1 files changed, 116 insertions, 0 deletions

diff --git a/firmware/export/config-m200.h b/firmware/export/config-m200.h
new file mode 100644
index 0000000000..760474d628
--- /dev/null
+++ b/firmware/export/config-m200.h
@@ -0,0 +1,116 @@
+/*
+ * This config file is for the Sansa M200 series
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 28
+
+/* define this if you have recording possibility */
+//#define HAVE_RECORDING
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you can flip your LCD */
+#define HAVE_LCD_FLIP
+
+/* define this if you can invert the colours on your LCD */
+#define HAVE_LCD_INVERT
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 64
+#define LCD_DEPTH  1
+
+#define LCD_PIXELFORMAT VERTICAL_PACKING
+
+/* define this to indicate your device's keypad */
+#define CONFIG_KEYPAD SANSA_M200_PAD
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_TCC77X
+
+/* define this if you have RTC RAM available for settings */
+//#define HAVE_RTC_RAM
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x8000
+
+#define AB_REPEAT_ENABLE 1
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* Define this if you have the TLV320 audio codec */
+#define HAVE_TLV320
+
+/* TLV320 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define CONFIG_I2C I2C_TCC77X
+
+#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 50   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+
+/* define this if the unit should not shut down on low battery. */
+#define NO_LOW_BATTERY_SHUTDOWN
+
+#ifndef SIMULATOR
+
+/* Define this if you have a TCC773L */
+#define CONFIG_CPU TCC773L
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      120000000
+
+/* Offset ( in the firmware file's header ) to the file length */
+#define FIRMWARE_OFFSET_FILE_LENGTH 0
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 4
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 6
+
+/* The start address index for ROM builds */
+/* #define ROM_START 0x11010 for behind original Archos */
+#define ROM_START 0x7010 /* for behind BootBox */
+
+/* Software controlled LED */
+#define CONFIG_LED LED_VIRTUAL
+
+#define CONFIG_LCD LCD_SSD1815
+
+#define BOOTFILE_EXT "m200"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/"
+
+#endif /* SIMULATOR */