DM320: Use SD/MMC data done interrupt

Wait on semaphore until DMA finishes instead of busy waiting. This
allows the CPU to be used by other tasks during transfers.

Increase peripheral clock frequency, divide AHB by 2 instead of 3.
Function clock frequency is AHB divided by MMC divider + 1.

Change-Id: Ic890634da7e3541962ea3501eae8fa2ca2db606a

1 files changed, 32 insertions, 17 deletions

diff --git a/firmware/target/arm/tms320dm320/sdmmc-dm320.c b/firmware/target/arm/tms320dm320/sdmmc-dm320.c
index cc5c4a822e..33354a3146 100644
--- a/firmware/target/arm/tms320dm320/sdmmc-dm320.c
+++ b/firmware/target/arm/tms320dm320/sdmmc-dm320.c
@@ -120,6 +120,7 @@ static struct sd_card_status sd_status[NUM_CARDS] =
 
 /* Shoot for around 75% usage */
 static struct mutex             sd_mtx SHAREDBSS_ATTR;
+static struct semaphore         data_done SHAREDBSS_ATTR;
 static volatile unsigned int    transfer_error[NUM_DRIVES];
 /* align on cache line size */
 static unsigned char    aligned_buffer[UNALIGNED_NUM_SECTORS * SD_BLOCK_SIZE] 
@@ -234,25 +235,20 @@ static int sd_poll_status(int st_reg_num, volatile unsigned int flag)
 
 static int dma_wait_for_completion(void)
 {
-    unsigned short dma_status;
+    uint16_t dma_status;
 
-    do
-    {
-        long time = current_tick;
+    semaphore_wait(&data_done, TIMEOUT_BLOCK);
 
-        if (TIME_AFTER(time, next_yield))
-        {
-            long ty = current_tick;
-            yield();
-            next_yield = ty + MIN_YIELD_PERIOD;
-        }
+    dma_status = IO_MMC_SD_DMA_STATUS1;
+    if (dma_status & MMC_DMASTAT1_TOUTDT)
+    {
+        return -EC_DATA_TIMEOUT;
+    }
 
-        dma_status = IO_MMC_SD_DMA_STATUS1;
-        if (dma_status & (1 << 13))
-        {
-            return -EC_DATA_TIMEOUT;
-        }
-    } while (dma_status & (1 << 12));
+    if (dma_status & MMC_DMASTAT1_RUNST)
+    {
+        panicf("Semaphore released while DMA still running");
+    }
 
     return EC_OK;
 }
@@ -794,6 +790,7 @@ int sd_init(void)
     if (!initialized)
     {
         mutex_init(&sd_mtx);
+        semaphore_init(&data_done, 1, 0);
         initialized = true;
     }
 
@@ -810,7 +807,7 @@ int sd_init(void)
 
     /* mmc module clock: 75 Mhz (AHB) / 2 = ~37.5 Mhz
      * (Frequencies above are taken from Sansa Connect's OF source code) */
-    IO_CLK_DIV3 = (IO_CLK_DIV3 & 0xFF00) | 0x02; /* OF uses 1 */
+    IO_CLK_DIV3 = (IO_CLK_DIV3 & 0xFF00) | 0x01;
 
     bitset16(&IO_CLK_MOD2, CLK_MOD2_MMC);
 
@@ -847,6 +844,10 @@ int sd_init(void)
 #endif
 #endif
 
+    /* Enable data done interrupt */
+    IO_MMC_INT_ENABLE |= MMC_IE_EDATDNE;
+    IO_INTC_EINT1 |= INTR_EINT1_MMCSDMS0;
+
     /* Disable Memory Card CLK - it is enabled on demand by TMS320DM320 */
     bitclr16(&IO_MMC_MEM_CLK_CONTROL, (1 << 8));
     mutex_unlock(&sd_mtx);
@@ -888,3 +889,17 @@ int sd_event(long id, intptr_t data)
 
     return rc;
 }
+
+void SD_MMC(void) __attribute__ ((section(".icode")));
+void SD_MMC(void)
+{
+    uint16_t status = IO_MMC_STATUS0;
+
+    /* Clear interrupt */
+    IO_INTC_IRQ1 = INTR_IRQ1_MMCSDMS0;
+
+    if (status & MMC_ST0_DATDNE)
+    {
+        semaphore_release(&data_done);
+    }
+}