New Port: Eros Q Native

What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
   LO volume will only be put to user-defined max volume
   if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot

What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
   (sometimes it's completely silent, sometimes there's
    a click)
- Audio uses 16-bit volume scaling, so clicking/popping
   is pretty bad at lower volumes - need 32 bit volume
   scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support

Unknowns:
- Stereo Switch pins: Direction select, AC_DC
   (probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?

"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth

Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33

1 files changed, 1 insertions, 1 deletions

diff --git a/firmware/target/mips/ingenic_x1000/nand-x1000.c b/firmware/target/mips/ingenic_x1000/nand-x1000.c
index de6eb2fb67..a818ba10aa 100644
--- a/firmware/target/mips/ingenic_x1000/nand-x1000.c
+++ b/firmware/target/mips/ingenic_x1000/nand-x1000.c
@@ -58,7 +58,7 @@
 #define FREG_STATUS_ECC_UNCOR_ERR (2 << 4)
 
 const nand_chip supported_nand_chips[] = {
-#if defined(FIIO_M3K) || defined(SHANLING_Q1)
+#if defined(FIIO_M3K) || defined(SHANLING_Q1) || defined(EROS_QN)
     {
         /* ATO25D1GA */
         .mf_id = 0x9b,