1 files changed, 220 insertions, 0 deletions

diff --git a/firmware/export/config/ondavx747.h b/firmware/export/config/ondavx747.h
new file mode 100644
index 0000000000..dee18663d1
--- /dev/null
+++ b/firmware/export/config/ondavx747.h
@@ -0,0 +1,220 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the Onda VX747(+)/VX777
+ */
+
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define CONFIG_SDRAM_START 0x80004000
+
+#ifdef ONDA_VX747P
+#define MODEL_NAME  "Onda VX747+"
+#define MODEL_NUMBER 54
+/* Define something for camera interface... */
+#elif defined(ONDA_VX777)
+#define MODEL_NAME  "Onda VX777"
+#define MODEL_NUMBER 61
+#else
+#define MODEL_NAME  "Onda VX747"
+#define MODEL_NUMBER 45
+#endif
+
+/* Support FAT16 for SD cards <= 2GB */
+#define HAVE_FAT16SUPPORT
+
+/* ChinaChip NAND FTL */
+#define CONFIG_NAND NAND_CC
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+//#define HAVE_VOLUME_IN_LIST
+
+/* LCD dimensions */
+#define CONFIG_LCD LCD_ONDAVX747
+
+#ifdef BOOTLOADER /* OF requires landscape */
+#define LCD_WIDTH  400
+#define LCD_HEIGHT 240
+#else
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 400
+#endif
+
+#define LCD_DEPTH  16   /* 16bit colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+#ifdef ONDA_VX777
+#define CONFIG_KEYPAD ONDAVX777_PAD
+#else
+#define CONFIG_KEYPAD ONDAVX747_PAD
+#endif
+#define HAVE_TOUCHSCREEN
+#define HAVE_BUTTON_DATA
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_JZ47XX
+
+/* Tuner config */
+#define CONFIG_TUNER TEA5767
+#define CONFIG_TUNER_XTAL 32768
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Which backlight fading type? */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING          1
+#define MAX_BRIGHTNESS_SETTING          16
+#define DEFAULT_BRIGHTNESS_SETTING      16 /* "full brightness" */
+#define DEFAULT_DIMNESS_SETTING         1  /* "most dim" */
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x100000
+
+/* Define this if you have the Jz4740 internal codec */
+#define HAVE_JZ4740_CODEC
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
+
+/* has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+/* has no volume control, so we use the software ones */
+#ifndef SIMULATOR
+#define HAVE_SW_VOLUME_CONTROL
+#endif
+
+/* software controlled volume ranges from -73 -> 0 dB, other than that
+   is controlled by hardware */
+#define SW_VOLUME_MIN   -73
+#define SW_VOLUME_MAX   0
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
+                         SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
+                         SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
+
+#define CONFIG_I2C I2C_JZ47XX
+
+#define NEED_ADC_CLOSE 1
+
+#define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 500      /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2500     /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100      /* capacity increment */
+#define BATTERY_TYPES_COUNT  1        /* only one type */
+
+/* Hardware controlled charging with monitoring */
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+#define CFG_EXTAL 12000000    /* EXT clock: 12 Mhz */
+
+#ifndef SIMULATOR
+
+#define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
+#define NUM_DRIVES 2
+
+/* Define this if media can be exchanged on the fly */
+//#define HAVE_HOTSWAP
+
+/* Define this if you have a Ingenic JZ4732 */
+#define CONFIG_CPU JZ4732
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* Define this if you have a speaker */
+#define HAVE_SPEAKER
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 336000000    /* CPU clock: 336 MHz */
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC  0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#ifdef ONDA_VX747P
+#define BOOTFILE_EXT "vx747p"
+#elif defined(ONDA_VX777)
+#define BOOTFILE_EXT "vx777"
+#else
+#define BOOTFILE_EXT "vx747"
+#endif
+#define BOOTFILE     "rockbox." BOOTFILE_EXT
+#define BOOTDIR      "/.rockbox"
+
+#define CONFIG_USBOTG     USBOTG_JZ4740
+#define HAVE_USBSTACK
+#define USE_ROCKBOX_USB
+#define USB_VENDOR_ID     0x07C4
+#define USB_PRODUCT_ID    0xA4A5
+
+#endif