1 files changed, 219 insertions, 0 deletions

diff --git a/firmware/drivers/lcd-h300.c b/firmware/drivers/lcd-h300.c
new file mode 100644
index 0000000000..1e71da59a8
--- /dev/null
+++ b/firmware/drivers/lcd-h300.c
@@ -0,0 +1,219 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2004 by Linus Nielsen Feltzing
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+
+#include "cpu.h"
+#include "lcd.h"
+#include "kernel.h"
+#include "thread.h"
+#include <string.h>
+#include <stdlib.h>
+#include "file.h"
+#include "debug.h"
+#include "system.h"
+#include "font.h"
+#include "bidi.h"
+
+void lcd_write_reg(int reg, int val)
+{
+    *(volatile unsigned short *)0xf0000000 = reg;
+    *(volatile unsigned short *)0xf0000002 = val;
+}
+
+void lcd_begin_write_gram(void)
+{
+    *(volatile unsigned short *)0xf0000000 = 0x22;
+}
+
+void lcd_write_data(const unsigned short* p_bytes, int count)
+{
+    while(count--)
+        *(volatile unsigned short *)0xf0000002 = *p_bytes++;
+}
+
+/*** hardware configuration ***/
+
+int lcd_default_contrast(void)
+{
+    return 28;
+}
+
+#ifndef SIMULATOR
+
+void lcd_set_contrast(int val)
+{
+    (void)val;
+}
+
+void lcd_set_invert_display(bool yesno)
+{
+    (void)yesno;
+}
+
+/* turn the display upside down (call lcd_update() afterwards) */
+void lcd_set_flip(bool yesno)
+{
+    (void)yesno;
+}
+
+/* Rolls up the lcd display by the specified amount of lines.
+ * Lines that are rolled out over the top of the screen are
+ * rolled in from the bottom again. This is a hardware 
+ * remapping only and all operations on the lcd are affected.
+ * -> 
+ * @param int lines - The number of lines that are rolled. 
+ *  The value must be 0 <= pixels < LCD_HEIGHT. */
+void lcd_roll(int lines)
+{
+    (void)lines;
+}
+
+#endif /* !SIMULATOR */
+
+/* LCD init */
+#ifndef SIMULATOR
+void lcd_init_device(void)
+{
+    /* GPO46 is LCD RESET */
+    or_l(0x00004000, &GPIO1_OUT);
+    or_l(0x00004000, &GPIO1_ENABLE);
+    or_l(0x00004000, &GPIO1_FUNCTION);
+
+    /* Reset LCD */
+    sleep(1);
+    and_l(~0x00004000, &GPIO1_OUT);
+    sleep(1);
+    or_l(0x00004000, &GPIO1_OUT);
+    sleep(1);
+
+    lcd_write_reg(0x00, 0x0001);
+    sleep(1);
+    lcd_write_reg(0x07, 0x0040);
+    lcd_write_reg(0x12, 0x0000);
+    lcd_write_reg(0x13, 0x0000);
+    sleep(1);
+    lcd_write_reg(0x11, 0x0003);
+    lcd_write_reg(0x12, 0x0008);
+    lcd_write_reg(0x13, 0x3617);
+    lcd_write_reg(0x12, 0x0008);
+    lcd_write_reg(0x10, 0x0004);
+    lcd_write_reg(0x10, 0x0004);
+    lcd_write_reg(0x11, 0x0002);
+    lcd_write_reg(0x12, 0x0018);
+    lcd_write_reg(0x10, 0x0044);
+    sleep(1);
+    lcd_write_reg(0x10, 0x0144);
+    lcd_write_reg(0x10, 0x0540);
+    lcd_write_reg(0x13, 0x3218);
+    lcd_write_reg(0x01, 0x001b);
+    lcd_write_reg(0x02, 0x0700);
+    lcd_write_reg(0x03, 0x7038);
+    lcd_write_reg(0x04, 0x7030);
+    lcd_write_reg(0x05, 0x0000);
+    lcd_write_reg(0x40, 0x0000);
+    lcd_write_reg(0x41, 0x0000);
+    lcd_write_reg(0x42, 0xdb00);
+    lcd_write_reg(0x43, 0x0000);
+    lcd_write_reg(0x44, 0xaf00);
+    lcd_write_reg(0x45, 0xdb00);
+
+    lcd_write_reg(0x0b, 0x0002);
+    lcd_write_reg(0x0c, 0x0003);
+    sleep(1);
+    lcd_write_reg(0x10, 0x4540);
+    lcd_write_reg(0x07, 0x0041);
+    sleep(1);
+    lcd_write_reg(0x08, 0x0808);
+    lcd_write_reg(0x09, 0x003f);
+    sleep(1);
+    lcd_write_reg(0x07, 0x0636);
+    sleep(1);
+    lcd_write_reg(0x07, 0x0626);
+    sleep(1);
+    lcd_write_reg(0x30, 0x0003);
+    lcd_write_reg(0x31, 0x0707);
+    lcd_write_reg(0x32, 0x0007);
+    lcd_write_reg(0x33, 0x0705);
+    lcd_write_reg(0x34, 0x0007);
+    lcd_write_reg(0x35, 0x0000);
+    lcd_write_reg(0x36, 0x0407);
+    lcd_write_reg(0x37, 0x0507);
+    lcd_write_reg(0x38, 0x1d09);
+    lcd_write_reg(0x39, 0x0303);
+    
+    lcd_write_reg(0x13, 0x2610);
+
+    /* LCD ON */
+    lcd_write_reg(0x07, 0x0061);
+    sleep(1);
+    lcd_write_reg(0x07, 0x0067);
+    sleep(1);
+    lcd_write_reg(0x07, 0x0637);
+}
+
+/*** update functions ***/
+
+/* Performance function that works with an external buffer
+   note that by and bheight are in 8-pixel units! */
+void lcd_blit(const fb_data* data, int x, int by, int width,
+              int bheight, int stride)
+{
+    /* TODO: Implement lcd_blit() */
+    (void)data;
+    (void)x;
+    (void)by;
+    (void)width;
+    (void)bheight;
+    (void)stride;
+}
+
+
+/* Update the display.
+   This must be called after all other LCD functions that change the display. */
+void lcd_update(void) ICODE_ATTR;
+void lcd_update(void)
+{
+    /* Copy display bitmap to hardware */
+    lcd_write_reg(0x21, 0);
+    lcd_begin_write_gram();
+    lcd_write_data((unsigned short *)lcd_framebuffer, LCD_WIDTH*LCD_HEIGHT);
+}
+
+/* Update a fraction of the display. */
+void lcd_update_rect(int, int, int, int) ICODE_ATTR;
+void lcd_update_rect(int x, int y, int width, int height)
+{
+    int ymax = y + height;
+
+    if(x + width > LCD_WIDTH)
+        width = LCD_WIDTH - x;
+    if (width <= 0)
+        return; /* nothing left to do, 0 is harmful to lcd_write_data() */
+    if(ymax >= LCD_HEIGHT)
+        ymax = LCD_HEIGHT-1;
+
+    /* Copy specified rectangle bitmap to hardware */
+    for (; y <= ymax; y++)
+    {
+        lcd_write_reg(0x21, (x << 8) + y);
+        lcd_begin_write_gram();
+        lcd_write_data ((unsigned short *)&lcd_framebuffer[y][x], width);
+    }
+}
+#endif /* !SIMULATOR */