Remove Samsung YP-Z5 port

It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.

Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747

2 files changed, 0 insertions, 208 deletions

diff --git a/firmware/export/config.h b/firmware/export/config.h
index 702b821856..383677865f 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -145,7 +145,6 @@
 #define MA_PAD            56
 #define SONY_NWZ_PAD       57
 #define CREATIVE_ZEN_PAD   58
-#define SAMSUNG_YPZ5_PAD   59
 #define IHIFI_PAD          60
 #define SAMSUNG_YPR1_PAD   61
 #define SAMSUNG_YH92X_PAD  62
@@ -264,7 +263,6 @@
 #define LCD_CREATIVEZENMOZAIC 56 /* as used by the Creative ZEN Mozaic (FGD0801) */
 #define LCD_ILI9342C   57 /* another type of lcd used by HiFi E.T MA9/MA8 */
 #define LCD_CREATIVEZENV  58 /* as used by the Creative Zen V (Plus) */
-#define LCD_SAMSUNGYPZ5   59 /* as used by Samsung YP-Z5 */
 #define LCD_IHIFI         60 /* as used by IHIFI 760/960 */
 #define LCD_CREATIVEZENXFISTYLE 61 /* as used by Creative Zen X-Fi Style */
 #define LCD_SAMSUNGYPR1   62 /* as used by Samsung YP-R1 */
@@ -543,8 +541,6 @@ Lyre prototype 1 */
 #include "config/sonynwze370.h"
 #elif defined(SONY_NWZE360)
 #include "config/sonynwze360.h"
-#elif defined(SAMSUNG_YPZ5)
-#include "config/samsungypz5.h"
 #elif defined(IHIFI760)
 #include "config/ihifi760.h"
 #elif defined(IHIFI770)
diff --git a/firmware/export/config/samsungypz5.h b/firmware/export/config/samsungypz5.h
deleted file mode 100644
index 2af62c1cbe..0000000000
--- a/firmware/export/config/samsungypz5.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * This config file is for the Samsung YP-Z5
- */
-#define IMX233_SUBTARGET        3600
-#define IMX233_PACKAGE          IMX233_BGA169
-#define IMX233_PARTITIONS       IMX233_FREESCALE
-
-/* For Rolo and boot loader */
-#define MODEL_NUMBER            84
-#define MODEL_NAME              "Samsung YP-Z5"
-/* Define if boot data from bootloader has been enabled for the target */
-#define HAVE_BOOTDATA
-
-#define HW_SAMPR_CAPS           SAMPR_CAP_ALL_48
-
-/* define this if you have recording possibility */
-#define HAVE_RECORDING
-
-#define REC_SAMPR_CAPS          SAMPR_CAP_ALL_48
-
-/* Default recording levels */
-#define DEFAULT_REC_MIC_GAIN    23
-#define DEFAULT_REC_LEFT_GAIN   23
-#define DEFAULT_REC_RIGHT_GAIN  23
-
-/* Define bitmask of input sources - recordable bitmask can be defined
-   explicitly if different */
-#define HAVE_FMRADIO_IN
-#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
-
-
-
-/* define this if you have a colour LCD */
-#define HAVE_LCD_COLOR
-
-#ifndef BOOTLOADER
-#define HAVE_ALBUMART
-
-/* define this to enable bitmap scaling */
-#define HAVE_BMP_SCALING
-
-/* define this to enable JPEG decoding */
-#define HAVE_JPEG
-
-/* Define this if a programmable hotkey is mapped */
-#define HAVE_HOTKEY
-
-/* define this if you have access to the quickscreen */
-#define HAVE_QUICKSCREEN
-
-/* define this if you would like tagcache to build on this target */
-#define HAVE_TAGCACHE
-
-/* define this if the target has volume keys which can be used in the lists */
-#define HAVE_VOLUME_IN_LIST
-
-/* define this if you have LCD enable function */
-//#define HAVE_LCD_ENABLE
-
-/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
-   should be defined as well.
-#define HAVE_LCD_SLEEP
-#define HAVE_LCD_SLEEP_SETTING
-*/
-
-/* define this if you can flip your LCD
-#define HAVE_LCD_FLIP
-*/
-
-/* define this if you can invert the colours on your LCD
-#define HAVE_LCD_INVERT
-*/
-
-/* define this if you have a real-time clock */
-#define CONFIG_RTC RTC_IMX233
-
-/* define this if you have a real-time clock with alarm facilities */
-#define HAVE_RTC_ALARM
-
-#endif /* !BOOTLOADER */
-
-/* define this if you have an i.MX23 codec */
-#define HAVE_IMX233_CODEC
-
-#define CONFIG_TUNER TEA5767
-#define CONFIG_TUNER_XTAL 32768
-
-/* There is no hardware tone control */
-#define HAVE_SW_TONE_CONTROLS
-
-#define CONFIG_KEYPAD SAMSUNG_YPZ5_PAD
-#define HAVE_TOUCHPAD_IMX233
-
-/* Define this to enable morse code input */
-#define HAVE_MORSE_INPUT
-
-
-
-
-/* LCD dimensions */
-#define LCD_WIDTH  128
-#define LCD_HEIGHT 160
-/* sqrt(128^2 + 160^2) / 1.8 = 113.8 */
-#define LCD_DPI 114
-#define LCD_DEPTH  16   /* 65536 colours */
-#define LCD_PIXELFORMAT RGB565 /* rgb565 */
-
-/* Define this if you have a software controlled poweroff */
-#define HAVE_SW_POWEROFF
-
-/* Some devices seem to be FAT16 formatted */
-#define HAVE_FAT16SUPPORT
-
-/* The number of bytes reserved for loadable codecs */
-#define CODEC_SIZE 0x100000
-
-/* The number of bytes reserved for loadable plugins */
-#define PLUGIN_BUFFER_SIZE 0x80000
-
-#define AB_REPEAT_ENABLE
-
-/* Define this for LCD backlight available */
-#define HAVE_BACKLIGHT
-#define HAVE_BACKLIGHT_BRIGHTNESS
-
-/* Main LCD backlight brightness range and defaults */
-#define MIN_BRIGHTNESS_SETTING      1
-#define MAX_BRIGHTNESS_SETTING      18
-#define DEFAULT_BRIGHTNESS_SETTING  5
-
-/* Which backlight fading type? */
-#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
-
-/* define this if you have a flash memory storage */
-//#define HAVE_FLASH_STORAGE
-
-#define CONFIG_STORAGE (STORAGE_RAMDISK)
-//#define CONFIG_NAND NAND_IMX233
-//#define NUM_DRIVES  0
-
-/* Extra threads: touchpad and rds */
-//#define TARGET_EXTRA_THREADS 2
-
-/* todo */
-#define BATTERY_CAPACITY_DEFAULT 550    /* default battery capacity */
-#define BATTERY_CAPACITY_MIN 550        /* min. capacity selectable */
-#define BATTERY_CAPACITY_MAX 550        /* max. capacity selectable */
-#define BATTERY_CAPACITY_INC 0          /* capacity increment */
-#define BATTERY_TYPES_COUNT  1          /* only one type */
-
-#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
-
-/* Charging implemented in a target-specific algorithm */
-#define CONFIG_CHARGING CHARGING_TARGET
-
-/* define this if the unit can be powered or charged via USB */
-#define HAVE_USB_POWER
-
-/* Define this if you have an IMX233*/
-#define CONFIG_CPU IMX233
-
-/* Define this if you want to use the IMX233 i2c interface */
-#define CONFIG_I2C I2C_IMX233
-
-/* define current usage levels (based on battery bench) */
-#define CURRENT_NORMAL     35
-#define CURRENT_BACKLIGHT  30
-#define CURRENT_RECORD     CURRENT_NORMAL
-
-/* maximum charging current */
-#define CURRENT_MAX_CHG   200
-
-/* Define this to the CPU frequency */
-#define CPU_FREQ      454000000
-
-/* Type of LCD */
-#define CONFIG_LCD LCD_SAMSUNGYPZ5
-
-/* Offset ( in the firmware file's header ) to the file CRC and data. These are
-   only used when loading the old format rockbox.e200 file */
-#define FIRMWARE_OFFSET_FILE_CRC    0x0
-#define FIRMWARE_OFFSET_FILE_DATA   0x8
-
-/* USB On-the-go */
-#define CONFIG_USBOTG USBOTG_ARC
-
-/* enable these for the experimental usb stack */
-#define HAVE_USBSTACK
-#define USB_VENDOR_ID 0x04e8
-#define USB_PRODUCT_ID 0x5041
-#define HAVE_USB_HID_MOUSE
-#define HAVE_BOOTLOADER_USB_MODE
-
-/* Define this if you have adjustable CPU frequency */
-//#define HAVE_ADJUSTABLE_CPU_FREQ
-
-/* Virtual LED (icon) */
-#define CONFIG_LED LED_VIRTUAL
-
-#define BOOTFILE_EXT    "samsung"
-#define BOOTFILE        "rockbox." BOOTFILE_EXT
-#define BOOTDIR         "/.rockbox"
-
-#define INCLUDE_TIMEOUT_API