Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 59 insertions, 0 deletions

diff --git a/firmware/target/arm/olympus/mrobe-100/powermgmt-mr100.c b/firmware/target/arm/olympus/mrobe-100/powermgmt-mr100.c
new file mode 100644
index 0000000000..1b6a52f517
--- /dev/null
+++ b/firmware/target/arm/olympus/mrobe-100/powermgmt-mr100.c
@@ -0,0 +1,59 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
+ * Revisions copyright (C) 2005 by Gerald Van Baren
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+#include "adc.h"
+#include "powermgmt.h"
+
+/* FIXME: All voltages copied from H10/Tatung Elio. This will need changing
+   proper power management. */
+
+const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
+{
+    3760
+};
+
+const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
+{
+    3650
+};
+
+/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
+const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
+{
+    { 3760, 3800, 3850, 3870, 3900, 3950, 4020, 4070, 4110, 4180, 4240 }
+};
+
+#if CONFIG_CHARGING
+/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
+const unsigned short percent_to_volt_charge[11] =
+{
+    3990, 4030, 4060, 4080, 4100, 4120, 4150, 4180, 4220, 4260, 4310
+};
+#endif /* CONFIG_CHARGING */
+
+#define BATTERY_SCALE_FACTOR 4650
+/* full-scale ADC readout (2^10) in millivolt */
+
+/* Returns battery voltage from ADC [millivolts] */
+unsigned int battery_adc_voltage(void)
+{
+    return (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) >> 10;
+}