1 files changed, 258 insertions, 0 deletions

diff --git a/firmware/export/config/mrobe500.h b/firmware/export/config/mrobe500.h
new file mode 100644
index 0000000000..96e25c9247
--- /dev/null
+++ b/firmware/export/config/mrobe500.h
@@ -0,0 +1,258 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2007 by Karl Kurbjun
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the M:Robe 500i
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define CONFIG_SDRAM_START 0x00900000
+
+#define OLYMPUS_MROBE_500 1
+#define MODEL_NAME   "Olympus M:Robe 500i"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 22
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* Define this to add support for ATA DMA */
+//#define HAVE_ATA_DMA
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* define this if you want viewport clipping enabled for safe LCD functions */
+#define HAVE_VIEWPORT_CLIP
+
+/* LCD dimensions */
+#define CONFIG_LCD LCD_MROBE500
+
+/* These defines are used internal to this header */
+#define _LCD_RES_QVGA       1
+#define _LCD_RES_VGA        2
+#define _LCD_PORTRAIT       1
+#define _LCD_LANDSCAPE      2
+
+/* Setup the resolution and orientation */
+#define _RESOLUTION         _LCD_RES_VGA
+#define _ORIENTATION        _LCD_LANDSCAPE
+
+#if _RESOLUTION == _LCD_RES_VGA 
+#define LCD_NATIVE_WIDTH 480
+#define LCD_NATIVE_HEIGHT 640
+#else
+#define LCD_NATIVE_WIDTH 240
+#define LCD_NATIVE_HEIGHT 320
+#endif
+
+/* choose the lcd orientation. CONFIG_ORIENTATION defined in config.h */
+#if _ORIENTATION == _LCD_PORTRAIT
+/* This is the Portrait setup */
+#define LCD_WIDTH  LCD_NATIVE_WIDTH
+#define LCD_HEIGHT LCD_NATIVE_HEIGHT
+#else
+/* Frame buffer stride */
+#define LCD_STRIDEFORMAT    VERTICAL_STRIDE
+
+/* This is the Landscape setup */
+#define LCD_WIDTH  LCD_NATIVE_HEIGHT
+#define LCD_HEIGHT LCD_NATIVE_WIDTH
+#endif
+
+#define LCD_DEPTH  16   /* 65k colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+#define MAX_ICON_HEIGHT 35
+#define MAX_ICON_WIDTH 35
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+   should be defined as well. */
+#define HAVE_LCD_SLEEP
+#define HAVE_LCD_SLEEP_SETTING
+
+/* remote LCD */
+#define HAVE_REMOTE_LCD
+#define LCD_REMOTE_WIDTH  79
+#define LCD_REMOTE_HEIGHT 16
+#define LCD_REMOTE_DEPTH  1
+
+/* Remote display colours, for screenshots and sim (0xRRGGBB) */
+#define LCD_REMOTE_DARKCOLOR       0x000000
+#define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
+#define LCD_REMOTE_BL_DARKCOLOR    0x000000
+#define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
+
+#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
+
+#define CONFIG_REMOTE_KEYPAD MROBE_REMOTE
+
+#define MIN_REMOTE_CONTRAST_SETTING     0
+#define MAX_REMOTE_CONTRAST_SETTING     15
+#define DEFAULT_REMOTE_CONTRAST_SETTING 7
+
+#define CONFIG_KEYPAD MROBE500_PAD
+#define HAVE_TOUCHSCREEN
+#define HAVE_BUTTON_DATA
+
+/* Define this to enable morse code input */
+#define HAVE_MORSE_INPUT
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+//#define HAVE_HARDWARE_BEEP
+
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_RX5X348AB
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING          0
+#define MAX_BRIGHTNESS_SETTING          127
+#define DEFAULT_BRIGHTNESS_SETTING      85 /* OF "full brightness" */
+#define DEFAULT_DIMNESS_SETTING         22 /* OF "most dim" */
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#if LCD_NATIVE_WIDTH < 480
+#define PLUGIN_BUFFER_SIZE 0x100000
+#else
+/* THe larger screen needs larger bitmaps in plugins */
+#define PLUGIN_BUFFER_SIZE 0x200000
+#endif
+
+#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8
+
+#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 1000        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2000        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100         /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* define current usage levels */
+#define CURRENT_NORMAL     100 /* Measured */
+#define CURRENT_BACKLIGHT  100 /* Over 200 mA total measured when on */
+#define CURRENT_RECORD     0  /* no recording */
+
+/* Hardware controlled charging with monitoring */
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+/* Define this if you have a Texas Instruments TSC2100 touch screen */
+#define HAVE_TSC2100
+
+/* M66591 register base */
+#define M66591_BASE 0x60000000
+
+/* enable these for the usb stack */
+#define CONFIG_USBOTG       USBOTG_M66591
+#define USE_ROCKBOX_USB
+
+#define HAVE_USBSTACK
+//#define HAVE_USB_POWER
+//#define USBPOWER_BUTTON     BUTTON_POWER
+//#define USBPOWER_BTN_IGNORE BUTTON_TOUCH
+/* usb stack and driver settings */
+#define USB_NUM_ENDPOINTS   7
+#define USB_VENDOR_ID       0x07b4
+#define USB_PRODUCT_ID      0x0281
+#define HAVE_USB_HID_MOUSE
+
+/* Define this if hardware supports alternate blitting */
+#define HAVE_LCD_MODES LCD_MODE_RGB565 | LCD_MODE_YUV | LCD_MODE_PAL256
+
+#define CONFIG_CPU DM320
+
+#define CONFIG_I2C I2C_DM320
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x400000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 87500000
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT "mrobe500"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
+