1 files changed, 202 insertions, 0 deletions

diff --git a/firmware/export/config/creativezenxfi2.h b/firmware/export/config/creativezenxfi2.h
new file mode 100644
index 0000000000..432d7949d3
--- /dev/null
+++ b/firmware/export/config/creativezenxfi2.h
@@ -0,0 +1,202 @@
+/*
+ * This config file is for the Creative Zen X-Fi2
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 82
+#define MODEL_NAME   "Creative Zen X-Fi2"
+
+#define HW_SAMPR_CAPS       SAMPR_CAP_ALL
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+#define REC_SAMPR_CAPS      SAMPR_CAP_ALL
+
+/* Default recording levels */
+#define DEFAULT_REC_MIC_GAIN    23
+#define DEFAULT_REC_LEFT_GAIN   23
+#define DEFAULT_REC_RIGHT_GAIN  23
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+#ifndef BOOTLOADER
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* Define this if a programmable hotkey is mapped */
+#define HAVE_HOTKEY
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* define this if you have LCD enable function */
+#define HAVE_LCD_ENABLE
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+   should be defined as well.
+#define HAVE_LCD_SLEEP
+#define HAVE_LCD_SLEEP_SETTING
+*/
+
+/* define this if you can flip your LCD
+#define HAVE_LCD_FLIP
+*/
+
+/* define this if you can invert the colours on your LCD
+#define HAVE_LCD_INVERT
+*/
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_IMX233
+
+/* define this if you have a real-time clock with alarm facilities */
+#define HAVE_RTC_ALARM
+
+#endif /* !BOOTLOADER */
+
+/* define this if you have an i.MX23 codec */
+#define HAVE_IMX233_CODEC
+
+#define CONFIG_TUNER STFM1000
+
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+#define CONFIG_KEYPAD CREATIVE_ZENXFI2_PAD
+#define HAVE_TOUCHSCREEN
+#define HAVE_BUTTON_DATA
+
+/* Define this to enable morse code input */
+#define HAVE_MORSE_INPUT
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* LCD dimensions */
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 400
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+#define LCD_DPI    150
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* Some Sansa Fuzes seem to be FAT16 formatted */
+#define HAVE_FAT16SUPPORT
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      0
+#define MAX_BRIGHTNESS_SETTING      100
+#define DEFAULT_BRIGHTNESS_SETTING  50
+
+/* Which backlight fading type? */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if the flash memory uses the SecureDigital Memory Card protocol */
+#define CONFIG_STORAGE (/*STORAGE_NAND |*/ STORAGE_SD)
+#define NUM_DRIVES 1
+#define HAVE_MULTIDRIVE
+#define HAVE_MULTIVOLUME
+#define HAVE_HOTSWAP_STORAGE_AS_MAIN
+#define HAVE_HOTSWAP
+#define CONFIG_NAND NAND_IMX233
+
+/* todo */
+#define BATTERY_CAPACITY_DEFAULT 550    /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 550        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 550        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0          /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
+
+/* Charging implemented in a target-specific algorithm */
+#define CONFIG_CHARGING CHARGING_TARGET
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* Define this if you have an IMX233*/
+#define CONFIG_CPU IMX233
+
+/* Define this if you want to use the IMX233 i2c interface */
+#define CONFIG_I2C I2C_IMX233
+
+/* define current usage levels (based on battery bench) */
+#define CURRENT_NORMAL     35
+#define CURRENT_BACKLIGHT  30
+#define CURRENT_RECORD     CURRENT_NORMAL
+
+/* maximum charging current */
+#define CURRENT_MAX_CHG   200
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      454000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_CREATIVEZXFI2
+
+/* Offset ( in the firmware file's header ) to the file CRC and data. These are
+   only used when loading the old format rockbox.e200 file */
+#define FIRMWARE_OFFSET_FILE_CRC    0x0
+#define FIRMWARE_OFFSET_FILE_DATA   0x8
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+//#define USB_HANDLED_BY_OF
+#define USE_ROCKBOX_USB
+#define USB_VENDOR_ID 0x041e
+#define USB_PRODUCT_ID 0x2020
+#define HAVE_USB_HID_MOUSE
+#define HAVE_BOOTLOADER_USB_MODE
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT    "creative"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define INCLUDE_TIMEOUT_API