Splitting out www

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11952 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 0 insertions, 31 deletions

diff --git a/www/mods/disassemble.t b/www/mods/disassemble.t
deleted file mode 100644
index 0ae6b97bd8..0000000000
--- a/www/mods/disassemble.t
+++ /dev/null
@@ -1,31 +0,0 @@
-#define _PAGE_ Disassembling the Archos
-#include "head.t"
-
-<p>There are several ways to disassemble the Archos Jukeboxes.
-Here is an approach where you don't need to bend any metal parts.
-
-<p>You need a Torx 10 screwdriver and a very small (~2mm) philips head screwdriver.
-
-<p><img src="b10.jpg">
-<br>
-First, remove the battery covers and unscrew all 8 visible screws: 2 torx screws on the left and right sides, and 2 philips head screws on the top and bottom. Then you simply lift off the plastic top cover.
-<hr>
-
-<p><img src="b5.jpg"> <img src="b6.jpg">
-<br>
-Use your thumb nails to compress the thin edge of the rubber while gently pulling the metal plate over it.
-<hr>
-
-<p><img src="b7.jpg"> <img src="b8.jpg">
-<br>
-Do the same on the side.
-<hr>
-
-<p><img src="b9.jpg"> <img src="b11.jpg">
-<br>
-You have now freed one end of the Archos.
-Now lift the blue rubber bumbers up from the circuit board on the other end, and simply slide the Archos out of its back plate.
-
-<p><i>Björn</i>
-
-#include "foot.t"