diff options
author | Aidan MacDonald <amachronic@protonmail.com> | 2021-02-27 22:08:58 +0000 |
---|---|---|
committer | Aidan MacDonald <amachronic@protonmail.com> | 2021-03-28 00:01:37 +0000 |
commit | 3ec66893e377b088c1284d2d23adb2aeea6d7965 (patch) | |
tree | b647717f83ad56b15dc42cfdef5d04d68cd9bd6b /firmware/target/mips/ingenic_x1000/pwm-x1000.h | |
parent | 83fcbedc65f4b9ae7e491ecf6f07c0af4b245f74 (diff) | |
download | rockbox-3ec66893e377b088c1284d2d23adb2aeea6d7965.tar.gz rockbox-3ec66893e377b088c1284d2d23adb2aeea6d7965.zip |
New port: FiiO M3K on bare metal
Change-Id: I7517e7d5459e129dcfc9465c6fbd708619888fbe
Diffstat (limited to 'firmware/target/mips/ingenic_x1000/pwm-x1000.h')
-rw-r--r-- | firmware/target/mips/ingenic_x1000/pwm-x1000.h | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/firmware/target/mips/ingenic_x1000/pwm-x1000.h b/firmware/target/mips/ingenic_x1000/pwm-x1000.h new file mode 100644 index 0000000000..0cea266d63 --- /dev/null +++ b/firmware/target/mips/ingenic_x1000/pwm-x1000.h | |||
@@ -0,0 +1,47 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id$ | ||
9 | * | ||
10 | * Copyright (C) 2021 Aidan MacDonald | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License | ||
14 | * as published by the Free Software Foundation; either version 2 | ||
15 | * of the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
18 | * KIND, either express or implied. | ||
19 | * | ||
20 | ****************************************************************************/ | ||
21 | |||
22 | #ifndef __PWM_X1000_H__ | ||
23 | #define __PWM_X1000_H__ | ||
24 | |||
25 | /* Usage: | ||
26 | * - There are 5 PWM channels (0-4) corresponding to TCUs 0-4 | ||
27 | * - Call pwm_init(n) before using channel n | ||
28 | * - Call pwm_set_period() to change the period and duty cycle at any time | ||
29 | * - Call pwm_enable() and pwm_disable() to turn the output on and off | ||
30 | * - Don't allow two threads to control the same channel at the same time | ||
31 | * - Don't call pwm_init(), pwm_enable(), or pwm_disable() from an interrupt | ||
32 | * | ||
33 | * After calling pwm_init(), the channel is essentially in a disabled state so | ||
34 | * you will need to call pwm_set_period() and then pwm_enable() to turn it on. | ||
35 | * Don't alter the channel's TCU or GPIO pin state after calling pwm_init(). | ||
36 | * | ||
37 | * After calling pwm_disable(), it is safe to use the channel's TCU or GPIO pin | ||
38 | * for some other purpose, but you must call pwm_init() before you can use the | ||
39 | * channel as PWM output again. | ||
40 | */ | ||
41 | |||
42 | extern void pwm_init(int chn); | ||
43 | extern void pwm_set_period(int chn, int period_ns, int duty_ns); | ||
44 | extern void pwm_enable(int chn); | ||
45 | extern void pwm_disable(int chn); | ||
46 | |||
47 | #endif /* __PWM_X1000_H__ */ | ||