Reverted r23881 mistakenly committed to branch.v3.4

git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23882 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 131 insertions, 0 deletions

diff --git a/firmware/export/config-c100.h b/firmware/export/config-c100.h
new file mode 100644
index 0000000000..5cc29e32f6
--- /dev/null
+++ b/firmware/export/config-c100.h
@@ -0,0 +1,131 @@
+/*
+ * This config file is for the Sansa C100 series
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define MODEL_NAME "Sandisk Sansa c100 series"
+
+/* For Rolo and bootloader */
+#define MODEL_NUMBER 30
+
+/* define hardware samples rate caps mask */
+#define HW_SAMPR_CAPS   (/*SAMPR_CAP_88 | */SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you can flip your LCD */
+/*#define HAVE_LCD_FLIP*/
+
+/* define this if you can invert the colours on your LCD */
+/*#define HAVE_LCD_INVERT*/
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* Only v1 */
+#define CONFIG_STORAGE STORAGE_NAND
+#define CONFIG_NAND NAND_TCC
+
+/* c100's with direct-to-NAND access are FAT16 */
+#define HAVE_FAT16SUPPORT
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 64
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565   /*rgb565*/
+
+/*#define LCD_PIXELFORMAT VERTICAL_PACKING*/
+
+/* define this to indicate your device's keypad */
+#define CONFIG_KEYPAD SANSA_C100_PAD
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_TCC77X
+
+/* define this if you have RTC RAM available for settings */
+//#define HAVE_RTC_RAM
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x50000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x50000
+
+#define AB_REPEAT_ENABLE 1
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* Define this if you have the TLV320 audio codec */
+#define HAVE_TLV320
+
+/*#define CONFIG_TUNER TEA5767*/
+
+/* TLV320 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define CONFIG_I2C I2C_TCC77X
+
+#define BATTERY_CAPACITY_DEFAULT 540 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 540 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 540 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 50   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+
+/* define this if the unit should not shut down on low battery. */
+#define NO_LOW_BATTERY_SHUTDOWN
+
+#ifndef SIMULATOR
+
+/* Define this if you have a TCC770 */
+#define CONFIG_CPU TCC770
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      120000000
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* The start address index for ROM builds */
+/* #define ROM_START 0x11010 for behind original Archos */
+#define ROM_START 0x7010 /* for behind BootBox */      
+
+#define CONFIG_LCD LCD_S6B33B2 
+
+#define BOOTFILE_EXT "c100"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#ifdef BOOTLOADER
+#define TCCBOOT
+#endif
+
+#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
+
+#endif /* SIMULATOR */