ErosQNative: Enable Line Out capabilities on new revision players

The newer players have some changed hardware, but most importantly
the line out now appears to be routed through the stereo switch
instead of being hardwired directly off the DAC.

Disable muting the headphone amp, enable switching the stereo switch,
and rename some of the GPIOs to be more generic since the DAC,
headphone amp, and stereo switch all appear to have changed.

Change-Id: I220fe5e37bcbcd959b544183e1fcf70673a83c13

1 files changed, 20 insertions, 18 deletions

diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c b/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c
index b32a32a3a3..c53da728ff 100644
--- a/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c
+++ b/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c
@@ -27,20 +27,22 @@
 #include "gpio-x1000.h"
 #include "logf.h"
 
-/* Audio path appears to be:
- * DAC --> HP Amp --> Stereo Switch --> HP OUT
- *     \--> LO OUT
+/*
+ * Earlier devices audio path appears to be:
+ * DAC \--> HP Amp --> Stereo Switch --> HP OUT
+ *      \-> LO OUT
  *
- * The real purpose of the Stereo Switch is not clear.
- * It appears to switch sources between the HP amp and something,
- * likely something unimplemented. */
+ * Recent devices, the audio path seems to have changed to:
+ * DAC --> HP Amp --> Stereo Switch \--> HP OUT
+ *                                   \-> LO OUT
+ */
 
 void audiohw_init(void)
 {
     /* explicitly mute everything */
-    gpio_set_level(GPIO_MAX97220_SHDN, 0);
-    gpio_set_level(GPIO_ISL54405_MUTE, 1);
-    gpio_set_level(GPIO_PCM5102A_XMIT, 0);
+    gpio_set_level(GPIO_HPAMP_SHDN, 0);
+    gpio_set_level(GPIO_STEREOSW_MUTE, 1);
+    gpio_set_level(GPIO_DAC_XMIT, 0);
 
     aic_set_play_last_sample(true);
     aic_set_external_codec(true);
@@ -53,8 +55,8 @@ void audiohw_init(void)
     mdelay(10);
 
     /* power on DAC and HP Amp */
-    gpio_set_level(GPIO_PCM5102A_ANALOG_PWR, 1);
-    gpio_set_level(GPIO_MAX97220_POWER, 1);
+    gpio_set_level(GPIO_DAC_ANALOG_PWR, 1);
+    gpio_set_level(GPIO_HPAMP_POWER, 1);
 }
 
 void audiohw_postinit(void)
@@ -76,23 +78,23 @@ void audiohw_postinit(void)
     jz_writef(AIC_CCR, ERPL(0));
 
     /* unmute - attempt to make power-on pop-free */
-    gpio_set_level(GPIO_ISL54405_SEL, 0);
-    gpio_set_level(GPIO_MAX97220_SHDN, 1);
+    gpio_set_level(GPIO_STEREOSW_SEL, 0);
+    gpio_set_level(GPIO_HPAMP_SHDN, 1);
     mdelay(10);
-    gpio_set_level(GPIO_PCM5102A_XMIT, 1);
+    gpio_set_level(GPIO_DAC_XMIT, 1);
     mdelay(10);
-    gpio_set_level(GPIO_ISL54405_MUTE, 0);
+    gpio_set_level(GPIO_STEREOSW_MUTE, 0);
 }
 
 /* TODO: get shutdown just right according to dac datasheet */
 void audiohw_close(void)
 {
     /* mute - attempt to make power-off pop-free */
-    gpio_set_level(GPIO_ISL54405_MUTE, 1);
+    gpio_set_level(GPIO_STEREOSW_MUTE, 1);
     mdelay(10);
-    gpio_set_level(GPIO_PCM5102A_XMIT, 0);
+    gpio_set_level(GPIO_DAC_XMIT, 0);
     mdelay(10);
-    gpio_set_level(GPIO_MAX97220_SHDN, 0);
+    gpio_set_level(GPIO_HPAMP_SHDN, 0);
 }
 
 void audiohw_set_frequency(int fsel)