New Port: Eros Q Native

What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
   LO volume will only be put to user-defined max volume
   if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot

What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
   (sometimes it's completely silent, sometimes there's
    a click)
- Audio uses 16-bit volume scaling, so clicking/popping
   is pretty bad at lower volumes - need 32 bit volume
   scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support

Unknowns:
- Stereo Switch pins: Direction select, AC_DC
   (probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?

"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth

Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33

1 files changed, 10 insertions, 0 deletions

diff --git a/firmware/target/mips/ingenic_x1000/msc-x1000.c b/firmware/target/mips/ingenic_x1000/msc-x1000.c
index d0359a53e2..dbc1ebbe89 100644
--- a/firmware/target/mips/ingenic_x1000/msc-x1000.c
+++ b/firmware/target/mips/ingenic_x1000/msc-x1000.c
@@ -63,6 +63,16 @@ static const msc_config msc_configs[] = {
         .cd_active_level = 0,
     },
     /* NOTE: SDIO wifi card is on msc1 */
+#elif defined(EROS_QN)
+#define MSC_CLOCK_SOURCE X1000_CLK_SCLK_A
+    {
+        .msc_nr = 0,
+        .msc_type = MSC_TYPE_SD,
+        .bus_width = 4,
+        .label = "microSD",
+        .cd_gpio = GPIO_MSC0_CD,
+        .cd_active_level = 0,
+    },
 #else
 # error "Please add X1000 MSC config"
 #endif