iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE().

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16684 a1c6a512-1295-4272-9138-f99709370657

10 files changed, 195 insertions, 26 deletions

diff --git a/firmware/SOURCES b/firmware/SOURCES
index ea8ce46cca..cf96d48e72 100644
--- a/firmware/SOURCES
+++ b/firmware/SOURCES
@@ -504,9 +504,9 @@ target/coldfire/iaudio/m3/button-m3.c
 target/coldfire/iaudio/m3/fmradio_i2c-m3.c
 target/coldfire/iaudio/m3/lcd-m3.c
 target/coldfire/iaudio/m3/power-m3.c
+target/coldfire/iaudio/m3/powermgmt-m3.c
 target/coldfire/iaudio/m3/system-m3.c
 target/coldfire/iaudio/m3/usb-m3.c
-target/coldfire/iaudio/powermgmt-iaudio.c
 #ifndef BOOTLOADER
 target/coldfire/iaudio/m3/audio-m3.c
 #endif
diff --git a/firmware/panic.c b/firmware/panic.c
index 58f6d1dcb5..0ac458953b 100644
--- a/firmware/panic.c
+++ b/firmware/panic.c
@@ -108,10 +108,12 @@ void panicf( const char *fmt, ...)
         #define system_reboot() nop
 #elif defined (TOSHIBA_GIGABEAT_F)
         if ((GPGDAT & (1 << 0)) != 0)
-#elif defined (IRIVER_H100_SERIES)
-        if ((GPIO1_READ & 0x22) == 0) /* check for ON button and !hold */
-#elif defined(IRIVER_H300_SERIES)
+#elif defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
         if ((GPIO1_READ & 0x22) == 0) /* check for ON button and !hold */
+#elif defined(IAUDIO_X5) || defined(IAUDIO_M5)
+        if ((GPIO_READ & 0x0c000000) == 0x08000000) /* check for ON button and !hold */
+#elif defined(IAUDIO_M3)
+        if ((GPIO1_READ & 0x202) == 0x200) /* check for ON button and !hold */
 #elif CONFIG_CPU == SH7034
 #if CONFIG_KEYPAD == PLAYER_PAD
         if (!(PADRL & 0x20))
diff --git a/firmware/target/coldfire/i2c-coldfire.c b/firmware/target/coldfire/i2c-coldfire.c
index 06c196792f..83d8db4048 100644
--- a/firmware/target/coldfire/i2c-coldfire.c
+++ b/firmware/target/coldfire/i2c-coldfire.c
@@ -56,15 +56,16 @@ void i2c_init(void)
     
     /* I2C Clock divisor = 160 => 124.1556 MHz / 2 / 160 = 388.08 kHz */
     MFDR  = 0x0d;
-    MFDR2 = 0x0d;
 
-#if defined(IAUDIO_X5) || defined(IAUDIO_M5)
-    MBCR  = IEN;  /* Enable interface */
-    MBCR2 = IEN; 
-#endif
+#if defined(IAUDIO_M3)
+    MBCR  = IEN;  /* Enable interface 1 */
+    /* secondary channel is handled in the interrupt driven ADC driver */
+#elif defined(IAUDIO_X5) || defined(IAUDIO_M5)
+    MBCR  = IEN;  /* Enable interface 1 */
 
-#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
-    /* Audio Codec */
+    MFDR2 = 0x0d;
+    MBCR2 = IEN;  /* Enable interface 2 */
+#elif defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
     MBDR = 0;    /* iRiver firmware does this */
     MBCR = IEN;  /* Enable interface */
 #endif
@@ -156,7 +157,7 @@ int i2c_read(volatile unsigned char *iface, unsigned char addr,
             iface[O_MBCR] |= TXAK;
         else if (i == 1)
             /* Generate STOP before reading last byte received */
-            i2c_stop(iface); 
+            i2c_stop(iface);
 
         *buf++ = iface[O_MBDR];
     }
diff --git a/firmware/target/coldfire/iaudio/m3/adc-m3.c b/firmware/target/coldfire/iaudio/m3/adc-m3.c
index c4f8d92ae1..b0d7f7430b 100644
--- a/firmware/target/coldfire/iaudio/m3/adc-m3.c
+++ b/firmware/target/coldfire/iaudio/m3/adc-m3.c
@@ -18,15 +18,90 @@
  ****************************************************************************/
 
 #include "config.h"
-#include "cpu.h"
-#include "system.h"
-#include "kernel.h"
-#include "thread.h"
+
 #include "adc.h"
+#include "i2c-coldfire.h"
+#include "system.h"
+
+#define ADC_I2C_ADDR 0xa0
+
+/* The M3 ADC is hooked exclusively to the secondary I²C bus, and requires
+ * very slow transfers (I²C clock <= 16kHz). So we start one 4-byte read
+ * transfer each tick, and handle it via an ISR. At 11MHz, one transfer
+ * takes too long to be started every tick, but it seems we have to live 
+ * with that. */
+
+static unsigned char adc_data[NUM_ADC_CHANNELS] IBSS_ATTR;
+static volatile bool data_ready = false;
+
+
+static void adc_tick(void)
+{
+    if ((MBSR2 & IBB) == 0)   /* Bus is free */
+    {
+        MBCR2 |= (MSTA|TXAK|MTX); /* Generate START and prepare for write */
+        MBDR2 = ADC_I2C_ADDR|1;   /* Send address */
+    }
+}
 
-unsigned short adc_scan(int channel)
+void IIC2(void) __attribute__((interrupt_handler));
+void IIC2(void)
 {
-    /* TODO */
-    (void)channel;
-    return 0xff;
+    static int bytenum = 0;
+    
+    MBSR2 &= ~IFF;            /* Clear interrupt flag */
+
+    if (MBSR2 & IAL)          /* Arbitration lost - shouldn't happen */
+    {                         /* normally, but CPU freq change might induce it */
+        MBSR2 &= ~IAL;        /* Clear flag */
+        MBCR2 &= ~MSTA;       /* STOP */
+    }
+    else if (MBCR2 & MTX)     /* Address phase */
+    {
+        if (MBSR2 & RXAK)     /* No ACK received */
+        {
+            MBCR2 &= ~MSTA;   /* STOP */
+            return;
+        }
+        MBCR2 &= ~(MTX|TXAK); /* Switch to RX mode, enable TX ack generation */
+        MBDR2;                /* Dummy read */
+        bytenum = 0;
+    }
+    else
+    {
+        switch (bytenum)
+        {
+          case 2:
+            MBCR2 |= TXAK;    /* Don't ACK the last byte */
+            break;
+            
+          case 3:
+            MBCR2 &= ~MSTA;   /* STOP before reading the last value */
+            data_ready = true; /* Simplification - the last byte is a dummy. */
+            break;
+        }
+        adc_data[bytenum++] = MBDR2;
+    }
+
+}
+
+unsigned short adc_read(int channel)
+{
+    return adc_data[channel];
+}
+
+void adc_init(void)
+{
+    MFDR2 = 0x1f;             /* I²C clock = SYSCLK / 3840 */
+    MBCR2 = IEN;              /* Enable interface */
+    MBSR2 = 0;                /* Clear flags */
+    MBCR2 = (IEN|IIEN);       /* Enable interrupts */
+
+    and_l(~0x0f000000, &INTPRI8);
+    or_l(  0x04000000, &INTPRI8); /* INT62 - Priority 4 */
+
+    tick_add_task(adc_tick);
+    
+    while (!data_ready)
+        sleep(1);             /* Ensure valid readings when adc_init returns */
 }
diff --git a/firmware/target/coldfire/iaudio/m3/adc-target.h b/firmware/target/coldfire/iaudio/m3/adc-target.h
new file mode 100644
index 0000000000..e5ff818647
--- /dev/null
+++ b/firmware/target/coldfire/iaudio/m3/adc-target.h
@@ -0,0 +1,29 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Jens Arnold
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef _ADC_TARGET_H_
+#define _ADC_TARGET_H_
+
+#define NUM_ADC_CHANNELS 4
+
+#define ADC_BUTTONS 0
+#define ADC_BATTERY 1
+#define ADC_REMOTE  2
+
+#endif /* _ADC_TARGET_H_ */
diff --git a/firmware/target/coldfire/iaudio/m3/button-m3.c b/firmware/target/coldfire/iaudio/m3/button-m3.c
index c7c5b2e90f..ecea221a4c 100644
--- a/firmware/target/coldfire/iaudio/m3/button-m3.c
+++ b/firmware/target/coldfire/iaudio/m3/button-m3.c
@@ -56,7 +56,7 @@ int button_read_device(void)
 
     if (!hold_button)
     {
-        data = adc_scan(ADC_BUTTONS);
+        data = adc_read(ADC_BUTTONS);
 
         if (data < 0xc0)
         {
@@ -82,7 +82,7 @@ int button_read_device(void)
     }
 
     /* remote buttons */
-    data = remote_detect() ? adc_scan(ADC_REMOTE) : 0xff;
+    data = remote_detect() ? adc_read(ADC_REMOTE) : 0xff;
 
     remote_hold_button_old = remote_hold_button;
     remote_hold_button = data < 0x14;
diff --git a/firmware/target/coldfire/iaudio/m3/power-m3.c b/firmware/target/coldfire/iaudio/m3/power-m3.c
index 7b5af43026..52a5de3460 100644
--- a/firmware/target/coldfire/iaudio/m3/power-m3.c
+++ b/firmware/target/coldfire/iaudio/m3/power-m3.c
@@ -36,6 +36,10 @@ void power_init(void)
     /* Charger detect */
     and_l(~0x00000020, &GPIO1_ENABLE);
     or_l(0x00000020, &GPIO1_FUNCTION);
+                                                        
+    /* FIXME: Just disable the multi-colour LED for now. */
+    and_l(~0x00000210, &GPIO1_OUT);
+    and_l(~0x00008000, &GPIO_OUT);
 }
 
 bool charger_inserted(void)
diff --git a/firmware/target/coldfire/iaudio/m3/powermgmt-m3.c b/firmware/target/coldfire/iaudio/m3/powermgmt-m3.c
new file mode 100644
index 0000000000..8c94947785
--- /dev/null
+++ b/firmware/target/coldfire/iaudio/m3/powermgmt-m3.c
@@ -0,0 +1,57 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 Jens Arnold
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+#include "adc.h"
+#include "powermgmt.h"
+
+const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
+{
+    3540
+};
+
+const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
+{
+    3500
+};
+
+/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
+const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
+{
+    /* average measured values from X5 and M5L */
+    { 3500, 3650, 3720, 3740, 3760, 3790, 3840, 3900, 3950, 4040, 4120 }
+};
+
+/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
+const unsigned short percent_to_volt_charge[11] =
+{
+    /* TODO: This is identical to the discharge curve.
+     * Calibrate charging curve using a battery_bench log. */
+    3500, 3650, 3720, 3740, 3760, 3790, 3840, 3900, 3950, 4040, 4120
+};
+
+#define BATTERY_SCALE_FACTOR  5720
+/* full-scale ADC readout (2^8) in millivolt */
+
+/* Returns battery voltage from ADC [millivolts] */
+unsigned int battery_adc_voltage(void)
+{
+    return (adc_read(ADC_BATTERY) * BATTERY_SCALE_FACTOR) >> 8;
+}
+
diff --git a/firmware/target/coldfire/iaudio/powermgmt-iaudio.c b/firmware/target/coldfire/iaudio/powermgmt-iaudio.c
index c4d64e6155..6e2b19d9b6 100644
--- a/firmware/target/coldfire/iaudio/powermgmt-iaudio.c
+++ b/firmware/target/coldfire/iaudio/powermgmt-iaudio.c
@@ -53,10 +53,6 @@ const unsigned short percent_to_volt_charge[11] =
 /* Returns battery voltage from ADC [millivolts] */
 unsigned int battery_adc_voltage(void)
 {
-#ifdef IAUDIO_M3
-    return 4000; /* FIXME: fake value - no ADC yet */
-#else
     return (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) >> 10;
-#endif
 }
 
diff --git a/firmware/target/coldfire/system-coldfire.c b/firmware/target/coldfire/system-coldfire.c
index eca5440679..97e9d35aaa 100644
--- a/firmware/target/coldfire/system-coldfire.c
+++ b/firmware/target/coldfire/system-coldfire.c
@@ -144,6 +144,11 @@ default_interrupt (ADC);  /* A/D converter */
 #define EXCP_BUTTON_MASK        0x0c000000
 #define EXCP_BUTTON_VALUE       0x08000000 /* On button and !hold */
 #define EXCP_PLLCR              0x10400000
+#elif defined(IAUDIO_M3)
+#define EXCP_BUTTON_GPIO_READ   GPIO1_READ
+#define EXCP_BUTTON_MASK        0x00000202
+#define EXCP_BUTTON_VALUE       0x00000200 /* On button and !hold */
+#define EXCP_PLLCR              0x10800000
 #else
 #define EXCP_BUTTON_GPIO_READ   GPIO1_READ
 #define EXCP_BUTTON_MASK        0x00000022