1 files changed, 0 insertions, 151 deletions
diff --git a/firmware/export/config/tatungtpj1022.h b/firmware/export/config/tatungtpj1022.h
deleted file mode 100644
index 3865e8f87f..0000000000
--- a/firmware/export/config/tatungtpj1022.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * This config file is for the Tatung Elio TPJ-1022
- */
-#define MODEL_NAME "Tatung Elio TPJ-1022"
-/* For Rolo and boot loader */
-#define MODEL_NUMBER 15
-/* define this if you use an ATA controller */
-#define CONFIG_STORAGE STORAGE_ATA
-/*define this if the ATA controller and method of USB access support LBA48 */
-#define HAVE_LBA48
-/* define this if you have recording possibility */
-/*#define HAVE_RECORDING*/ /* TODO: add support for this */
-/* define the bitmask of hardware sample rates */
-#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
-                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
-/* define the bitmask of recording sample rates
-#define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
-                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
-/* define this if you have a colour LCD */
-#define HAVE_LCD_COLOR
-/* define this if you have access to the quickscreen */
-#define HAVE_QUICKSCREEN
-/* LCD dimensions */
-#define LCD_WIDTH  220
-#define LCD_HEIGHT 176
-/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
-#define LCD_DPI 128
-#define LCD_DEPTH  16   /* 65536 colours */
-#define LCD_PIXELFORMAT RGB565 
-/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
-#define CONFIG_KEYPAD TATUNG_TPJ1022_PAD
-/* define this if you have a real-time clock */
-#ifndef BOOTLOADER
-//#define CONFIG_RTC RTC_E8564
-#endif
-/* Define this if you have a software controlled poweroff */
-#define HAVE_SW_POWEROFF
-/* The number of bytes reserved for loadable codecs */
-#define CODEC_SIZE 0x100000
-/* The number of bytes reserved for loadable plugins */
-#define PLUGIN_BUFFER_SIZE 0x80000
-/* Define this if you have the WM8731 audio codec */
-#define HAVE_WM8731
-#define AB_REPEAT_ENABLE
-/* define this if you have a disk storage, i.e. something
-   that needs spinups and can cause skips when shaked */
-#define HAVE_DISK_STORAGE
-/* Define this for LCD backlight available */
-#define HAVE_BACKLIGHT
-#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
-                                        TODO: check this, probably different
-                                        for different models too */
-#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
-#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
-#define BATTERY_CAPACITY_INC 10   /* capacity increment */
-#define BATTERY_TYPES_COUNT  1    /* only one type */
-#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
-/* Hardware controlled charging? FIXME */
-#define CONFIG_CHARGING CHARGING_SIMPLE
-/* define this if the unit can be powered or charged via USB */
-/*#define HAVE_USB_POWER*/
-/* Define this if you have a PortalPlayer PP5020 */
-#define CONFIG_CPU PP5020
-/* Define this if you want to use the PP5020 i2c interface */
-#define CONFIG_I2C I2C_PP5020
-/* define this if the hardware can be powered off while charging */
-/* TODO: should this be set for the H10? */
-//#define HAVE_POWEROFF_WHILE_CHARGING
-/* The start address index for ROM builds */
-#define ROM_START 0x00000000
-/* Define this to the CPU frequency */
-/* TODO: this is probably wrong */
-#define CPU_FREQ      11289600
-/* Type of LCD */
-#define CONFIG_LCD LCD_TPJ1022
-#define DEFAULT_CONTRAST_SETTING    19
-/* Offset ( in the firmware file's header ) to the file length */
-#define FIRMWARE_OFFSET_FILE_LENGTH 0
-/* Offset ( in the firmware file's header ) to the file CRC */
-#define FIRMWARE_OFFSET_FILE_CRC 0
-/* Offset ( in the firmware file's header ) to the real data */
-#define FIRMWARE_OFFSET_FILE_DATA 8
-/* USB On-the-go */
-#define CONFIG_USBOTG USBOTG_ARC
-/* define this if the unit can be powered or charged via USB */
-#define HAVE_USB_POWER
-/* enable these for the experimental usb stack ROOLKU */
-#define HAVE_USBSTACK
-#define USB_VENDOR_ID 0x07B4
-#define USB_PRODUCT_ID 0x0280
-/* Define this if you have adjustable CPU frequency */
-#define HAVE_ADJUSTABLE_CPU_FREQ
-#define BOOTFILE_EXT "elio"
-#define BOOTFILE "rockbox." BOOTFILE_EXT
-#define BOOTDIR "/.rockbox"
-/* DMA is used only for reading on PP502x because although reads are ~8x faster
- * writes appear to be ~25% slower.
- */
-#ifndef BOOTLOADER
-#define HAVE_ATA_DMA
-#endif
-/* Define this if a programmable hotkey is mapped */
-//#define HAVE_HOTKEY

diff --git a/firmware/export/config/tatungtpj1022.h b/firmware/export/config/tatungtpj1022.h deleted file mode 100644 index 3865e8f87f..0000000000 --- a/firmware/export/config/tatungtpj1022.h +++ /dev/null
@@ -1,151 +0,0 @@
1	/*
2	* This config file is for the Tatung Elio TPJ-1022
3	*/
4
5	#define MODEL_NAME "Tatung Elio TPJ-1022"
6
7	/* For Rolo and boot loader */
8	#define MODEL_NUMBER 15
9
10	/* define this if you use an ATA controller */
11	#define CONFIG_STORAGE STORAGE_ATA
12
13	/define this if the ATA controller and method of USB access support LBA48 /
14	#define HAVE_LBA48
15
16	/* define this if you have recording possibility */
17	/#define HAVE_RECORDING/ /* TODO: add support for this */
18
19	/* define the bitmask of hardware sample rates */
20	#define HW_SAMPR_CAPS (SAMPR_CAP_96 \| SAMPR_CAP_88 \| SAMPR_CAP_48 \| \
21	SAMPR_CAP_44 \| SAMPR_CAP_32 \| SAMPR_CAP_8)
22
23	/* define the bitmask of recording sample rates
24	#define REC_SAMPR_CAPS (SAMPR_CAP_96 \| SAMPR_CAP_88 \| SAMPR_CAP_48 \| \
25	SAMPR_CAP_44 \| SAMPR_CAP_32 \| SAMPR_CAP_8) */
26
27
28
29
30	/* define this if you have a colour LCD */
31	#define HAVE_LCD_COLOR
32
33	/* define this if you have access to the quickscreen */
34	#define HAVE_QUICKSCREEN
35
36	/* LCD dimensions */
37	#define LCD_WIDTH 220
38	#define LCD_HEIGHT 176
39	/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
40	#define LCD_DPI 128
41	#define LCD_DEPTH 16 /* 65536 colours */
42	#define LCD_PIXELFORMAT RGB565
43
44	/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR // put the lcd frame buffer in IRAM */
45
46	#define CONFIG_KEYPAD TATUNG_TPJ1022_PAD
47
48
49
50
51	/* define this if you have a real-time clock */
52	#ifndef BOOTLOADER
53	//#define CONFIG_RTC RTC_E8564
54	#endif
55
56	/* Define this if you have a software controlled poweroff */
57	#define HAVE_SW_POWEROFF
58
59	/* The number of bytes reserved for loadable codecs */
60	#define CODEC_SIZE 0x100000
61
62	/* The number of bytes reserved for loadable plugins */
63	#define PLUGIN_BUFFER_SIZE 0x80000
64
65	/* Define this if you have the WM8731 audio codec */
66	#define HAVE_WM8731
67
68	#define AB_REPEAT_ENABLE
69
70	/* define this if you have a disk storage, i.e. something
71	that needs spinups and can cause skips when shaked */
72	#define HAVE_DISK_STORAGE
73
74	/* Define this for LCD backlight available */
75	#define HAVE_BACKLIGHT
76
77	#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
78	TODO: check this, probably different
79	for different models too */
80	#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
81	#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
82	#define BATTERY_CAPACITY_INC 10 /* capacity increment */
83	#define BATTERY_TYPES_COUNT 1 /* only one type */
84
85	#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
86
87	/* Hardware controlled charging? FIXME */
88	#define CONFIG_CHARGING CHARGING_SIMPLE
89
90	/* define this if the unit can be powered or charged via USB */
91	/#define HAVE_USB_POWER/
92
93	/* Define this if you have a PortalPlayer PP5020 */
94	#define CONFIG_CPU PP5020
95
96	/* Define this if you want to use the PP5020 i2c interface */
97	#define CONFIG_I2C I2C_PP5020
98
99	/* define this if the hardware can be powered off while charging */
100	/* TODO: should this be set for the H10? */
101	//#define HAVE_POWEROFF_WHILE_CHARGING
102
103	/* The start address index for ROM builds */
104	#define ROM_START 0x00000000
105
106	/* Define this to the CPU frequency */
107	/* TODO: this is probably wrong */
108	#define CPU_FREQ 11289600
109
110	/* Type of LCD */
111	#define CONFIG_LCD LCD_TPJ1022
112
113	#define DEFAULT_CONTRAST_SETTING 19
114
115	/* Offset ( in the firmware file's header ) to the file length */
116	#define FIRMWARE_OFFSET_FILE_LENGTH 0
117
118	/* Offset ( in the firmware file's header ) to the file CRC */
119	#define FIRMWARE_OFFSET_FILE_CRC 0
120
121	/* Offset ( in the firmware file's header ) to the real data */
122	#define FIRMWARE_OFFSET_FILE_DATA 8
123
124	/* USB On-the-go */
125	#define CONFIG_USBOTG USBOTG_ARC
126
127	/* define this if the unit can be powered or charged via USB */
128	#define HAVE_USB_POWER
129
130	/* enable these for the experimental usb stack ROOLKU */
131	#define HAVE_USBSTACK
132	#define USB_VENDOR_ID 0x07B4
133	#define USB_PRODUCT_ID 0x0280
134
135	/* Define this if you have adjustable CPU frequency */
136	#define HAVE_ADJUSTABLE_CPU_FREQ
137
138	#define BOOTFILE_EXT "elio"
139	#define BOOTFILE "rockbox." BOOTFILE_EXT
140	#define BOOTDIR "/.rockbox"
141
142
143	/* DMA is used only for reading on PP502x because although reads are ~8x faster
144	* writes appear to be ~25% slower.
145	*/
146	#ifndef BOOTLOADER
147	#define HAVE_ATA_DMA
148	#endif
149
150	/* Define this if a programmable hotkey is mapped */
151	//#define HAVE_HOTKEY