1 files changed, 198 insertions, 153 deletions

diff --git a/manual/configure_rockbox/display_options.tex b/manual/configure_rockbox/display_options.tex
index 9adffd7095..7bd969716b 100755
--- a/manual/configure_rockbox/display_options.tex
+++ b/manual/configure_rockbox/display_options.tex
@@ -2,92 +2,116 @@
 \section{\label{ref:Displayoptions}Display Options}
   
   \begin{description}
-  \item[Browse fonts:]
-    Browse the fonts that reside in your \fname{/.rockbox/fonts} directory. 
-    Selecting one will activate it. See page \pageref{ref:Loadingfonts} 
+  \nopt{player}{
+    \item[Browse fonts:]
+    Browse the fonts that reside in your \fname{/.rockbox/fonts} directory.
+    Selecting one will activate it. See page \pageref{ref:Loadingfonts}
     for further details about fonts.
-    
+  } % \nopt{player}
+  
   \item[Browse WPS files:]
-    Opens the File Browser in the \fname{/.rockbox/wps} directory and displays 
-    all \fname{.wps} files. Selecting one will activate it, stop will exit 
-    back to the menu.  For further information about the WPS see page 
+    Opens the \setting{File Browser} in the \fname{/.rockbox/wps} directory and
+    displays all \fname{.wps} files. Selecting one will activate it, stop will
+    exit back to the menu. For further information about the WPS see page 
     \pageref{ref:WPS}. For information about editing a .wps file see 
     page \pageref{ref:ConfiguringtheWPS}.
     
+  \opt{h1xx,h300,x5}{
+    \item[Browse RWPS files:]
+    Opens the \setting{File Browser} in the \fname{/.rockbox/wps} directory and
+    displays all \fname{.rwps} files. Selecting one will activate it, stop will
+    exit back to the menu.
+    \note{
+      A \fname{.rwps} file is a special \fname{.wps} file for the remote
+      display.
+    }
+  }
+  
   \item[LCD Settings:]
     This submenu contains settings that relate to the display of the \dap.
     \begin{description}
-    \item[Backlight:]
-    The amount of time the backlight shines after a key press. If set to 
-    ``Off'', the backlight will not light when a button is pressed. If 
-    set to ``On'', the backlight will never shut off. If set to a time 
-    (1 to 90 seconds), the backlight will stay lit for that amount of time 
-    after a button press.
-    \item[Backlight on When Plugged:]
-    This setting is equivalent to the Backlight setting except it applies when
-    the \dap\ is plugged into the charger. 
-    \item[Caption Backlight:] 
-    This option turns on the backlight a number of seconds before the start
-    of a new track, and keeps it on for the same number of seconds after the
-    beginning so that the display can be read to see song information. The
-    amount of time is determined by the value of the backlight timeout
-    setting, but is no less than 5 seconds.
-    \opt{h1xx,ipodnano,ipodcolour,ipodvideo}{
-      \item[Backlight fade in:]
-      The amount of time that the backlight will take to fade from off to on 
-      after a button is pressed. If set to ``Off'' the backlight will turn on 
-      immediately, with no fade in. Can also be set to 500ms, 1s or 2s.
-      \item[Backlight fade out:]
-      Like Backlight fade in, this controls the amount of time that the 
-      backlight will take to fade from on to off after a button is pressed. 
-      If set to ``Off'' the backlight will turn off immediately, with no fade 
-      out. Other valid values: 500ms, 1s, 2s, 3s, 4s, 5s or 10s.
-    }
-    \item[First Keypress Enables Backlight Only:]
-    With this option enabled the first keypress while the backlight is turned 
-    off will only turn the backlight on without having any other effect. When
-    disabled the first keypress will \emph{also} perform its appropriate action.
-    \opt{h300}{
-      \item[Brightness:]
+    \nopt{ondiofm,ondiosp}{
+      \item[Backlight:]
+      The amount of time the backlight shines after a key press. If set to
+      \setting{Off}, the backlight will not light when a button is pressed. If
+      set to \setting{On}, the backlight will never shut off. If set to a time
+      (1 to 90 seconds), the backlight will stay lit for that amount of time
+      after a button press.
+      \item[Backlight on When Plugged:]
+      This setting is equivalent to the Backlight setting except it applies when
+      the \dap\ is plugged into the charger. 
+      \item[Caption Backlight:]
+      This option turns on the backlight a number of seconds before the start
+      of a new track, and keeps it on for the same number of seconds after the
+      beginning so that the display can be read to see song information. The
+      amount of time is determined by the value of the backlight timeout
+      setting, but is no less than 5 seconds.
+      \opt{h1xx,ipodmini,ipodnano,ipodvideo}{
+        \item[Backlight fade in:]
+        The amount of time that the backlight will take to fade from off to on
+        after a button is pressed. If set to \setting{Off} the backlight will
+        turn on immediately, with no fade in. Can also be set to \setting{500ms},
+        \setting{1s} or \setting{2s}.
+        \item[Backlight fade out:]
+        Like Backlight fade in, this controls the amount of time that the
+        backlight will take to fade from on to off after a button is pressed. If
+        set to \setting{Off} the backlight will turn off immediately, with no
+        fade out. Other valid values: \setting{500ms}, \setting{1s},
+        \setting{2s}, \setting{3s}, \setting{4s}, \setting{5s} or \setting{10s}.
+      }
+      \item[First Keypress Enables Backlight Only:]
+      With this option enabled the first keypress while the backlight is turned
+      off will only turn the backlight on without having any other effect. When
+      disabled the first keypress will \emph{also} perform its appropriate action.
+      \opt{h300,x5}{
+        \item[Brightness:]
         Changes the brightness of your LCD display.
-    }
-    \item[Contrast:] 
-    Changes the contrast of your LCD display. 
-    \warn{Setting the contrast too dark or too light can make it hard to 
-      find this menu option again!}
-    \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolour,ipodvideo}{
-      \item[LCD Mode:] 
-      This setting lets you invert the whole screen, so now you get a 
-      black background and light text and graphics.
-    }
-    \item[Upside Down:]
-    Displays the screen so that the top of the display is nearest the buttons.
-    This is sometimes useful when carrying the \dap\ in a pocket for easy 
-    access to the headphone socket.
-    \item[Line Selector:]
-    This option allows you to select whether the line selector is a bar 
-    of inverted text (``Bar (inverse)'' option) or a small arrow to the 
-    left of the menu text (``Pointer'' option).  The default is 
-    ``Bar (inverse)''.
-    \opt{h300,ipodcolor,ipodvideo,x5}{
-      \item[Clear Backdrop:]
-      Rockbox allows you to select bitmap pictures to use as backdrops.  
-      These backdrops are set in the File Context Menu. \fixme{reference!}
-      This option allows you to clear the backdrops that you set.
-    }
-    \opt{h300,ipodnano,ipodcolour,ipodvideo}{
-    \item[Set Background Colour:] 
-      Sets the background colour for the LCD display.
-    \item[Set Foreground Colour:] 
-      Sets the foreground colour for the LCD display.
-    \item[Reset Colours:] 
-      Resets the LCD display to Rockbox's default colours.
-    }
+      }
+    } % \nopt{ondiofm,ondiosp}
+    
+    \opt{archos,h1xx,ipodmini,ipod4g,x5}{
+      \item[Contrast:]
+      Changes the contrast of your LCD display.
+      \warn{Setting the contrast too dark or too light can make it hard to
+        find this menu option again!}
+      \nopt{HAVE_LCD_COLOR,player}{
+        \item[LCD Mode:]
+        This setting lets you invert the whole screen, so now you get a
+        black background and light text and graphics.
+      } % \opt{HAVE_LCD_BITMAP}
+    } % \opt{archos,h1xx,ipodmini,ipod4g,x5}
+    
+    \opt{HAVE_LCD_BITMAP}{
+      \nopt{ipodcolor,ipodnano,ipodvideo}{
+        \item[Upside Down:]
+        Displays the screen so that the top of the display is nearest the buttons.
+        This is sometimes useful when carrying the \dap\ in a pocket for easy
+        access to the headphone socket.
+      } % \nopt{ipodcolor,ipodnano.ipodvideo}
+    
+      \item[Line Selector:]
+      This option allows you to select whether the line selector is a bar
+      of inverted text (\setting{Bar (inverse)} option) or a small arrow to the
+      left of the menu text (\setting{Pointer} option).
+    
+      \opt{HAVE_LCD_COLOR}{
+        \item[Clear Backdrop:]
+        Rockbox allows you to select bitmap pictures to use as backdrops.
+        These backdrops are set in the File Context Menu. \fixme{reference!}
+        This option allows you to clear the backdrops that you set.
+        \item[Set Background Colour:]
+        Sets the background colour for the LCD display.
+        \item[Set Foreground Colour:]
+        Sets the foreground colour for the LCD display.
+        \item[Reset Colours:]
+        Resets the LCD display to Rockbox's default colours.
+      }
+    } % \opt{HAVE_LCD_BITMAP}
     \end{description}
 %
   \opt{h1xx,h300,x5}{
     \item[Remote-LCD Settings:]
-    This submenu contains settings that relate to the display of the \dap.
+    This submenu contains settings that relate to the display of the remote.
       \begin{description}
       \item[Backlight:]
         Similar to the main unit backlight this option controls the backlight
@@ -96,146 +120,167 @@
       \item[Backlight on When Plugged:]
         This controls the backlight when the \dap\ is plugged into the charger.
       \item[Caption Backlight:]
-      This option turns on the backlight a number of seconds before the start
-      of a new track, and keeps it on for the same number of seconds after the
-      beginning so that the display can be read to see song information. The
-      amount of time is determined by the value of the backlight timeout 
-      setting, but is no less than 5 seconds. 
-      \opt{h1xx,ipodnano,ipodcolour,ipodvideo}{
+        This option turns on the backlight a number of seconds before the start
+        of a new track, and keeps it on for the same number of seconds after the
+        beginning so that the display can be read to see song information. The
+        amount of time is determined by the value of the backlight timeout
+        setting, but is no less than 5 seconds.
         \item[First Keypress Enables Backlight Only:]
-          This controls what happens when you press a button on your remote 
-          while the backlight is turned off.  Like for the main unit, if this 
-          setting is set to ``Yes'', the first keypress will light up the 
-          remote backlight, but have no other effect.  If set to ``No'', 
-          the first keypress will light up the remote backlight 
+          This controls what happens when you press a button on your remote
+          while the backlight is turned off. Like for the main unit, if this
+          setting is set to \setting{Yes}, the first keypress will light up the
+          remote backlight, but have no other effect. If set to \setting{No},
+          the first keypress will light up the remote backlight
           \emph{and} engage the function of the key that is pressed.
        \item[Contrast:]
-         Changes the contrast of your remote's LCD display. 
-         \warn{Setting the contrast too dark or too light can make it hard to 
+         Changes the contrast of your remote's LCD display.
+         \warn{Setting the contrast too dark or too light can make it hard to
            find this menu option again!}
        \item[LCD Mode:]
-         This setting lets you invert the whole screen, so now you get a 
+         This setting lets you invert the whole screen, so now you get a
          black background and light text and graphics.
        \item[Upside Down:]
          Displays the screen so that the top of the display is nearest 
-         the buttons.  This is sometimes useful when carrying the \dap\ in a 
+         the buttons. This is sometimes useful when carrying the \dap\ in a
          pocket for easy access to the headphone socket.
-      }
+       \opt{h1xx,h300}{
+         \item[Reduce Ticking:]
+           Enable this option if you can hear a ticking sound in your headphones
+           when using your remote.
+       }
     \end{description}
-                }
+  }
+%
   \item[Scrolling]
-    This feature controls how text will scroll in Rockbox. You can configure 
+    This feature controls how text will scroll in Rockbox. You can configure
     the following parameters:
     \begin{description}
     \item[Scroll Speed:]
       Controls how many times per second the scrolling text moves a step.
-    \item[Scroll StartDelay:]
-      Controls how many milliseconds Rockbox should wait before a new 
+    \item[Scroll Start Delay:]
+      Controls how many milliseconds Rockbox should wait before a new
       text begins scrolling.
-      \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolour,ipodvideo}{
+    \opt{HAVE_LCD_BITMAP}{
       \item[Scroll Step Size:]
         Controls how many pixels the text scroll should move for each step.
-      }
+    }
+    \opt{h1xx,h300,x5}{
+      \item[Remote Scrolling Options:]
+        The options here have the same effect on the remote LCD as the options
+        mentioned above have on the main LCD.
+    }
     \item[Bidirectional Scroll Limit:]
-      Rockbox has two different scroll methods: always scrolling the text 
-      to the left and when the line has ended beginning again at the start, 
-      or moving to the left until you can read the end of the line and scroll 
-      right until you see the beginning again. Rockbox chooses which method 
-      it should use depending of how much it has to scroll left. This setting 
-      lets you tell Rockbox where that limit is, expressed in percentage of 
+      Rockbox has two different scroll methods: always scrolling the text
+      to the left and when the line has ended beginning again at the start,
+      or moving to the left until you can read the end of the line and scroll
+      right until you see the beginning again. Rockbox chooses which method
+      it should use depending of how much it has to scroll left. This setting
+      lets you tell Rockbox where that limit is, expressed in percentage of
       line length.
-    \item[Screen Scrolls Out of View:]
-      On lists with long entries that don't fit on the screen using 
-      \opt{recorder,recorderv2fm,h1xx,h300}{\ButtonOn+\ButtonRight/
-        \ButtonLeft}\opt{ondio}{\ButtonMenu+\ButtonRight/\ButtonLeft}
-      the complete content will be scrolled right/left. With this option set to
-      \setting{Yes} the lines can scroll out of view. Otherwise the entries
-      will only scroll as far as they align to the margins.
-    \item[Screen Scroll Step Size:]
-      Determines how many pixels the text should advance in every click when
-      scrolling the screen.
+    \opt{HAVE_LCD_BITMAP}{
+      \item[Screen Scrolls Out of View:]
+        On lists with long entries that don't fit on the screen using 
+        \opt{recorder,recorderv2fm,h1xx,h300}{\ButtonOn+\ButtonRight/
+          \ButtonLeft}\opt{ondio}{\ButtonMenu+\ButtonRight/\ButtonLeft}
+        the complete content will be scrolled right/left. With this option set to
+        \setting{Yes} the lines can scroll out of view. Otherwise the entries
+        will only scroll as far as they align to the margins.
+      \item[Screen Scroll Step Size:]
+        Determines how many pixels the text should advance in every click when
+        scrolling the screen.
+    }
+    \opt{player}{
+      \item[Jump Scroll:]
+        This setting makes text scroll a page at a time instead of a character
+        at a time. If set to \setting{One time}, \setting{2}, \setting{3} or
+        \setting{4} it will scroll a line in paged mode that many times and
+        then scroll it a character at a time. If set to \setting{Always} lines
+        will always scroll in paged mode.
+      \item[Jump Scroll Delay:]
+        Controls how long the delay is before a page is scrolled.
+    }
     \item[Paged Scrolling:]
       When enabled scrolling will page up/down instead of changing lines. This
       can be useful on slow displays.
     \end{description}
-    %
-    \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolour,ipodvideo}{
+%
+  \opt{HAVE_LCD_BITMAP}{
     \item[Status/Scrollbar:]
       Settings related to on screen status display and the scrollbar.
       \begin{description}
       \item[Scroll Bar:] Enables or disables the scroll bar at the left.
       \item[Status Bar:] Enables or disables the status bar at the upper side.
       \opt{RECORDER_PAD}{
-       \item[Button Bar:] Enables or disables the button bar prompts for the 
+       \item[Button Bar:] Enables or disables the button bar prompts for the
          ``F''-keys at the bottom of the screen.
       }
-      \item[Volume Display:] Controls whether the volume is displayed as a 
-        graphic or a numeric value on the Status Bar.  If you select a numeric 
-        display, volume is displayed in decibels.  
+      \item[Volume Display:] Controls whether the volume is displayed as a
+        graphic or a numeric value on the Status Bar. If you select a numeric
+        display, volume is displayed in decibels.
         \fixme{cross-reference to volume setting.}
-      \item[Battery Display:] Controls whether the battery charge status is 
+      \item[Battery Display:] Controls whether the battery charge status is
         displayed as a graphic or numerical percentage value on the Status Bar.
       \end{description}
     }
-    %
-    \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolour,ipodvideo}{
+%
+  \opt{HAVE_LCD_BITMAP}{
     \item[Peak Meter:]
       The peak meter can be configured with a number of parameters. 
       (For a description of the peak meter see page \pageref{sec:peakmeter}.)
       \begin{description}
       \item[Peak Release:]
-        This determines how fast the bar shrinks when the music becomes 
+        This determines how fast the bar shrinks when the music becomes
         softer. Lower values make the peak meter look smoother.
       \item[Peak Hold Time:]
-        Specifies the time after which the peak indicator will reset.  
-        For example, if you set this value to 5s, the peak indicator displays 
-        the loudest volume value that occurred within the last 5 seconds.  
-        Larger values are useful if you want to find the peak level of a song, 
-        which might be of interest when copying music from the \dap via the 
+        Specifies the time after which the peak indicator will reset.
+        For example, if you set this value to 5s, the peak indicator displays
+        the loudest volume value that occurred within the last 5 seconds.
+        Larger values are useful if you want to find the peak level of a song,
+        which might be of interest when copying music from the \dap\ via the
         analogue output to some other recording device.
       \item[Clip Hold Time:]
-        The number of seconds that the clipping indicator will be visible 
+        The number of seconds that the clipping indicator will be visible
         after clipping is detected.
       \item[Performance:]
-        In high performance mode, the peak meter is updated as often as 
-        possible. This reduces the chance of missing a peak value, making 
-        the peak meter more precise. In energy save mode, the peak meter is 
-        updated just often enough to look fluid.  This reduces the load on 
-        the CPU and thus saves a little bit of energy.  If you crave every 
-        second of runtime for your \dap\ or simply use the peak meter as a 
-        screen effect, the use of energy save mode is recommended.  If you 
-        want to use the peak meter as a measuring instrument you'll want to 
-        use high performance mode.  
+        In high performance mode, the peak meter is updated as often as
+        possible. This reduces the chance of missing a peak value, making
+        the peak meter more precise. In energy save mode, the peak meter is
+        updated just often enough to look fluid.  This reduces the load on
+        the CPU and thus saves a little bit of energy.  If you crave every
+        second of runtime for your \dap\ or simply use the peak meter as a
+        screen effect, the use of energy save mode is recommended.  If you
+        want to use the peak meter as a measuring instrument you'll want to
+        use high performance mode.
         \fixme{TODO:  determine which platforms support this feature.}
       \item[Scale:]
-        Select whether the peak meter displays linear or logarithmic values. 
-        The human ear perceives loudness on a logarithmic scale.  If the 
-        Scale setting is set to ``Logarithmic (dB)'' scale, the volume values 
-        are scaled logarithmically.  The volume meters of digital audio 
-        devices usually are scaled this way.  On the other hand, if you 
-        are interested in the power level that is applied to your headphones 
-        you should choose ``linear'' display.  This setting cannot be 
-        displayed in units like volts or watts because such units depend 
+        Select whether the peak meter displays linear or logarithmic values.
+        The human ear perceives loudness on a logarithmic scale. If the Scale
+        setting is set to \setting{Logarithmic} (dB) scale, the volume values
+        are scaled logarithmically. The volume meters of digital audio
+        devices usually are scaled this way. On the other hand, if you
+        are interested in the power level that is applied to your headphones
+        you should choose \setting{Linear} display. This setting cannot be
+        displayed in units like volts or watts because such units depend
         on your headphones.
       \item[Minimum and maximum range:]
-        These two options define the full value range that the peak meter 
-        displays. Recommended values for the ``Logarithmic (dB)'' setting 
-        are {}-40 dB for minimum and 0 dB for maximum. Recommended values 
-        for ``linear'' display are 0 and 100\%. Note that {}-40 dB is 
-        approximately 1\% in linear value, but if you change the minimum 
-        setting in linear mode slightly and then change to the dB scale, 
-        there will be a large change. You can use these values for `zooming' 
+        These two options define the full value range that the peak meter
+        displays. Recommended values for the \setting{Logarithmic} (dB) setting
+        are {}-40 dB for minimum and 0 dB for maximum. Recommended values
+        for \setting{Linear} display are 0 and 100\%. Note that {}-40 dB is
+        approximately 1\% in linear value, but if you change the minimum
+        setting in linear mode slightly and then change to the dB scale,
+        there will be a large change. You can use these values for `zooming'
         into the peak meter.
       \end{description}
     }
     \item[Default Codepage:]
       A codepage describes the way extended characters that aren't available
-      within the ASCII character set are encoded. ID3v1 tags don't have a 
+      within the ASCII character set are encoded. ID3v1 tags don't have a
       codepage encoding contained so Rockbox needs to know what encoding has
       been used when generating these tags. This should be ``ISO-8859-1'' but
       to support languages outside Western Europe most applications use
       the setting of your operating system instead. If your operating system
       uses a different codepage and you're getting garbled extended characters
-      you should adjust this settings. In most cases sticking to 
+      you should adjust this settings. In most cases sticking to
       ``ISO-8859-1'' would be sufficient.
   \end{description}