ata: Rework how flushing, sleeping, and power off interacts

 * FLUSH_EXT is used if featureflag is set and we are using LBA48
   (unconditionally used for CE-ATA on ipod6g)
 * FLUSH is used if featureflag is set (ATA6+) or if device claims to be ATA5+

 * Rename ata_disk_can_power_off() to ata_disk_can_sleep() as that is
   what it actually tests for.  Only use it to gate issuing the
   STANDBY IMMEDIATE command.
 * Restore behavior of ata_disk_is_active() to return 1 if drive is
   "spinning" or powered up.
 * Allow poweroff if drive claims PM support OR we are able to issue
   FLUSH/FLUSH_EXT commands.

 * Added ata_flush() to explicitly trigger a flush operation, and hook it
   up to storage_flush() in the device shutdown path. (Flushes were
   only previously used in the storage device power management path)

 * After issuing all settings, re-issue IDENTIFY_DEVICE to make sure
   it reflects everything we've enabled.

 * Update manual section on Flash/SSD mods.

Change-Id: I6770a54ef3a87f4c47120bcb96c944a6652f1bf4

1 files changed, 1 insertions, 1 deletions

diff --git a/firmware/export/storage.h b/firmware/export/storage.h
index e2ae4056be..f97cbf34d5 100644
--- a/firmware/export/storage.h
+++ b/firmware/export/storage.h
@@ -174,7 +174,7 @@ static inline void storage_sleep(void) {};
         #define storage_disk_is_active() ata_disk_is_active()
         #define storage_soft_reset() ata_soft_reset()
         #ifdef HAVE_STORAGE_FLUSH
-            #define storage_flush() (void)0
+            #define storage_flush() ata_flush()
         #endif
         #define storage_last_disk_activity() ata_last_disk_activity()
         #define storage_spinup_time() ata_spinup_time()