Rename targets to be consistent in all places. (FS #10819)

git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23881 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 142 insertions, 0 deletions

diff --git a/firmware/export/config/tatungtpj1022.h b/firmware/export/config/tatungtpj1022.h
new file mode 100644
index 0000000000..cdb1eb93ac
--- /dev/null
+++ b/firmware/export/config/tatungtpj1022.h
@@ -0,0 +1,142 @@
+/*
+ * This config file is for the Tatung Elio TPJ-1022
+ */
+
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define MODEL_NAME "Tatung Elio TPJ-1022"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 15
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* define this if you have recording possibility */
+/*#define HAVE_RECORDING*/ /* TODO: add support for this */
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
+                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
+
+/* define the bitmask of recording sample rates
+#define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
+                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* LCD dimensions */
+#define LCD_WIDTH  220
+#define LCD_HEIGHT 176
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565 
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD ELIO_TPJ1022_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+//#define CONFIG_RTC RTC_E8564
+#endif
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have the WM8731 audio codec */
+#define HAVE_WM8731
+
+#define AB_REPEAT_ENABLE 1
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
+                                        TODO: check this, probably different
+                                        for different models too */
+#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 10   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+
+/* Hardware controlled charging? FIXME */
+#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define this if the unit can be powered or charged via USB */
+/*#define HAVE_USB_POWER*/
+
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5020 */
+#define CONFIG_CPU PP5020
+
+/* Define this if you want to use the PP5020 i2c interface */
+#define CONFIG_I2C I2C_PP5020
+
+/* define this if the hardware can be powered off while charging */
+/* TODO: should this be set for the H10? */
+//#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* Define this to the CPU frequency */
+/* TODO: this is probably wrong */
+#define CPU_FREQ      11289600
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_TPJ1022
+
+#define DEFAULT_CONTRAST_SETTING    19
+
+/* Offset ( in the firmware file's header ) to the file length */
+#define FIRMWARE_OFFSET_FILE_LENGTH 0
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* enable these for the experimental usb stack ROOLKU */
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x07B4
+#define USB_PRODUCT_ID 0x0280
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT "elio"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#endif