diff options
author | Marcin Bukat <marcin.bukat@gmail.com> | 2010-04-26 21:40:16 +0000 |
---|---|---|
committer | Marcin Bukat <marcin.bukat@gmail.com> | 2010-04-26 21:40:16 +0000 |
commit | 28d54c6016459ffe93c0be2efea7de27c38d783c (patch) | |
tree | 9a7a71481f0a82599616a3e9f4e5bdad9fee8d6c /firmware/target/coldfire/mpio/hd200/lcd-hd200.c | |
parent | b09d3aec392538ca0934644ff6357c41aaa4c323 (diff) | |
download | rockbox-28d54c6016459ffe93c0be2efea7de27c38d783c.tar.gz rockbox-28d54c6016459ffe93c0be2efea7de27c38d783c.zip |
Add MPIO HD200 port - new files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25725 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware/target/coldfire/mpio/hd200/lcd-hd200.c')
-rw-r--r-- | firmware/target/coldfire/mpio/hd200/lcd-hd200.c | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/firmware/target/coldfire/mpio/hd200/lcd-hd200.c b/firmware/target/coldfire/mpio/hd200/lcd-hd200.c new file mode 100644 index 0000000000..8cb9e8e087 --- /dev/null +++ b/firmware/target/coldfire/mpio/hd200/lcd-hd200.c | |||
@@ -0,0 +1,241 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id:$ | ||
9 | * | ||
10 | * Copyright (C) 2010 Marcin Bukat | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License | ||
14 | * as published by the Free Software Foundation; either version 2 | ||
15 | * of the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
18 | * KIND, either express or implied. | ||
19 | * | ||
20 | ****************************************************************************/ | ||
21 | |||
22 | #include "config.h" | ||
23 | |||
24 | #include "system.h" | ||
25 | #include "kernel.h" | ||
26 | #include "lcd.h" | ||
27 | |||
28 | /*** definitions ***/ | ||
29 | /* TOMATO LSI 0350 - definitions and slightly tweaked functions | ||
30 | * taken from lcd-remote-iaudio.c | ||
31 | */ | ||
32 | |||
33 | #define LCD_SET_DUTY_RATIO 0x48 | ||
34 | #define LCD_SELECT_ADC 0xa0 | ||
35 | #define LCD_SELECT_SHL 0xc0 | ||
36 | #define LCD_SET_COM0 0x44 | ||
37 | #define LCD_OSC_ON 0xab | ||
38 | #define LCD_SELECT_DCDC 0x64 | ||
39 | #define LCD_SELECT_RES 0x20 | ||
40 | #define LCD_SET_VOLUME 0x81 | ||
41 | #define LCD_SET_BIAS 0x50 | ||
42 | #define LCD_CONTROL_POWER 0x28 | ||
43 | #define LCD_DISPLAY_ON 0xae | ||
44 | #define LCD_SET_INITLINE 0x40 | ||
45 | #define LCD_SET_COLUMN 0x10 | ||
46 | #define LCD_SET_PAGE 0xb0 | ||
47 | #define LCD_SET_GRAY 0x88 | ||
48 | #define LCD_SET_PWM_FRC 0x90 | ||
49 | #define LCD_SET_POWER_SAVE 0xa8 | ||
50 | #define LCD_REVERSE 0xa6 | ||
51 | #define LCD_RESET 0xe2 | ||
52 | |||
53 | /* cached settings */ | ||
54 | static bool cached_invert = false; | ||
55 | static bool cached_flip = false; | ||
56 | static int cached_contrast = DEFAULT_CONTRAST_SETTING; | ||
57 | bool lcd_initialized = false; | ||
58 | |||
59 | /*** hardware configuration ***/ | ||
60 | int lcd_default_contrast(void) | ||
61 | { | ||
62 | return DEFAULT_CONTRAST_SETTING; | ||
63 | } | ||
64 | |||
65 | void lcd_powersave(bool on) | ||
66 | { | ||
67 | /* What is the point of having else construct here? */ | ||
68 | if(lcd_initialized) { | ||
69 | if (on) | ||
70 | lcd_write_command(LCD_SET_POWER_SAVE | 1); | ||
71 | else | ||
72 | lcd_write_command(LCD_SET_POWER_SAVE | 1); | ||
73 | } | ||
74 | } | ||
75 | |||
76 | void lcd_set_contrast(int val) | ||
77 | { | ||
78 | if (val < MIN_CONTRAST_SETTING) | ||
79 | val = MIN_CONTRAST_SETTING; | ||
80 | else if (val > MAX_CONTRAST_SETTING) | ||
81 | val = MAX_CONTRAST_SETTING; | ||
82 | |||
83 | cached_contrast = val; | ||
84 | if(lcd_initialized) | ||
85 | lcd_write_command_e(LCD_SET_VOLUME, val); | ||
86 | } | ||
87 | |||
88 | void lcd_set_invert_display(bool yesno) | ||
89 | { | ||
90 | cached_invert = yesno; | ||
91 | if(lcd_initialized) | ||
92 | lcd_write_command(LCD_REVERSE | yesno); | ||
93 | |||
94 | } | ||
95 | |||
96 | /* turn the display upside down (call lcd_update() afterwards) */ | ||
97 | void lcd_set_flip(bool yesno) | ||
98 | { | ||
99 | cached_flip = yesno; | ||
100 | if(lcd_initialized) | ||
101 | { | ||
102 | if(yesno) | ||
103 | { | ||
104 | lcd_write_command(LCD_SELECT_ADC | 1); | ||
105 | lcd_write_command(LCD_SELECT_SHL | 0); | ||
106 | lcd_write_command_e(LCD_SET_COM0, 0); | ||
107 | } | ||
108 | else | ||
109 | { | ||
110 | lcd_write_command(LCD_SELECT_ADC | 0); | ||
111 | lcd_write_command(LCD_SELECT_SHL | 8); | ||
112 | lcd_write_command_e(LCD_SET_COM0, 0); | ||
113 | } | ||
114 | } | ||
115 | |||
116 | } | ||
117 | |||
118 | void lcd_shutdown(void) | ||
119 | { | ||
120 | /* Set power save -> Power OFF (VDD - VSS) .. that's it */ | ||
121 | if (lcd_initialized) | ||
122 | lcd_write_command(LCD_SET_POWER_SAVE | 1); | ||
123 | } | ||
124 | |||
125 | void lcd_init_device(void) | ||
126 | { | ||
127 | and_l(~0x00000800, &GPIO_FUNCTION); /* CS3 line */ | ||
128 | |||
129 | /* LCD Reset GPO34 */ | ||
130 | or_l(0x00000004, &GPIO1_ENABLE); /* set as output */ | ||
131 | or_l(0x00000004, &GPIO1_FUNCTION); /* switch to secondary function - GPIO */ | ||
132 | |||
133 | and_l(~0x00000004, &GPIO1_OUT); /* RESET low */ | ||
134 | sleep(1); /* delay at least 1000 ns */ | ||
135 | or_l(0x00000004, &GPIO1_OUT); /* RESET high */ | ||
136 | sleep(1); | ||
137 | |||
138 | /* parameters setup taken from original firmware */ | ||
139 | lcd_write_command(LCD_RESET); | ||
140 | lcd_write_command_e(LCD_SET_DUTY_RATIO,0x80); /* 1/128 */ | ||
141 | lcd_write_command(LCD_OSC_ON); | ||
142 | lcd_write_command(LCD_SELECT_DCDC | 3); /* DC/DC 6xboost */ | ||
143 | lcd_write_command(LCD_SELECT_RES | 7); /* Regulator resistor: 7.2 */ | ||
144 | lcd_write_command(LCD_SET_BIAS | 6); /* 1/11 */ | ||
145 | lcd_write_command(LCD_SET_PWM_FRC | 6); /* 3FRC + 12PWM */ | ||
146 | lcd_write_command_e(LCD_SET_GRAY | 0, 0x00); | ||
147 | lcd_write_command_e(LCD_SET_GRAY | 1, 0x00); | ||
148 | lcd_write_command_e(LCD_SET_GRAY | 2, 0x0c); | ||
149 | lcd_write_command_e(LCD_SET_GRAY | 3, 0x00); | ||
150 | lcd_write_command_e(LCD_SET_GRAY | 4, 0xc4); | ||
151 | lcd_write_command_e(LCD_SET_GRAY | 5, 0x00); | ||
152 | lcd_write_command_e(LCD_SET_GRAY | 6, 0xcc); | ||
153 | lcd_write_command_e(LCD_SET_GRAY | 7, 0x00); | ||
154 | |||
155 | lcd_write_command(LCD_CONTROL_POWER | 7); /* All circuits ON */ | ||
156 | lcd_write_command(LCD_DISPLAY_ON | 1); /* display on */ | ||
157 | |||
158 | /* Ok we are ready */ | ||
159 | lcd_initialized = true; | ||
160 | |||
161 | lcd_set_flip(cached_flip); | ||
162 | lcd_set_contrast(cached_contrast); | ||
163 | lcd_set_invert_display(cached_invert); | ||
164 | |||
165 | lcd_update(); | ||
166 | } | ||
167 | |||
168 | /* Update the display. | ||
169 | This must be called after all other LCD functions that change the display. */ | ||
170 | void lcd_update(void) ICODE_ATTR; | ||
171 | void lcd_update(void) | ||
172 | { | ||
173 | int y; | ||
174 | if(!lcd_initialized) | ||
175 | return; | ||
176 | |||
177 | for(y = 0;y < LCD_FBHEIGHT;y++) | ||
178 | { | ||
179 | lcd_write_command(LCD_SET_PAGE | y); | ||
180 | lcd_write_command_e(LCD_SET_COLUMN, 0); | ||
181 | lcd_write_data(lcd_framebuffer[y], LCD_WIDTH); | ||
182 | } | ||
183 | |||
184 | |||
185 | } | ||
186 | |||
187 | /* Update a fraction of the display. */ | ||
188 | void lcd_update_rect(int, int, int, int) ICODE_ATTR; | ||
189 | void lcd_update_rect(int x, int y, int width, int height) | ||
190 | { | ||
191 | int ymax; | ||
192 | |||
193 | if (!lcd_initialized) | ||
194 | return; | ||
195 | |||
196 | |||
197 | /* The Y coordinates have to work on even 8 pixel rows */ | ||
198 | ymax = (y + height-1) >> 3; | ||
199 | y >>= 3; | ||
200 | |||
201 | if(x + width > LCD_WIDTH) | ||
202 | width = LCD_WIDTH - x; | ||
203 | if (width <= 0) | ||
204 | return; /* nothing left to do, 0 is harmful to lcd_write_data() */ | ||
205 | if(ymax >= LCD_FBHEIGHT) | ||
206 | ymax = LCD_FBHEIGHT-1; | ||
207 | |||
208 | /* Copy specified rectange bitmap to hardware */ | ||
209 | for (; y <= ymax; y++) | ||
210 | { | ||
211 | lcd_write_command(LCD_SET_PAGE | y ); | ||
212 | lcd_write_command_e(LCD_SET_COLUMN | ((x >> 4) & 0xf), x & 0x0f); | ||
213 | lcd_write_data (&lcd_framebuffer[y][x], width); | ||
214 | } | ||
215 | |||
216 | } | ||
217 | |||
218 | void lcd_blit_grey_phase(unsigned char *values, unsigned char *phases, | ||
219 | int x, int by, int width, int bheight, int stride) | ||
220 | { | ||
221 | (void)values; | ||
222 | (void)phases; | ||
223 | (void)x; | ||
224 | (void)by; | ||
225 | (void)width; | ||
226 | (void)bheight; | ||
227 | (void)stride; | ||
228 | /* empty stub */ | ||
229 | } | ||
230 | |||
231 | void lcd_blit_mono(const unsigned char *data, int x, int by, int width, | ||
232 | int bheight, int stride) | ||
233 | { | ||
234 | (void)data; | ||
235 | (void)x; | ||
236 | (void)by; | ||
237 | (void)width; | ||
238 | (void)bheight; | ||
239 | (void)stride; | ||
240 | /* empty stub */ | ||
241 | } | ||