Patch #5731 by Barry Wardell: more iriver h10 work. Thanks!

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10521 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 0 insertions, 72 deletions

diff --git a/firmware/target/arm/iriver/h10/ata-target.h b/firmware/target/arm/iriver/h10/ata-target.h
deleted file mode 100644
index a93af79015..0000000000
--- a/firmware/target/arm/iriver/h10/ata-target.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2006 by Barry Wardell
- *
- * All files in this archive are subject to the GNU General Public License.
- * See the file COPYING in the source tree root for full license agreement.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-
-/* ATA stuff was taken from the iPod code */
-
-/* Plain C read & write loops */
-#define PREFER_C_READING
-#define PREFER_C_WRITING
-
-#if (CONFIG_CPU == PP5002)
-#define ATA_IOBASE      0xc00031e0
-#define ATA_CONTROL     (*((volatile unsigned char*)(0xc00033f8)))
-#elif (CONFIG_CPU == PP5020)
-#define ATA_IOBASE      0xc30001e0
-#define ATA_CONTROL     (*((volatile unsigned char*)(0xc30003f8)))
-#endif
-
-#define ATA_DATA        (*((volatile unsigned short*)(ATA_IOBASE)))
-#define ATA_ERROR       (*((volatile unsigned char*)(ATA_IOBASE + 0x04)))
-#define ATA_NSECTOR     (*((volatile unsigned char*)(ATA_IOBASE + 0x08)))
-#define ATA_SECTOR      (*((volatile unsigned char*)(ATA_IOBASE + 0x0c)))
-#define ATA_LCYL        (*((volatile unsigned char*)(ATA_IOBASE + 0x10)))
-#define ATA_HCYL        (*((volatile unsigned char*)(ATA_IOBASE + 0x14)))
-#define ATA_SELECT      (*((volatile unsigned char*)(ATA_IOBASE + 0x18)))
-#define ATA_COMMAND     (*((volatile unsigned char*)(ATA_IOBASE + 0x1c)))
-
-#define STATUS_BSY      0x80
-#define STATUS_RDY      0x40
-#define STATUS_DF       0x20
-#define STATUS_DRQ      0x08
-#define STATUS_ERR      0x01
-#define ERROR_ABRT      0x04
-
-#define WRITE_PATTERN1 0xa5
-#define WRITE_PATTERN2 0x5a
-#define WRITE_PATTERN3 0xaa
-#define WRITE_PATTERN4 0x55
-
-#define READ_PATTERN1 0xa5
-#define READ_PATTERN2 0x5a
-#define READ_PATTERN3 0xaa
-#define READ_PATTERN4 0x55
-
-#define READ_PATTERN1_MASK 0xff
-#define READ_PATTERN2_MASK 0xff
-#define READ_PATTERN3_MASK 0xff
-#define READ_PATTERN4_MASK 0xff
-
-#define SET_REG(reg,val) reg = (val)
-#define SET_16BITREG(reg,val) reg = (val)
-
-
-void ata_reset(void);
-void ata_enable(bool on);
-bool ata_is_coldstart(void);
-void ata_device_init(void);