My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 189 insertions, 0 deletions

diff --git a/firmware/export/config-hdd1630.h b/firmware/export/config-hdd1630.h
new file mode 100755
index 0000000000..19ca190a57
--- /dev/null
+++ b/firmware/export/config-hdd1630.h
@@ -0,0 +1,189 @@
+/*
+ * This config file is for the iriver H10 20Gb
+ */
+
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 31
+#define MODEL_NAME   "Philips GoGear HDD1630"
+
+/* define this if you use an ATA controller */
+#define HAVE_ATA
+
+/* define this if you have recording possibility */
+/* #define HAVE_RECORDING */
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_44)
+
+/* define the bitmask of recording sample rates */
+#define REC_SAMPR_CAPS  (SAMPR_CAP_44)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 128
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
+
+#ifndef BOOTLOADER
+/* Define this if your LCD can be enabled/disabled */
+/* #define HAVE_LCD_ENABLE */
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+ * should be defined as well.
+ * We can currently put the lcd to sleep but it won't wake up properly */
+/* #define HAVE_LCD_SLEEP */
+/* #define HAVE_LCD_SLEEP_SETTING */
+#endif
+
+/* define this if you can flip your LCD */
+/* #define HAVE_LCD_FLIP */
+
+/* define this if you can invert the colours on your LCD */
+/* #define HAVE_LCD_INVERT */
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD PHILIPS_HDD1630_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+/* #define CONFIG_RTC RTC_E8564 */
+/* #define HAVE_RTC_ALARM */
+#endif
+
+/* Define this if you have a software controlled poweroff */
+/* #define HAVE_SW_POWEROFF */
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have the WM8731 audio codec */
+#define HAVE_WM8731
+
+/* WM8731 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+#define AB_REPEAT_ENABLE 1
+
+/* FM Tuner */
+/* #define CONFIG_TUNER TEA5767 */
+/* #define CONFIG_TUNER_XTAL  32768 */
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+/* #define HAVE_BACKLIGHT_BRIGHTNESS */
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING     12
+#define DEFAULT_BRIGHTNESS_SETTING  6
+
+/* define this if you have a light associated with the buttons */
+/* #define HAVE_BUTTON_LIGHT */
+
+#define AB_REPEAT_ENABLE 1
+
+#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 50   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+
+/* Hardware controlled charging */
+/* #define CONFIG_CHARGING CHARGING_SIMPLE */
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5020 */
+#define CONFIG_CPU PP5022
+
+/* Define this if you want to use the PP5020 i2c interface */
+#define CONFIG_I2C I2C_PP5020
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x100000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      75000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_HDD1630
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING        30
+#define DEFAULT_CONTRAST_SETTING    14 /* Match boot contrast */
+
+/* We're able to shut off power to the HDD */
+/* #define HAVE_ATA_POWER_OFF */
+
+/* Offset ( in the firmware file's header ) to the file CRC and data. These are
+   only used when loading the old format rockbox.e200 file */
+#define FIRMWARE_OFFSET_FILE_CRC    0x0
+#define FIRMWARE_OFFSET_FILE_DATA   0x8
+
+/* #define USB_IPODSTYLE */
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x0471
+#define USB_PRODUCT_ID 0x014C
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define MI4_FORMAT
+#define BOOTFILE_EXT    "mi4"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#endif