1 files changed, 188 insertions, 0 deletions

diff --git a/firmware/export/config/gigabeatfx.h b/firmware/export/config/gigabeatfx.h
new file mode 100644
index 0000000000..363312a415
--- /dev/null
+++ b/firmware/export/config/gigabeatfx.h
@@ -0,0 +1,188 @@
+/*
+ * This config file is for toshiba Gigabeat F
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define TOSHIBA_GIGABEAT_F 1
+
+#define MODEL_NAME "Toshiba Gigabeat F"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 18
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* LCD dimensions */
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 320
+#define LCD_DEPTH  16   /* 65k colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+#ifndef BOOTLOADER
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+   should be defined as well. */
+#define HAVE_LCD_SLEEP
+/* We don't use a setting but a fixed delay after the backlight has
+ * turned off */
+#define LCD_SLEEP_TIMEOUT (5*HZ)
+
+#define HAVE_TOUCHPAD_SENSITIVITY_SETTING
+
+#define HAVE_HARDWARE_BEEP
+
+#endif /* BOOTLOADER */
+
+#define CONFIG_KEYPAD GIGABEAT_PAD
+
+/* Define this to enable morse code input */
+#define HAVE_MORSE_INPUT
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_S3C2440
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define HAVE_BUTTON_LIGHT
+
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+#define HAVE_BUTTONLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING          1   /* 0.5 mA */
+#define MAX_BRIGHTNESS_SETTING          12  /* 32 mA */
+#define DEFAULT_BRIGHTNESS_SETTING      10  /* 16 mA */
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE 1
+
+/* Define this if you have the WM8975 audio codec */
+#define HAVE_WM8751
+
+/* Define this if you want to use the adaptive bass capibility of the 8751 */
+/* #define USE_ADAPTIVE_BASS */
+
+#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
+                       SAMPR_CAP_11)
+
+/* All exact rates for 16.9344MHz clock */
+#define CODEC_SRCTRL_11025HZ     (0x19 << 1)
+#define CODEC_SRCTRL_22050HZ     (0x1b << 1)
+#define CODEC_SRCTRL_44100HZ     (0x11 << 1)
+#define CODEC_SRCTRL_88200HZ     (0x1f << 1)
+
+#define HAVE_HEADPHONE_DETECTION
+
+#define BATTERY_CAPACITY_DEFAULT 830 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 830        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 830        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 25         /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Hardware controlled charging with monitoring */
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+/* define current usage levels */
+#define CURRENT_NORMAL     46 /* 18 hours from an 830 mah battery*/  
+#define CURRENT_BACKLIGHT  30 /* seems reasonable */ 
+#define CURRENT_RECORD     0  /* no recording on the gigabeat F/X */ 
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* define this if the unit has a battery switch or battery can be removed
+ * when running */
+#define HAVE_BATTERY_SWITCH
+
+#define HAVE_LCD_FLIP
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING        63
+#define DEFAULT_CONTRAST_SETTING    47 /* Match boot contrast */
+
+/* LCD invert - does not currently work */
+/* #define HAVE_LCD_INVERT */
+
+/* Define this if you have a Motorola SCF5249 */
+#define CONFIG_CPU S3C2440
+
+/* Define this if you want to use coldfire's i2c interface */
+#define CONFIG_I2C I2C_S3C2440
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x400000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 16934400
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+#define CONFIG_LCD LCD_GIGABEAT
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+/* #define HAVE_ADJUSTABLE_CPU_FREQ */
+
+#define BOOTFILE_EXT "gigabeat"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+