Fuze PLUS Fix lcd_update_rect()

Lcd_update rect was hanging during horizontal screen update x = 238 and width = 2
which was within the bounds of the screen, this seems to be a weird corner case
but more testing needs done.

Update_rect now properly bounded between 0 - screen w/h
--Cleaned up code

Pixels in x are now multiples of 4.

Datasheet states:
-------------------------------------------------------------------------------------------
WORD_LENGTH=0 implies the input frame buffer is RGB 16 bits per pixel.
DATA_FORMAT_16_BIT field indicates if the pixels are in RGB 555 or RGB 565 format.
Limitations:
— BYTE_PACKING_FORMAT [3:0] should be 0x3 or 0xC if there is only one pixel per word.
— If there are two pixels per word, BYTE_PACKING_FORMAT [3:0] should be 0xF and
H_COUNT will be restricted to be a multiple of 2 pixels.

and

WORD_LENGTH=3 indicates that the input frame-buffer is RGB 24 bits per pixel (RGB 888). If
BYTE_PACKING_FORMAT [3:0] is 0x7, it indicates that there is only one pixel per 32-bit word
and there is no restriction on H_COUNT.
Limitations:
— If BYTE_PACKING_FORMAT [3:0] is 0xF, it indicates that the pixels are packed, i.e. there
are 4 pixels in 3 words or 12 bytes. In that case, H_COUNT must be a multiple of 4 pixels.
-------------------------------------------------------------------------------------------

We are using 16 bits per pixel and byte_packing = 0xF but device crashes with multiple of 2 pixels

Behaviour can be verified with plugin - oscilloscope, Horizontal mode device hangs as indicator
reaches right of screen

Change-Id: I1445f5334f4e7fe59304c65c76b47d0daa0614b2

0 files changed, 0 insertions, 0 deletions