5 files changed, 94 insertions, 82 deletions

diff --git a/apps/keymaps/keymap-clip.c b/apps/keymaps/keymap-clip.c
index 2dcc7e342a..5a4c990fe7 100644
--- a/apps/keymaps/keymap-clip.c
+++ b/apps/keymaps/keymap-clip.c
@@ -109,11 +109,17 @@ static const struct button_mapping button_context_list[]  = {
     { ACTION_LISTTREE_PGUP,   BUTTON_HOME|BUTTON_LEFT,   BUTTON_HOME },
     { ACTION_LISTTREE_PGDOWN, BUTTON_HOME|BUTTON_RIGHT, BUTTON_HOME },
 
+#ifdef HAVE_VOLUME_IN_LIST
+    { ACTION_LIST_VOLUP,        BUTTON_VOL_UP|BUTTON_REPEAT,    BUTTON_NONE },
+    { ACTION_LIST_VOLUP,        BUTTON_VOL_UP,                  BUTTON_NONE },
+
+    { ACTION_LIST_VOLDOWN,      BUTTON_VOL_DOWN,                BUTTON_NONE },
+    { ACTION_LIST_VOLDOWN,      BUTTON_VOL_DOWN|BUTTON_REPEAT,  BUTTON_NONE },
+#endif
     LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
 }; /* button_context_list */
 
 static const struct button_mapping button_context_tree[]  = {
-    { ACTION_TREE_WPS,    BUTTON_UP|BUTTON_REPEAT,         BUTTON_NONE },
     { ACTION_TREE_STOP,   BUTTON_POWER|BUTTON_REL,      BUTTON_POWER },
 
     LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_LIST),
diff --git a/apps/plugins/SOURCES b/apps/plugins/SOURCES
index 7d48be60c1..8f461f37e2 100644
--- a/apps/plugins/SOURCES
+++ b/apps/plugins/SOURCES
@@ -151,3 +151,4 @@ superdom.c
 #endif /* m:robe 500 */
 
 md5sum.c
+test_boost.c
diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h
index 0a6164fbb6..63b4fd8617 100644
--- a/firmware/export/config-clip.h
+++ b/firmware/export/config-clip.h
@@ -75,6 +75,9 @@
 
 #define CONFIG_KEYPAD SANSA_CLIP_PAD
 
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
 /* Define this if you do software codec */
 #define CONFIG_CODEC SWCODEC
 /* There is no hardware tone control */
diff --git a/firmware/target/coldfire/iriver/system-iriver.c b/firmware/target/coldfire/iriver/system-iriver.c
index 1916eec0cd..aa24f6ecc9 100644
--- a/firmware/target/coldfire/iriver/system-iriver.c
+++ b/firmware/target/coldfire/iriver/system-iriver.c
@@ -50,22 +50,15 @@
  */
 
 #if MEM < 32
-#define MAX_REFRESH_TIMER     59
-#define NORMAL_REFRESH_TIMER  21
+#define MAX_REFRESH_TIMER     54
+#define NORMAL_REFRESH_TIMER  10
 #define DEFAULT_REFRESH_TIMER 4
 #else
-#define MAX_REFRESH_TIMER     29
-#define NORMAL_REFRESH_TIMER  10
+#define MAX_REFRESH_TIMER     26
+#define NORMAL_REFRESH_TIMER  4
 #define DEFAULT_REFRESH_TIMER 1
 #endif
 
-#ifdef IRIVER_H300_SERIES
-#define RECALC_DELAYS(f) \
-        pcf50606_i2c_recalc_delay(f)
-#else
-#define RECALC_DELAYS(f)
-#endif
-
 #ifdef HAVE_SERIAL
 #define BAUD_RATE 57600
 #define BAUDRATE_DIV_DEFAULT (CPUFREQ_DEFAULT/(BAUD_RATE*32*2))
@@ -73,6 +66,21 @@
 #define BAUDRATE_DIV_MAX (CPUFREQ_MAX/(BAUD_RATE*32*2))
 #endif
 
+static bool pll_initialized = false;
+
+static void init_pll(void)
+{
+    /* Refresh timer for bypass frequency */
+    PLLCR &= ~1;  /* Bypass mode */
+    PLLCR = 0x0189e025 | (PLLCR & 0x70400000); /* set 112 MHz */
+
+    /* Wait until the PLL has locked. This may take up to 10ms! */
+    while(!(PLLCR & 0x80000000)) {};
+
+    pll_initialized = true;
+}
+
+
 #ifdef HAVE_ADJUSTABLE_CPU_FREQ
 void set_cpu_frequency (long) __attribute__ ((section (".icode")));
 void set_cpu_frequency(long frequency)
@@ -81,84 +89,78 @@ void cf_set_cpu_frequency (long) __attribute__ ((section (".icode")));
 void cf_set_cpu_frequency(long frequency)
 #endif    
 {
+    if (!pll_initialized)
+        init_pll();
+
     switch(frequency)
     {
-    case CPUFREQ_MAX:
-        DCR = (0x8200 | DEFAULT_REFRESH_TIMER);
-              /* Refresh timer for bypass frequency */
-        PLLCR &= ~1;  /* Bypass mode */
-        timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, false);
-        RECALC_DELAYS(CPUFREQ_MAX);
-        PLLCR = 0x018ae025 | (PLLCR & 0x70400000);
-        CSCR0 = 0x00001180; /* Flash: 4 wait states */
-        CSCR1 = 0x00001580; /* LCD: 5 wait states */
+        case CPUFREQ_MAX:
+            CSCR0 = 0x00001180; /* Flash: 4 wait states */
+            CSCR1 = 0x00001580; /* LCD: 5 wait states */
 #if CONFIG_USBOTG == USBOTG_ISP1362
-        CSCR3 = 0x00002180; /* USBOTG: 8 wait states */
+            CSCR3 = 0x00002180; /* USBOTG: 8 wait states */
 #endif
-        while(!(PLLCR & 0x80000000)) {}; /* Wait until the PLL has locked.
-                                            This may take up to 10ms! */
-        timers_adjust_prescale(CPUFREQ_MAX_MULT, true);
-        DCR = (0x8200 | MAX_REFRESH_TIMER);          /* Refresh timer */
-        cpu_frequency = CPUFREQ_MAX;
-        IDECONFIG1 = 0x10100000 | (1 << 13) | (3 << 10);
-        /* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
-        IDECONFIG2 = 0x40000 | (1 << 8); /* TA enable + CS2wait */
-
-#ifdef HAVE_SERIAL
-        UBG10 = BAUDRATE_DIV_MAX >> 8;
-        UBG20 = BAUDRATE_DIV_MAX & 0xff;
+#if CONFIG_RTC == RTC_PCF50606
+            pcf50606_i2c_recalc_delay(CPUFREQ_MAX);
 #endif
-        break;
-
-    case CPUFREQ_NORMAL:
-        DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER;
-              /* Refresh timer for bypass frequency */
-        PLLCR &= ~1;  /* Bypass mode */
-        timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, false);
-        RECALC_DELAYS(CPUFREQ_NORMAL);
-        PLLCR = 0x0589e021 | (PLLCR & 0x70400000);
-        CSCR0 = 0x00000580; /* Flash: 1 wait state */
-        CSCR1 = 0x00000180; /* LCD: 0 wait states */
+            timers_adjust_prescale(CPUFREQ_MAX_MULT, true);
+            DCR = (0x8200 | MAX_REFRESH_TIMER);          /* Refresh timer */
+            IDECONFIG1 = 0x10100000 | (1 << 13) | (3 << 10);
+            /* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
+            IDECONFIG2 = 0x40000 | (1 << 8); /* TA enable 2 + CS2wait */
+
+            PLLCR = (PLLCR & ~0x07000000) | (1 << 24); /* set CPUDIV */
+            DCR = (0x8200 | MAX_REFRESH_TIMER); /* DRAM refresh timer */
+            cpu_frequency = CPUFREQ_MAX;
+            break;
+
+        case CPUFREQ_NORMAL:
+            PLLCR = (PLLCR & ~0x07000000) | (5 << 24); /* set CPUDIV */
+            DCR = (0x8000 | NORMAL_REFRESH_TIMER); /* DRAM refresh timer */
+            cpu_frequency = CPUFREQ_MAX;
+
+            CSCR0 = 0x00000580; /* Flash: 1 wait state */
+            CSCR1 = 0x00000180; /* LCD: 0 wait states */
 #if CONFIG_USBOTG == USBOTG_ISP1362
-        CSCR3 = 0x00000580; /* USBOTG: 1 wait state */
+            CSCR3 = 0x00000580; /* USBOTG: 1 wait state */
 #endif
-        while(!(PLLCR & 0x80000000)) {}; /* Wait until the PLL has locked.
-                                            This may take up to 10ms! */
-        timers_adjust_prescale(CPUFREQ_NORMAL_MULT, true);
-        DCR = (0x8000 | NORMAL_REFRESH_TIMER);       /* Refresh timer */
-        cpu_frequency = CPUFREQ_NORMAL;
-        IDECONFIG1 = 0x10100000 | (1 << 13) | (1 << 10);
-        /* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
-        IDECONFIG2 = 0x40000 | (0 << 8); /* TA enable + CS2wait */
+#if CONFIG_RTC == RTC_PCF50606
+            pcf50606_i2c_recalc_delay(CPUFREQ_NORMAL);
+#endif
+            timers_adjust_prescale(CPUFREQ_NORMAL_MULT, true);
 
-#ifdef HAVE_SERIAL
-        UBG10 = BAUDRATE_DIV_NORMAL >> 8;
-        UBG20 = BAUDRATE_DIV_NORMAL & 0xff;
+            IDECONFIG1 = 0x10100000 | (1 << 13) | (1 << 10);
+            /* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
+            IDECONFIG2 = 0x40000; /* TA enable 2 */
+            break;
+            
+        default:
+            DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER;
+            /* Refresh timer for bypass frequency */
+            PLLCR &= ~1;  /* Bypass mode */
+            timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, true);
+#if CONFIG_RTC == RTC_PCF50606
+            pcf50606_i2c_recalc_delay(CPUFREQ_DEFAULT_MULT);
 #endif
-        break;
-    default:
-        DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER;
-              /* Refresh timer for bypass frequency */
-        PLLCR &= ~1;  /* Bypass mode */
-        timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, true);
-        RECALC_DELAYS(CPUFREQ_DEFAULT);
-        /* Power down PLL, but keep CRSEL and CLSEL */
-        PLLCR = 0x00800200 | (PLLCR & 0x70400000);
-        CSCR0 = 0x00000180; /* Flash: 0 wait states */
-        CSCR1 = 0x00000180; /* LCD: 0 wait states */
+            /* Power down PLL, but keep CRSEL and CLSEL */
+            PLLCR = 0x00800200 | (PLLCR & 0x70400000);
+            CSCR0 = 0x00000180; /* Flash: 0 wait states */
+            CSCR1 = 0x00000180; /* LCD: 0 wait states */
 #if CONFIG_USBOTG == USBOTG_ISP1362
-        CSCR3 = 0x00000180; /* USBOTG: 0 wait states */
+            CSCR3 = 0x00000180; /* USBOTG: 0 wait states */
 #endif
-        DCR = (0x8000 | DEFAULT_REFRESH_TIMER);       /* Refresh timer */
-        cpu_frequency = CPUFREQ_DEFAULT;
-        IDECONFIG1 = 0x10100000 | (1 << 13) | (1 << 10);
-        /* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
-        IDECONFIG2 = 0x40000 | (0 << 8); /* TA enable + CS2wait */
+            DCR = (0x8000 | DEFAULT_REFRESH_TIMER);       /* Refresh timer */
+            cpu_frequency = CPUFREQ_DEFAULT;
+            IDECONFIG1 = 0x10100000 | (1 << 13) | (1 << 10);
+            /* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
+            IDECONFIG2 = 0x40000; /* TA enable 2 */
+
+            pll_initialized = false;
+            break;
+    }
 
 #ifdef HAVE_SERIAL
-        UBG10 = BAUDRATE_DIV_DEFAULT >> 8;
-        UBG20 = BAUDRATE_DIV_DEFAULT & 0xff;
+    UBG10 = BAUDRATE_DIV_NORMAL >> 8;
+    UBG20 = BAUDRATE_DIV_NORMAL & 0xff;
 #endif
-        break;
-    }
 }
diff --git a/firmware/target/coldfire/system-target.h b/firmware/target/coldfire/system-target.h
index 84ec6ed4b0..892cbe89cf 100644
--- a/firmware/target/coldfire/system-target.h
+++ b/firmware/target/coldfire/system-target.h
@@ -215,11 +215,11 @@ extern void cf_set_cpu_frequency(long frequency);
 /* 11.2896 MHz */
 #define CPUFREQ_DEFAULT_MULT 1
 #define CPUFREQ_DEFAULT      (CPUFREQ_DEFAULT_MULT * CPU_FREQ)
-/* 45.1584 MHz */
-#define CPUFREQ_NORMAL_MULT  4
+/* 22.5792 MHz */
+#define CPUFREQ_NORMAL_MULT  2
 #define CPUFREQ_NORMAL       (CPUFREQ_NORMAL_MULT * CPU_FREQ)
-/* 124.1856 MHz */
-#define CPUFREQ_MAX_MULT     11
+/* 112.896 MHz */
+#define CPUFREQ_MAX_MULT     10
 #define CPUFREQ_MAX          (CPUFREQ_MAX_MULT * CPU_FREQ)
 
 #endif /* SYSTEM_TARGET_H */