diff options
author | Aidan MacDonald <amachronic@protonmail.com> | 2021-02-27 22:08:58 +0000 |
---|---|---|
committer | Aidan MacDonald <amachronic@protonmail.com> | 2021-03-28 00:01:37 +0000 |
commit | 3ec66893e377b088c1284d2d23adb2aeea6d7965 (patch) | |
tree | b647717f83ad56b15dc42cfdef5d04d68cd9bd6b /firmware/target/mips/ingenic_x1000/gpio-x1000.h | |
parent | 83fcbedc65f4b9ae7e491ecf6f07c0af4b245f74 (diff) | |
download | rockbox-3ec66893e377b088c1284d2d23adb2aeea6d7965.tar.gz rockbox-3ec66893e377b088c1284d2d23adb2aeea6d7965.zip |
New port: FiiO M3K on bare metal
Change-Id: I7517e7d5459e129dcfc9465c6fbd708619888fbe
Diffstat (limited to 'firmware/target/mips/ingenic_x1000/gpio-x1000.h')
-rw-r--r-- | firmware/target/mips/ingenic_x1000/gpio-x1000.h | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/firmware/target/mips/ingenic_x1000/gpio-x1000.h b/firmware/target/mips/ingenic_x1000/gpio-x1000.h new file mode 100644 index 0000000000..f1a65b37b5 --- /dev/null +++ b/firmware/target/mips/ingenic_x1000/gpio-x1000.h | |||
@@ -0,0 +1,110 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id$ | ||
9 | * | ||
10 | * Copyright (C) 2021 Aidan MacDonald | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License | ||
14 | * as published by the Free Software Foundation; either version 2 | ||
15 | * of the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
18 | * KIND, either express or implied. | ||
19 | * | ||
20 | ****************************************************************************/ | ||
21 | |||
22 | #ifndef __GPIO_X1000_H__ | ||
23 | #define __GPIO_X1000_H__ | ||
24 | |||
25 | /* GPIO API | ||
26 | * -------- | ||
27 | * | ||
28 | * To assign a new function to a GPIO, call gpio_config(). This uses the | ||
29 | * hardware's GPIO Z facility to atomically most GPIO registers at once, | ||
30 | * so it can be used to make any state transition safely. Since GPIO Z is | ||
31 | * protected by a mutex, you can't call gpio_config() from interrupt context. | ||
32 | * | ||
33 | * If you need to use GPIO Z directly, then use gpio_lock() and gpio_unlock() | ||
34 | * to acquire the mutex. | ||
35 | * | ||
36 | * Depending on the current GPIO state, certain state transitions are safe to | ||
37 | * perform without locking, as they only change one register: | ||
38 | * | ||
39 | * - for pins in GPIO_OUTPUT state: | ||
40 | * - use gpio_out_level() to change the output level | ||
41 | * | ||
42 | * - for pins in GPIO_IRQ_LEVEL or GPIO_IRQ_EDGE state: | ||
43 | * - use gpio_irq_level() to change the trigger level | ||
44 | * - use gpio_irq_mask() to mask/unmask the IRQ | ||
45 | * | ||
46 | * - for pins in GPIO_DEVICE or GPIO_INPUT state: | ||
47 | * - no special transitions allowed | ||
48 | * | ||
49 | * - in all states: | ||
50 | * - use gpio_set_pull() to change the pull-up/pull-down state | ||
51 | */ | ||
52 | |||
53 | #include "x1000/gpio.h" | ||
54 | |||
55 | /* GPIO port numbers */ | ||
56 | #define GPIO_A 0 | ||
57 | #define GPIO_B 1 | ||
58 | #define GPIO_C 2 | ||
59 | #define GPIO_D 3 | ||
60 | #define GPIO_Z 7 | ||
61 | |||
62 | /* GPIO function bits */ | ||
63 | #define GPIO_F_PULL 16 | ||
64 | #define GPIO_F_INT 8 | ||
65 | #define GPIO_F_MASK 4 | ||
66 | #define GPIO_F_PAT1 2 | ||
67 | #define GPIO_F_PAT0 1 | ||
68 | |||
69 | /* GPIO function numbers */ | ||
70 | #define GPIO_DEVICE(i) ((i)&3) | ||
71 | #define GPIO_OUTPUT(i) (0x4|((i)&1)) | ||
72 | #define GPIO_INPUT 0x16 | ||
73 | #define GPIO_IRQ_LEVEL(i) (0x1c|((i)&1)) | ||
74 | #define GPIO_IRQ_EDGE(i) (0x1e|((i)&1)) | ||
75 | |||
76 | extern void gpio_init(void); | ||
77 | extern void gpio_lock(void); | ||
78 | extern void gpio_unlock(void); | ||
79 | extern void gpio_config(int port, unsigned pinmask, int func); | ||
80 | |||
81 | static inline void gpio_out_level(int port, unsigned pinmask, int level) | ||
82 | { | ||
83 | if(level) | ||
84 | jz_set(GPIO_PAT0(port), pinmask); | ||
85 | else | ||
86 | jz_clr(GPIO_PAT0(port), pinmask); | ||
87 | } | ||
88 | |||
89 | #define gpio_irq_level gpio_out_level | ||
90 | |||
91 | static inline void gpio_irq_mask(int port, unsigned pinmask, int masked) | ||
92 | { | ||
93 | if(masked) | ||
94 | jz_set(GPIO_MSK(port), pinmask); | ||
95 | else | ||
96 | jz_clr(GPIO_MSK(port), pinmask); | ||
97 | } | ||
98 | |||
99 | #define gpio_enable_irq(port, pinmask) gpio_irq_mask((port), (pinmask), 0) | ||
100 | #define gpio_disable_irq(port, pinmask) gpio_irq_mask((port), (pinmask), 1) | ||
101 | |||
102 | static inline void gpio_set_pull(int port, unsigned pinmask, int state) | ||
103 | { | ||
104 | if(state) | ||
105 | jz_set(GPIO_PULL(port), pinmask); | ||
106 | else | ||
107 | jz_clr(GPIO_PULL(port), pinmask); | ||
108 | } | ||
109 | |||
110 | #endif /* __GPIO_X1000_H__ */ | ||