Gigabeat S (imx31): Begin voltage and frequency scaling code. For now, to avoid overdrive voltage, just lower core voltage to 1.35V since voltage scaling shouldn't be required for frequencies lower than 399 MHz (according to Freescale BSP, which set all working points to 1.35V for those frequencies). Perhaps battery life will improve as well (cross fingers :).

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25506 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 48 insertions, 0 deletions

diff --git a/firmware/target/arm/imx31/dvfs_dptc-imx31.c b/firmware/target/arm/imx31/dvfs_dptc-imx31.c
new file mode 100644
index 0000000000..8f32fd0fba
--- /dev/null
+++ b/firmware/target/arm/imx31/dvfs_dptc-imx31.c
@@ -0,0 +1,48 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2010 by Michael Sevakis
+ *
+ * i.MX31 DVFS and DPTC drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+#include "system.h"
+#include "ccm-imx31.h"
+#include "mc13783.h"
+
+/* Most of the code in here is based upon the Linux BSP provided by Freescale
+ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. */
+
+void dvfs_dptc_start(void)
+{
+    /* For now, just set the regulator voltage off of overdrive mode */
+    /* For 264 MHz, DPTC is not needed and lower V can be used */
+
+    mc13783_write_masked(MC13783_SWITCHERS0,
+                         MC13783_SW_1_350 << MC13783_SW1A_POS,
+                         MC13783_SW1A);
+    imx31_regmod32(&CCM_PMCR0, CCM_PMCR0_DVS1_0_DVS0_0,
+                   CCM_PMCR0_DVSUP_DVS);           
+}
+
+
+void dvfs_dptc_stop(void)
+{
+    /* Nothing for now */
+}
+