Correct beast manual install instructions in Windows.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23467 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 6 insertions, 9 deletions

diff --git a/manual/getting_started/gigabeats_install.tex b/manual/getting_started/gigabeats_install.tex
index cf07e9e2cc..f831d8610a 100644
--- a/manual/getting_started/gigabeats_install.tex
+++ b/manual/getting_started/gigabeats_install.tex
@@ -40,8 +40,7 @@ information displayed about
 your \dap{} and a message asking you if you wish to install the Rockbox
 bootloader. Press i followed by ENTER, and beastpatcher will
 install the bootloader. After a short time you should see the message
-``[INFO] Bootloader installed successfully'' followed by some error
-messages that you can safely ignore. Press ENTER again to exit
+``[INFO] Bootloader installed successfully''. Press ENTER again to exit
 beastpatcher.
 
 \item[Dual Boot.]  Extract the \playerman{} firmware file \fname{nk.bin} from
@@ -54,15 +53,13 @@ to this directory, and then type the following commands:
 \end{code}
 
 After a short time you should see the message
-``[INFO] Bootloader installed successfully'' followed by some error
-messages that you can safely ignore. Press ENTER again to exit
+``[INFO] Bootloader installed successfully''. Press ENTER again to exit
 beastpatcher.
 
-\item After a successful installation, your \dap{} will immediately turn off.
-Turn it on again, and (because it is still connected to your PC)
-it will enter the Rockbox bootloader's
-``USB Mass Storage'' mode, which exposes your \daps{} disk to your computer
-as a standard USB Mass Storage device.
+\item After a successful installation, you need to disconnect your \dap{} from
+USB, and then immediately reconnect it. It should reboot then enter the Rockbox
+bootloader ``USB Mass Storage'' mode, which exposes your \daps{} disk to your
+computer as a standard USB Mass Storage device.
 \end{enumerate}
 
 \subsubsection{Bootloader installation from Mac OS X}