
126 | #define HAVE_USB_POWER | ||
127 | |||
128 | #ifndef SIMULATOR | ||
129 | |||
130 | /* Define this if you have a PortalPlayer PP5020 */ | ||
131 | #define CONFIG_CPU PP5022 | ||
132 | |||
133 | /* Define this if you want to use the PP5020 i2c interface */ | ||
134 | #define CONFIG_I2C I2C_PP5020 | ||
135 | |||
136 | /* define this if the hardware can be powered off while charging */ | ||
137 | #define HAVE_POWEROFF_WHILE_CHARGING | ||
138 | |||
139 | /* The start address index for ROM builds */ | ||
140 | #define ROM_START 0x00000000 | ||
141 | |||
142 | /* The size of the flash ROM */ | ||
143 | #define FLASH_SIZE 0x100000 | ||
144 | |||
145 | /* Define this to the CPU frequency */ | ||
146 | #define CPU_FREQ 75000000 | ||
147 | |||
148 | /* Type of LCD */ | ||
149 | #define CONFIG_LCD LCD_HDD1630 | ||
150 | |||
151 | /* Define this if your LCD can set contrast */ | ||
152 | #define HAVE_LCD_CONTRAST | ||
153 | |||
154 | #define MIN_CONTRAST_SETTING 0 | ||
155 | #define MAX_CONTRAST_SETTING 30 | ||
156 | #define DEFAULT_CONTRAST_SETTING 14 /* Match boot contrast */ | ||
157 | |||
158 | /* We're able to shut off power to the HDD */ | ||
159 | /* #define HAVE_ATA_POWER_OFF */ | ||
160 | |||
161 | /* Offset ( in the firmware file's header ) to the file CRC and data. These are | ||
162 | only used when loading the old format rockbox.e200 file */ | ||
163 | #define FIRMWARE_OFFSET_FILE_CRC 0x0 | ||
164 | #define FIRMWARE_OFFSET_FILE_DATA 0x8 | ||
165 | |||
166 | /* #define USB_IPODSTYLE */ | ||
167 | |||
168 | /* USB On-the-go */ | ||
169 | #define CONFIG_USBOTG USBOTG_ARC | ||
170 | |||
171 | /* enable these for the experimental usb stack */ | ||
172 | #define HAVE_USBSTACK | ||
173 | #define USB_VENDOR_ID 0x0471 | ||
174 | #define USB_PRODUCT_ID 0x014C | ||
175 | |||
176 | /* Virtual LED (icon) */ | ||
177 | #define CONFIG_LED LED_VIRTUAL | ||
178 | |||
179 | /* Define this if you have adjustable CPU frequency */ | ||
180 | #define HAVE_ADJUSTABLE_CPU_FREQ | ||
181 | |||
182 | #define MI4_FORMAT | ||
183 | #define BOOTFILE_EXT "mi4" | ||
184 | #define BOOTFILE "rockbox." BOOTFILE_EXT | ||
185 | #define BOOTDIR "/.rockbox" | ||
186 | |||
187 | #define ICODE_ATTR_TREMOR_NOT_MDCT | ||
188 | |||
189 | #endif | ||
diff --git a/firmware/export/config.h b/firmware/export/config.h index 34d0bf27c6..1a6e5d6894 100644 --- a/firmware/export/config.h +++ b/firmware/export/config.h | |||
@@ -85,6 +85,7 @@ | |||
85 | #define CREATIVEZV_PAD 26 | 85 | #define CREATIVEZV_PAD 26 |
86 | #define PHILIPS_SA9200_PAD 27 | 86 | #define PHILIPS_SA9200_PAD 27 |
87 | #define SANSA_C100_PAD 28 | 87 | #define SANSA_C100_PAD 28 |
88 | #define PHILIPS_HDD1630_PAD 29 | ||
88 | 89 | ||
89 | /* CONFIG_REMOTE_KEYPAD */ | 90 | /* CONFIG_REMOTE_KEYPAD */ |
90 | #define H100_REMOTE 1 | 91 | #define H100_REMOTE 1 |
@@ -125,6 +126,7 @@ | |||
125 | #define LCD_COWOND2 24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */ | 126 | #define LCD_COWOND2 24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */ |
126 | #define LCD_SA9200 25 /* as used by the Philips SA9200 */ | 127 | #define LCD_SA9200 25 /* as used by the Philips SA9200 */ |
127 | #define LCD_S6B33B2 26 /* as used by the Sansa c100 */ | 128 | #define LCD_S6B33B2 26 /* as used by the Sansa c100 */ |
129 | #define LCD_HDD1630 27 /* as used by the Philips HDD1630 */ | ||
128 | 130 | ||
129 | /* LCD_PIXELFORMAT */ | 131 | /* LCD_PIXELFORMAT */ |
130 | #define HORIZONTAL_PACKING 1 | 132 | #define HORIZONTAL_PACKING 1 |
@@ -265,6 +267,8 @@ | |||
265 | #include "config-creativezv.h" | 267 | #include "config-creativezv.h" |
266 | #elif defined(PHILIPS_SA9200) | 268 | #elif defined(PHILIPS_SA9200) |
267 | #include "config-sa9200.h" | 269 | #include "config-sa9200.h" |
270 | #elif defined(PHILIPS_HDD1630) | ||
271 | #include "config-hdd1630.h" | ||
268 | #elif defined(SANSA_C100) | 272 | #elif defined(SANSA_C100) |
269 | #include "config-c100.h" | 273 | #include "config-c100.h" |
270 | #else | 274 | #else |
diff --git a/firmware/export/usb.h b/firmware/export/usb.h index 0590f702c5..05ea84148a 100644 --- a/firmware/export/usb.h +++ b/firmware/export/usb.h | |||
@@ -64,6 +64,9 @@ enum { | |||
64 | (CONFIG_KEYPAD == PHILIPS_SA9200_PAD) | 64 | (CONFIG_KEYPAD == PHILIPS_SA9200_PAD) |
65 | #define USBPOWER_BUTTON BUTTON_SELECT | 65 | #define USBPOWER_BUTTON BUTTON_SELECT |
66 | #define USBPOWER_BTN_IGNORE BUTTON_POWER | 66 | #define USBPOWER_BTN_IGNORE BUTTON_POWER |
67 | #elif CONFIG_KEYPAD == PHILIPS_HDD1630_PAD | ||
68 | #define USBPOWER_BUTTON BUTTON_PLAYLIST | ||
69 | #define USBPOWER_BTN_IGNORE BUTTON_POWER | ||
67 | #endif | 70 | #endif |
68 | #endif /* HAVE_USB_POWER */ | 71 | #endif /* HAVE_USB_POWER */ |
69 | 72 | ||