imx233: add uartdbg driver

The driver is current unused and very minimal. It can used on
targets which have an accessible UART port and it will be used on
some creative targets as backlight control.

Change-Id: Id710d63574aadb0a2d7327b03187506b469470b1

2 files changed, 109 insertions, 0 deletions

diff --git a/firmware/target/arm/imx233/uartdbg-imx233.c b/firmware/target/arm/imx233/uartdbg-imx233.c
new file mode 100644
index 0000000000..077b405f49
--- /dev/null
+++ b/firmware/target/arm/imx233/uartdbg-imx233.c
@@ -0,0 +1,74 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2013 by Lorenzo Miori
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "uartdbg-imx233.h"
+#include "pinctrl-imx233.h"
+#include "clkctrl-imx233.h"
+
+void imx233_uartdbg_init(unsigned long baud)
+{
+    /* Enable UART clock */
+    imx233_clkctrl_enable(CLK_UART, true);
+    /* Configure UART pins */
+    imx233_pinctrl_setup_vpin(VPIN_UARTDBG_TX, "uartdbg tx", PINCTRL_DRIVE_4mA, false);
+    imx233_pinctrl_setup_vpin(VPIN_UARTDBG_RX, "uartdbg rx", PINCTRL_DRIVE_4mA, false);
+
+    /* Set baud rate */
+    HW_UARTDBG_IBRD = baud >> 16;
+    HW_UARTDBG_FBRD = baud & 0xFFFF;
+
+    /* Set port options (actually needed to set baud rate), 8 bit char, enable FIFO buffer */
+    BF_WR(UARTDBG_LCR_H, WLEN, 3);
+    BF_WR(UARTDBG_LCR_H, FEN, 1);
+
+    /* Finally enable UART device, TX enable, RX enable, device enable */
+    BF_WR(UARTDBG_CR, TXE, 1);
+    BF_WR(UARTDBG_CR, RXE, 1);
+    BF_WR(UARTDBG_CR, UARTEN, 1);
+}
+
+void imx233_uartdbg_send(unsigned char data)
+{
+    /* Wait to transmit if TX FIFO buffer is full*/
+    while (BF_RD(UARTDBG_FR, TXFF));
+    BF_WR(UARTDBG_DR, DATA, data);
+}
+
+void uart_tx(const char* data)
+{
+    while (*data != 0)
+        imx233_uartdbg_send(*data++);
+}
+
+unsigned int uart_rx(char* rx_buf, unsigned int len)
+{
+    unsigned int i = 0;
+
+    while(i < len)
+    {
+        /* Check if the UART Rx Buffer has something into -> RXFE */
+        if(!BF_RD(UARTDBG_FR, RXFE))
+        {
+            rx_buf[i] = HW_UARTDBG_DR;
+            i++;
+        }
+    }
+    return i;
+}
\ No newline at end of file
diff --git a/firmware/target/arm/imx233/uartdbg-imx233.h b/firmware/target/arm/imx233/uartdbg-imx233.h
new file mode 100644
index 0000000000..3ee5175a21
--- /dev/null
+++ b/firmware/target/arm/imx233/uartdbg-imx233.h
@@ -0,0 +1,35 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2013 by Lorenzo Miori
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "system.h"
+#include "regs/regs-uartdbg.h"
+
+/* This values below are valid with a XCLK of 24MHz */
+#define BAUD_9600               (uint32_t)(156 << 16 | 16)
+#define BAUD_19200              (uint32_t)(78 << 16 | 2)
+#define BAUD_38400              (uint32_t)(39 << 16 | 4)
+#define BAUD_57600              (uint32_t)(26 << 16 | 3)
+#define BAUD_115200             (uint32_t)(13 << 16 | 1)
+
+void imx233_uartdbg_init(unsigned long baud);
+void imx233_uartdbg_send(unsigned char data);
+
+void uart_tx(const char* data);
+unsigned int uart_rx(char* rx_buf, unsigned int len);
\ No newline at end of file