More updates to Chapter 4 of the manual.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9344 a1c6a512-1295-4272-9138-f99709370657

5 files changed, 99 insertions, 73 deletions

diff --git a/manual/configure_rockbox/bookmarking.tex b/manual/configure_rockbox/bookmarking.tex
index 595e394edf..98ac0c0e27 100755
--- a/manual/configure_rockbox/bookmarking.tex
+++ b/manual/configure_rockbox/bookmarking.tex
@@ -1,10 +1,21 @@
   \subsection{\label{ref:Bookmarkconfigactual}Bookmarking}
-  
+  Bookmarks allow you to save your current position within a track so that you can return to it at a later time.
+
+        Bookmarks are saved on a per folder basis. In other words, all of the files in the same folder have their bookmarks stored together in the folder where the files are located. You can store multiple bookmarks for the same track.
   \begin{itemize}
-  \item \textbf{Bookmark on Stop}
-    Write a bookmark to the disk whenever the stop key is pressed.  If playback is stopped it can be resumed easily at a later time. The \textbf{Resume} function remembers your position in the most recently accessed track regardless of this setting.
-  \item \textbf{Load Last Bookmark}
-    When this is on, Rockbox automatically returns to the position of the last bookmark within a file when it is played.  If set to Ask, Rockbox will ask the user whether they want to start from the beginning or the bookmark.  When set to no, playback always starts from the beginning and the Bookmark file must be played or \textbf{Load Bookmark} selected from the \textbf{Bookmarks} submenu of the Main Menu while the file is playing.
-  \item \textbf{Maintain a list of Recently Used Bookmarks}
-    If this option is turned on, Rockbox will store a list of Bookmarks that have been accessed recently.  This is then accessible from the \textbf{Recent Bookmarks} option of the \textbf{Bookmarks} submenu of the Main Menu.
+  \item \textbf{Bookmark on Stop:  }
+        This option controls whether Rockbox writes a bookmark to the disk when the STOP button is pressed.  The options are:
+        \begin{itemize}
+        \item \textbf{Ask:  }Causes a prompt to be displayed whenever you press STOP, asking if you wish to 'Create a bookmark?'
+        \item \textbf{Yes:  }Turns on automatic bookmarking.
+        \item \textbf{No:  }Turns off automatic bookmarking.
+        \item \textbf{Ask - Recent Only:  }TODO
+        \item \textbf{Yes - Recent Only:  }TODO
+                \end{itemize}
+                \textbf{Note:  }The \textbf{Resume} function remembers your position in the most recently accessed track regardless of how the \textbf{Bookmark on Stop} option is set.
+    
+  \item \textbf{Load Last Bookmark:}
+    When the \textbf{Load Last Bookmark} option is set to YES, Rockbox automatically returns to the position of the last bookmark within a file when that file is played. When the \textbf{Load Last Bookmark} option is set to ASK, Rockbox will give the user the option of starting from the beginning of the track of or from the bookmark. When the \textbf{Load Last Bookmark} option is set to NO, playback always starts from the beginning of the track, and the user must play the bookmark or use the \textbf{Load Bookmark} function in the Main Menu, while the file is playing, to resume at the bookmarked location.
+  \item \textbf{Maintain a list of Recently Used Bookmarks:}
+    If this option is set to YES, Rockbox will store a list of bookmarks that have been accessed recently.  This list of bookmarks may be accessed through the \textbf{Recent Bookmarks} option of the \textbf{Bookmarks} submenu of the Main Menu.  If this option is set to UNIQUTE ONLY, (TODO--what does this mean?).  If this option is set to NO, Rockbox will not store a list of recent bookmarks; instead, the user must navigate to the folder containing the bookmark and play the bookmark to load it.
   \end{itemize}
\ No newline at end of file
diff --git a/manual/configure_rockbox/file_view.tex b/manual/configure_rockbox/file_view.tex
index c1621bce82..c8a880e49e 100755
--- a/manual/configure_rockbox/file_view.tex
+++ b/manual/configure_rockbox/file_view.tex
@@ -1,33 +1,29 @@
 \subsection{File View}
-  This menu deals with options relating to how the file browser displays files
+  The File View menu deals with options relating to how the File Browser displays files.
   
   \begin{itemize}
-  \item \textbf{Sort Case Sensitive}
-    If this option is enabled files that start with a lower case letter will appear after the files that start with an upper case letter have all been listed  If disabled, then case will be ignored when sorting files.
+  \item \textbf{Sort Case Sensitive:  }
+    If this option is set to YES, all files that start with upper case letters will be listed first, followed by all files that begin with lower case letters.  If this option is set to NO, then case will be ignored when sorting files.
   \item \textbf{Sort Directories}
-    This option controls how Rockbox sorts folders.  The default is to sort them alphabetically.  ``By date'' sorts them with the oldest folder first.  ``By newest date'' sorts them with the newest folder first.
+    This option controls how Rockbox sorts folders.  The default is to sort them alphabetically. ``By date'' sorts them with the oldest folder first.  ``By newest date'' sorts them with the newest folder first.
     
-  \item \textbf{Sort Files}
-    This option controls how Rockbox sorts files.  In addition to the options for directory sorting above, there is a ``By type'' option which sorts files alphabetically by their type (such as .mp3) then alphabetically within each type.
+  \item \textbf{Sort Files:  }
+    This option controls how Rockbox sorts files.  All of the options for "Sort Directories" are available in this option.  In addition, there is a ``By type'' option which sorts files alphabetically by their type (such as .mp3) then alphabetically within each type.
     
-  \item \textbf{\label{ref:ShowFiles}Show Files}
-    Controls which files are displayed in the directory browser:
+  \item \textbf{\label{ref:ShowFiles}Show Files:  }
+    This option controls which files are displayed in the File Browser:
     
     \begin{itemize}
-    \item \textbf{Music: }
-      Only directories, .m3u files and the supported \emph{audio} file formats are shown. Extensions are stripped. Files anddirectories starting with . or with the ``hidden'' flag set are hidden.
-    \item \textbf{Playlists:} 
-      Only shows directories and playlists, for simplified navigation.
-    \item \textbf{Supported:} 
-      All directories and files Rockbox understands (see page \pageref{ref:Supportedfileformats}) are shown. Files and directories starting with . or with the ``hidden'' flag set are hidden.
-    \item \textbf{All:}
-      All files and directories are shown. Extensions are shown. No files or directories are hidden
+    \item \textbf{Music: }The File Browser displays only folders, .m3u files and the supported \emph{audio} file formats.  Extensions are stripped.  Files and directories starting with . or with the ``hidden'' flag set are hidden.
+    \item \textbf{Playlists:  }The File Browser displays only directories and playlists, for simplified navigation.
+    \item \textbf{Supported:  }The File Browser displays all directories and files supported by Rockbox (see page \pageref{ref:Supportedfileformats}).  Files and directories starting with . or with the ``hidden'' flag set are hidden.
+    \item \textbf{All:  }The File Browser displays all files and directories. Extensions are shown. No files or directories are hidden.
     \end{itemize}
     
   \item \textbf{Follow Playlist}
-    If Follow Playlist is set to ``Yes'', you will find yourself in the same directory as the currently playing file if you go to the Directory Browser from the WPS. If set to ``No'', you will stay in the same directory as you were last in.
+    This option determine what directory the File Browser displays first.  If Follow Playlist is set to YES, when you enter the File Browser from the WPS, you will find yourself in the same directory as the currently playing file.  If Follow Playlist is set to NO, when you enter the File Browser from the WPS, you will find yourself in the directory you were in when you last left the File Browser.  
     
   \item \textbf{Show Icons}
-    This indicates whether Rockbox will display an icon representing what type a file is on the left of the file in the browser.  For details of these icons, please see page \pageref{ref:Supportedfileformats}.
+    Rockbox has the ability to display an icon to the left of the file in the File Browser.  For details of these icons, please see page \pageref{ref:Supportedfileformats}.
   \end{itemize}
- 
\ No newline at end of file
+   
\ No newline at end of file
diff --git a/manual/configure_rockbox/sound_settings.tex b/manual/configure_rockbox/sound_settings.tex
index 6a1a3dc6ae..08b4ff223c 100755
--- a/manual/configure_rockbox/sound_settings.tex
+++ b/manual/configure_rockbox/sound_settings.tex
@@ -3,7 +3,7 @@
   \includegraphics[width=4cm]{configure_rockbox/images/ss-sound-settings-\genericimg.png}
 \end{center}
 
-This menu offers a selection of sound properties you may change to improve your sound experience.
+The Sound Settings menu offers a selection of sound properties you may change to customize your listening experience.
 
 \begin{itemize}
 \item \textbf{Volume}
diff --git a/manual/configure_rockbox/system_options.tex b/manual/configure_rockbox/system_options.tex
index b090deff95..0976fe33b5 100755
--- a/manual/configure_rockbox/system_options.tex
+++ b/manual/configure_rockbox/system_options.tex
@@ -1,39 +1,38 @@
   \subsection{\label{ref:SystemOptions}System Options}
   
   \begin{itemize}
-  \item \textbf{Battery}
+  \item \textbf{Battery:  }
     Options relating to the batteries in the \dap.
     \begin{itemize}
-    \item \textbf{Battery Capacity} can be used to tell Rockbox what capacity (in mAh) of battery is being used inside it. 
+    \item \textbf{Battery Capacity:  }This setting can be used to tell Rockbox what capacity (in mAh) of battery is being used inside it. 
       \opt{player,recorder,recorderv2fm,ondio}{The default is 1500mAh for NiMH battery based units, and 2300mAh for LiOn battery based units, which is the capacity value for the standard batteries shipped with these units.}
       \opt{h1xx,h300}{The default is 1300mAh.}
-      This value is used for calculating remaining battery life.
+      \opt{ipodnano,ipodcolor,ipodvideo}{TODO:  correct battery values for ipod platforms.}
+      Rockbox uses this value to estimate remaining battery life for the status bar and WPS.
       \opt{recorder}{
       \item \textbf{Deep discharge}
         Set this to ON if you intend to keep your charger connected for a long period of time. It lets the batteries go down to 10\% before starting to charge again. Setting this to OFF will cause the charging to restart on 95\%.
       }
       \opt{recorder}{
       \item \textbf{Trickle Charge}
-        The \dap cannot be turned off while the charger is connected.
-        Therefore, trickle charge is needed to keep the batteries full after
-        charging has completed. For more in depth information about charging
-        see Battery FAQ in your \textbf{/.rockbox/docs }directory.
+        The \dap cannot be turned off while the charger is connected.  Therefore, trickle charge is needed to keep the batteries full after charging has completed. For more in depth information about charging see Battery FAQ in your \textbf{/.rockbox/docs }directory.
       }
     \end{itemize}
     
-  \item \textbf{Disk}
+  \item \textbf{Disk:  }
     Options relating to the hard disk.  
     
     \begin{itemize}
-    \item \textbf{DiskSpindown:}
-      Rockbox has a timer that makes it spin down the hard disk after being idle for acertain time. You can modify this timeout here. This idle time is only affected by user activity, like navigating through file browser. When the hard disk spins up to fill mp3 buffer, it automatically spins down afterwards.
+    \item \textbf{Disk Spindown:  }
+      Rockbox has a timer that makes it spin down the hard disk after it is idle for a certain amount of time.  This setting controls the amount of time between the last user activity and the time that the disk spins down.  This idle time is only affected by user activity, like navigating through file browser. When the hard disk spins up to fill mp3 buffer, it automatically spins down afterwards.
       \opt{recorder,h1xx,h300}{
-      \item \textbf{Disk Poweroff:}
-        Whether the disk is powered OFF or only set to ``sleep'' when spun    down. Power off uses less power but takes longer to spin{}-up.}
+      \item \textbf{Disk Poweroff:  }
+        This setting controls whether the disk is powered off or only set to ``sleep'' when spun down. If this setting is YES, the disk will power off.  If set to NO, the disk will enter ``sleep'' mode.  Power off uses less power but takes longer to spin{}-up.}
+      \item \textbf{Directory cache:  }  Rockbox has the ability to scan the contents of your drive in the background and save those contents to a cache in RAM.  The Directory Cache takes a small amount of memory away from Rockbox that would otherwise be used to buffer music, but it speeds up navigation by eliminating the slight pause between the time a navigation button is pressed and the time Rockbox responds.  Turning this setting ON activates the directory cache, and turning it OFF deactivates the directory cache.  Note:  the first time you set the directory cache to ON, Rockbox will take a few minutes to scan the drive and you will need to restart the player.  Thereafter, the directory cache will work in the background.  (TODO:  confirm that these last two sentences are true.)
     \end{itemize}
     
     \opt{recorder,recorderv2fm,h3xx}{
-    \item \textbf{Time and Date}
+    \item \textbf{Time and Date:}
       Time related menu options.
       
       \begin{itemize}
@@ -44,37 +43,35 @@
       \end{itemize}
     }
     
-  \item \textbf{\label{ref:idlepoweroff}Idle Poweroff}
-    Rockbox can be configured to turn off power after the unit has been idle for a defined number of minutes. The unit is idle when playback is stopped or paused. It is not idle while the USB or charger is connected, or while recording.
-    
-  \item \textbf{Sleep Timer}
-    This option lets you power off your \dap after playing for a given time. \opt{recorderv2fm}{This setting is reset on boot.  Using this option disables the \textbf{Wake up alarm} (see below).}
+  \item \textbf{\label{ref:idlepoweroff}Idle Poweroff:}
+    Rockbox can be configured to turn off power after the unit has been idle for a defined number of minutes.  The \dap\ is idle when playback is stopped or paused. It is not idle while the USB or charger is connected, or while recording.
     
+  \item \textbf{Sleep Timer:}
+    This option lets you power off your \dap after playing for a given time.            
+    \opt{recorderv2fm}{This setting is reset on boot.  Using this option disables the \textbf{Wake up alarm} (see below).}
     \opt{recorderv2fm}{
-    \item \textbf{Wake up alarm (Recorder v2/FM only)}
-      This option turns the \dap off and then starts it up again at the specified time. This is most useful when combined with the Resume setting in the Playback options set to ``Yes'', so that the \dap wakes up and immediately  starts playing music. Use LEFT and RIGHT to adjust the minutes setting, UP and DOWN to adjust the HOURS. PLAY confirms the alarm and shuts your \dap down, and STOP cancels setting an alarm.  If the \dap is turned on again before the alarm occurs the alarm will be canceled.  Using this option disables the \textbf{Sleep Timer} (see above).
+    \item \textbf{Wake up alarm:}
+      This option turns the \dap off and then starts it up again at the specified time.  This is most useful when combined with the ``resume'' setting in the ``Playback options'' menu is set to YES, so that the \dap wakes up and immediately starts playing music. Use LEFT and RIGHT to adjust the minutes setting, UP and DOWN to adjust the HOURS.  PLAY confirms the alarm and shuts your \dap down, and STOP cancels setting an alarm.  If the \dap is turned on again before the alarm occurs, the alarm will be canceled.  Using this option disables the \textbf{Sleep Timer} (see above).
     }
     
-  \item \textbf{Limits}
+  \item \textbf{Limits:}
     This submenu relates to limits in the Rockbox operating system.
     
     \begin{itemize}
     \item \textbf{Max files in dir browser:}
-      Configurable limit of files in the directory browser (file buffer size). You can configure the size to be between 50 and 10000 files in steps of 50 files. The default is 400, higher values will shorten the music buffer.\\
+      This setting controls the limit on the number of files that you can put in any particular directory in the file browser. You can configure the size to be between 50 and 10000 files in steps of 50 files. The default is 400.  Higher values will shorten the music buffer, so you should increase this setting \textbf{only} if you have directories with a large number of files.
+      
     \item \textbf{Max playlist size:}
-      Option to configure the maximum size of a playlist. The playlist size can be between 1000 and 20000 files in
-      steps of 1000.  By default it is 10000.  Higher values will shorten the music buffer.\\
+      This setting controls the maximum size of a playlist. The playlist size can be between 1,000 and 20,000 files, in steps of 1000.  The default is 10,000.  Higher values will shorten the music buffer, so you should increase this setting \textbf{only} if you have very large playlists.\\
     \end{itemize}
     
     \opt{player,recorder,recorderv2fm}{
     \item \textbf{Car Adapter Mode}
       This option turns on and off the car ignition auto stop function. 
       
-      When using the \dap in a car, car adapter mode automatically stops playback on the \dap when power (i.e. from cigarette lighter power adapter) to the external DC in jack is turned off.
-      
-      When the external power off condition is detected, the Car Adapter Mode function only pauses the playback. In order to shut down the \dap completely the \textbf{Idle Poweroff} function (see above) must also be set.
+      When using the \dap in a car, car adapter mode automatically stops playback on the \dap when power (i.e. from cigarette lighter power adapter) to the external DC in jack is turned off.  If the Car Adaptor Mode is set to ON, Rockbox will pause playback when the external power off condition is detected.  Rockbox will then shutdown the \dap after the length of time set in the \textbf{Idle Poweroff} setting (see above).  If power to the DC in jack is turned back on before the \textbf{Idle Poweroff} function has shut the \dap off, playback will be resumed 5 seconds after the power is applied. This delay is to allow for the time while the car engine is being started. 
       
-      If power to the DC in jack is turned back on before the \textbf{Idle Poweroff}  function has shut the \dap off, playback will be resumed 5 seconds after the power is applied. This delay is to allow for the time while the car engine is being started. Once the \dap is shut off either manually, or automatically with the \textbf{Idle Poweroff}function, it must be powered up manually to resume playback.
+      Once the \dap is shut off either manually, or automatically with the \textbf{Idle Poweroff}function, it must be powered up manually to resume playback.
     }
     \opt{player}{
     \item \textbf{Line In (Player only)}
@@ -89,17 +86,41 @@
     }
     
   \item \textbf{Manage settings}
-    This submenu deals with loading and saving settings.
+    This submenu deals with loading and saving settings.  \opt{MASCODEC}{This submenu also allows you to load or save different firmware versions.
+    }
     
     \begin{itemize}
     \item \textbf{Browse .cfg Files: }
-      This displays a list of configuration (.cfg) files stored in the \textbf{/.rockbox} system directory.  This is useful if the \dap is plugged into more than one different output device (e.g. headphones, computer, car stereo, hi{}-fi) so that a settings file can be maintained for each.
+      Opens the file browser in the \textbf{/.rockbox} directory and displays all .cfg (configuration) files.  Selecting a .cfg file will cause Rockbox to load that the settings contained in that file.  STOP will exit back to the menu. (TODO--proper button configurations for different platforms.)  See the \textbf{Write .cfg files} option on the Manage Settings menu for details of how to save and edit a configuration file.
+
+                \opt{MASCODEC}{
     \item \textbf{Browse Firmwares:} 
-      This displays a list of firmware file in the \fname{/.rockbox} system directory. Playing a firmware file loads it into memory.  Thus it is possible to run the original Archos firmware or a different version of Rockbox from here assuming that you have the right files installed on your disk.
+      This displays a list of firmware file in the \fname{/.rockbox} system directory.  
+                        \opt{recorder,recorderv2fm}{  Firmware files have an extension of .ajz.}
+                        \opt{player,ondio}{  Firmware files have an extension of .mod}
+      
+      Playing a firmware file loads it into memory.  Thus, it is possible to run the original Archos firmware or a different version of Rockbox from here assuming that you have the right files installed on your disk.  There's no need of any other file or directory to be installed to use this option; the firmware is resident in that one file.
+      }
     \item \textbf{Reset Settings: }
       This wipes the saved settings in the \dap and resets all settings to their default values.
+      \opt{h100, h300}{  \textbf{Note:  }  You can also reset all settings to their default values by turning off the \dap\, turning it back on, and pressing the REC button (TODO--proper button def) immediately after the \dap\ turns on.  (TODO:  check if this feature is available on other platforms.}
     \item \textbf{Write .cfg file: }
-      Saves the current settings into a .cfg file for later use with \textbf{Browse .cfg Files} above.
+                        This option writes a Rockbox configuration file to your jukebox's hard disk. The configuration file has the ".cfg" extension and is used to store all of the user settings that are described throughout this manual.
+
+                        A configuration file may reside anywhere on the hard disk. Multiple configuration files are permitted. So, for example, you could have a car.cfg file for the settings that you use while playing your jukebox in your car, and a headphones.cfg file to store the settings that you use while listening to your jukebox through headphones.
+
+                        The Rockbox configuration file is a plain text file, so once you use the \textbf{Write .cfg file} option to create the file, you can edit the file on your computer using any text editor program. Configuration files use the following formatting rules:
+
+                        \begin{enumerate}   
+                        \item Each setting must be on a separate line.
+                        \item Each line has the format ``setting: value''. 
+                        \item Values must be within the ranges specified in this manual for each setting.
+                        \item Lines starting with # are ignored. This lets you write comments into your configuration files.
+                        \end{enumerate}
+
+                        Configuration files may be loaded using the Browse .cfg files option on the Manage Settings menu.
+
+                        \textbf{Hint:  }Configuration files do not need to contain all of the Rockbox options.  You can create configuration files that change only certain settings. So, for example, let's say you typically use the \dap at one volume in the car, and another when using headphones.  Further, suppose you like to use an inverse LCD when you're in the car, and a regular LCD setting when you're using headphones.  You could create configuration files that control only the volume and LCD settings. Create a few different files with different settings, give each file a different name (such as car.cfg, headphones.cfg, etc.), and you can then use the \textbf{Browse .cfg files} option to quickly change settings.
     \end{itemize}
     
   \end{itemize}
diff --git a/manual/configure_rockbox/voice.tex b/manual/configure_rockbox/voice.tex
index b1f67b7893..1cb4d3fae0 100755
--- a/manual/configure_rockbox/voice.tex
+++ b/manual/configure_rockbox/voice.tex
@@ -1,20 +1,19 @@
-   \subsection{\label{ref:Voiceconfiguration}Voice}
+  \subsection{\label{ref:Voiceconfiguration}Voice}
   
   \begin{itemize}
-  \item \textbf{Voice Menus}
-    This option turns on the Voice User Interface, which will read out menu items and settings as they are selected by the cursor.  In order for this to work, a voice file must be present in the \textbf{/.rockbox/lang/} directory on the \dap.  Voice files are large (1.5MB) and are not shipped with Rockbox by default.
+  \item \textbf{Voice Menus:}
+    This option turns on the Voice User Interface, which will read out menu items and settings as they are selected by the cursor.  In order for this to work, a voice file must be present in the \textbf{/.rockbox/lang/} directory on the \dap\.  Voice files are large (1.5MB) and are not shipped with Rockbox by default.
     The voice file is the name of the language for which it is made, followed by the extension .voice.  So for English, the file name would be \fname{english.voice}.
-    This option is on by default.  It will do nothing unless the appropriate .voice file is installed in the correct place on the \dap.
-    \begin{itemize}
-    \item \textbf{Limitations}
+    This option is on by default.  It will do nothing unless the appropriate .voice file is installed in the correct place on the \dap\.
+  
+    \textbf{Limitations}
       \begin{itemize}
       \item Setting the Sound Option \textbf{Channels} to ``karaoke'' may disable voice menus.
       \item Plugins and the wake up alarm do not support voice features.
       \end{itemize}
-        \end{itemize}
-    
-  \item \textbf{Voice Directories}
-    This option turns on the speaking of directory names.  The \dap is not powerful enough to produce these voices in real time, so a number of options are available.
+  
+  \item \textbf{Voice Directories:}
+    This option turns on the speaking of directory names.  The \dap\ is not powerful enough to produce these voices in real time, so a number of options are available.
     \begin{itemize}
     \item \textbf{.talk mp3 clip: }
       Use special pre{}-recorded MP3 files (\fname{\_dirname.talk}) in each directory.  These must be generated in advance, and are typically produced synthetically using a text to speech engine on a PC.  If no such file exists, the output is as for the ``numbers'' option below.
@@ -26,8 +25,7 @@
       No attempt will be made to speak directory names.
     \end{itemize}
     
-  \item \textbf{Voice Filenames}
-    This option turns on the speaking of directory names.  The options provided are ``Spell'', ``Numbers'', and ``Off'' which function the same as for \textbf{Voice Directories} and ``.talk mp3 clip'', which functions as above except that the files are named with the same name as the music file (e.g. \fname{Punkadiddle.mp3 } would require a file called \textbf{Punkadiddle.mp3.talk}).
-\end{itemize}
+  \item \textbf{Voice Filenames:}
+    This option turns on the speaking of directory names.  The options provided are ``Spell'', ``Numbers'', and ``Off'' which function the same as for \textbf{Voice Directories} and ``.talk mp3 clip,'' which functions as above except that the files are named with the same name as the music file (e.g. \fname{Punkadiddle.mp3 } would require a file called \textbf{Punkadiddle.mp3.talk}).
+        \end{itemize}
 See \url{http://www.rockbox.org/twiki/bin/view/Main/VoiceHowto} for more details on configuring speech support in Rockbox.
-