Rename targets to be consistent in all places. (FS #10819)

git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23881 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 196 insertions, 0 deletions

diff --git a/firmware/export/config/gogearsa9200.h b/firmware/export/config/gogearsa9200.h
new file mode 100644
index 0000000000..7af50b5145
--- /dev/null
+++ b/firmware/export/config/gogearsa9200.h
@@ -0,0 +1,196 @@
+/*
+ * This config file is for the Philips GoGear SA9200
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 34
+#define MODEL_NAME   "Philips GoGear SA200"
+
+#define HW_SAMPR_CAPS       (SAMPR_CAP_44)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have a light associated with the buttons */
+#define HAVE_BUTTON_LIGHT
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 160
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+#ifndef BOOTLOADER
+/* define this if you have LCD enable function */
+#define HAVE_LCD_ENABLE
+
+/* Define this if your LCD can be put to sleep.
+   HAVE_LCD_ENABLE should be defined as well. */
+#define HAVE_LCD_SLEEP
+#define HAVE_LCD_SLEEP_SETTING
+#endif
+
+/* define this if you can flip your LCD */
+#define HAVE_LCD_FLIP
+
+/* define this if you can invert the colours on your LCD */
+#define HAVE_LCD_INVERT
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD PHILIPS_SA9200_PAD
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+/* The PP5024 has a built-in AustriaMicrosystems AS3514 */
+#define HAVE_AS3514
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+#define CONFIG_RTC RTC_AS3514
+#endif
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* Some Sansa E200s seem to be FAT16 formatted */
+#define HAVE_FAT16SUPPORT
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE 1
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING     12
+#define DEFAULT_BRIGHTNESS_SETTING  6
+
+/* Which backlight fading type? */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
+
+/* define this if you have a light associated with the buttons */
+#define HAVE_BUTTON_LIGHT
+/* Can't control the brightness on all the buttons */
+/* #define HAVE_BUTTONLIGHT_BRIGHTNESS */
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if the flash memory uses the SecureDigital Memory Card protocol */
+#define CONFIG_STORAGE STORAGE_SD
+
+#define BATTERY_CAPACITY_DEFAULT 750    /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0          /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Charging implemented in a target-specific algorithm */
+#define CONFIG_CHARGING CHARGING_TARGET
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* define current usage levels (copied from the e200v1 )*/
+#define CURRENT_NORMAL     30  /* Toni's measurements in Nov 2008  */
+#define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
+#define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/** Non-simulator section **/
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5024 */
+#define CONFIG_CPU PP5024
+
+/* Define this if you want to use the PP5024 i2c interface */
+#define CONFIG_I2C I2C_PP5024
+
+/* define this if the hardware can be powered off while charging */
+/* Sansa can't be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 75000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_SA9200
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING       31
+#define DEFAULT_CONTRAST_SETTING   22 /* Match boot contrast */
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USE_ROCKBOX_USB
+#define USB_VENDOR_ID 0x0471
+#define USB_PRODUCT_ID 0x014f
+
+/* WARNING! Enable Rockbox USB mass storage. */
+#ifndef BOOTLOADER
+#define USE_ROCKBOX_USB
+#endif
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define MI4_FORMAT
+#define BOOTFILE_EXT    "mi4"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+/* These values are unused, but need to be defined */
+#define FIRMWARE_OFFSET_FILE_CRC    0x0
+#define FIRMWARE_OFFSET_FILE_DATA   0x8
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#define INCLUDE_TIMEOUT_API
+
+#endif /* SIMULATOR */