Move X5 ADC code to target tree. Fix power button detection on H10. New ADC

driver for H10. Thanks to Laurent Baum for all his help with this code.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10701 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 68 insertions, 5 deletions

diff --git a/firmware/target/arm/iriver/h10/adc-h10.c b/firmware/target/arm/iriver/h10/adc-h10.c
index 0e17ae4f91..b3a36e6b39 100755
--- a/firmware/target/arm/iriver/h10/adc-h10.c
+++ b/firmware/target/arm/iriver/h10/adc-h10.c
@@ -23,19 +23,82 @@
 #include "thread.h"
 #include "adc.h"
 
-/* TODO: implement adc functionality */
+static unsigned short adcdata[NUM_ADC_CHANNELS];
+
+/* Scan ADC so that adcdata[channel] gets updated */
 unsigned short adc_scan(int channel)
 {
-    (void)channel;
-    return 0;
+    unsigned int adc_data_1;
+    unsigned int adc_data_2;
+
+    /* Initialise */
+    ADC_ADDR=0x130;
+    ADC_STATUS=0;   /* 4 bytes, 1 per channel. Each byte is 0 if the channel is
+                       off, 0x40 if the channel is on */
+    
+    /* Enable Channel */
+    ADC_ADDR |= (0x1000000<<channel);
+    
+    /* Start? */
+    ADC_ADDR |= 0x20000000;
+    ADC_ADDR |= 0x80000000;
+    
+    /* Wait 50ms for things to settle */
+    sleep(HZ/20);
+    
+    /* ADC_DATA_1 and ADC_DATA_2 are both four bytes, one byte per channel.
+       For each channel, ADC_DATA_1 stores the 8-bit msb, ADC_DATA_2 stores the
+       2-bit lsb (in bits 0 and 1). Each channel is 10 bits total. */
+    adc_data_1 = ((ADC_DATA_1 >> (8*channel)) & 0xff);
+    adc_data_2 = ((ADC_DATA_2 >> (8*channel+6)) & 0x3);
+    
+    adcdata[channel] = (adc_data_1<<2 | adc_data_2);
+    
+    return adcdata[channel];
 }
 
+/* Read 10-bit channel data */
 unsigned short adc_read(int channel)
 {
-    (void)channel;
-    return 0;
+    return adcdata[channel];
+}
+
+static int adc_counter;
+
+static void adc_tick(void)
+{
+    if(++adc_counter == HZ)
+    {
+        adc_counter = 0;
+        adc_scan(ADC_BATTERY);
+        adc_scan(ADC_UNKNOWN_1);
+        adc_scan(ADC_UNKNOWN_2);
+        adc_scan(ADC_SCROLLPAD);
+    }
 }
 
 void adc_init(void)
 {
+    /* Enable ADC */
+    ADC_ENABLE_ADDR |= ADC_ENABLE;
+    
+    /* Initialise */
+    ADC_INIT=0;
+    ADC_ADDR=0x130;
+    ADC_STATUS=0;
+    
+    /* Enable Channels 1-4 */
+    ADC_ADDR |= 0x1000000;
+    ADC_ADDR |= 0x2000000;
+    ADC_ADDR |= 0x4000000;
+    ADC_ADDR |= 0x8000000;
+    
+    /* Start? */
+    ADC_ADDR |= 0x20000000;
+    ADC_ADDR |= 0x80000000;
+    
+    /* Wait 50ms for things to settle */
+    sleep(HZ/20);
+    
+    tick_add_task(adc_tick);
 }