Now define the exact LCD controller in use.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5557 a1c6a512-1295-4272-9138-f99709370657

8 files changed, 16 insertions, 0 deletions

diff --git a/firmware/export/config-fmrecorder.h b/firmware/export/config-fmrecorder.h
index c20c36ea43..f5e82bbd12 100644
--- a/firmware/export/config-fmrecorder.h
+++ b/firmware/export/config-fmrecorder.h
@@ -76,4 +76,6 @@
 /* Define this if you have a software controlled poweroff */
 #define HAVE_SW_POWEROFF
 
+#define CONFIG_LCD LCD_SSD1815
+
 #endif /* SIMULATOR */
diff --git a/firmware/export/config-h100.h b/firmware/export/config-h100.h
index a63a60ec57..ae468a2626 100644
--- a/firmware/export/config-h100.h
+++ b/firmware/export/config-h100.h
@@ -33,4 +33,6 @@
 /* Define this if you have ATA power-off control */
 #define HAVE_ATA_POWER_OFF
 
+#define CONFIG_LCD LCD_S1D15E06
+
 #endif
diff --git a/firmware/export/config-ondiofm.h b/firmware/export/config-ondiofm.h
index c7bdf2ae88..9a3993c53f 100644
--- a/firmware/export/config-ondiofm.h
+++ b/firmware/export/config-ondiofm.h
@@ -79,4 +79,6 @@
 /* define this if more than one device/partition can be used */
 #define HAVE_MULTIVOLUME
 
+#define CONFIG_LCD LCD_SSD1815
+
 #endif /* SIMULATOR */
diff --git a/firmware/export/config-ondiosp.h b/firmware/export/config-ondiosp.h
index 6b6251a627..89a17420c5 100644
--- a/firmware/export/config-ondiosp.h
+++ b/firmware/export/config-ondiosp.h
@@ -70,4 +70,6 @@
 /* define this if more than one device/partition can be used */
 #define HAVE_MULTIVOLUME
 
+#define CONFIG_LCD LCD_SSD1815
+
 #endif /* SIMULATOR */
diff --git a/firmware/export/config-player.h b/firmware/export/config-player.h
index 6ef61234ad..6ca5663563 100644
--- a/firmware/export/config-player.h
+++ b/firmware/export/config-player.h
@@ -66,4 +66,6 @@
 /* Define this for LCD backlight available */
 #define CONFIG_BACKLIGHT BL_PA14_LO /* port PA14, low active */
 
+#define CONFIG_LCD LCD_SSD1801
+
 #endif /* SIMULATOR */
diff --git a/firmware/export/config-recorder.h b/firmware/export/config-recorder.h
index 79fd116d4f..4d29b66fa0 100644
--- a/firmware/export/config-recorder.h
+++ b/firmware/export/config-recorder.h
@@ -70,4 +70,6 @@
 /* Define this for S/PDIF output available */
 #define HAVE_SPDIF_OUT
 
+#define CONFIG_LCD LCD_SSD1815
+
 #endif /* SIMULATOR */
diff --git a/firmware/export/config-recorderv2.h b/firmware/export/config-recorderv2.h
index 028a27095c..941946ace0 100644
--- a/firmware/export/config-recorderv2.h
+++ b/firmware/export/config-recorderv2.h
@@ -76,4 +76,6 @@
 /* Define this if you have a software controlled poweroff */
 #define HAVE_SW_POWEROFF
 
+#define CONFIG_LCD LCD_SSD1815
+
 #endif /* SIMULATOR */
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 75a1b3ff67..c6431298ef 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -51,6 +51,8 @@
 /* CONFIG_LCD */
 #define LCD_GMINI100 0
 #define LCD_SSD1815  1 /* as used by Archos Recorders and Ondios */
+#define LCD_SSD1801  2 /* as used by Archos Player/Studio */
+#define LCD_S1D15E06 3 /* as used by iRiver H100 series */
 
 /* CONFIG_BACKLIGHT */
 #define BL_PA14_LO  0 /* Player, PA14 low active */